| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1514872229.2743.137.camel@kernel.crashing.org>
Date: Tue, 02 Jan 2018 16:50:29 +1100
From: Benjamin Herrenschmidt <benh@...nel.crashing.org>
To: Joel Stanley <joel@....id.au>, Lee Jones <lee.jones@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Andrew Jeffery <andrew@...id.au>, Jeremy Kerr <jk@...abs.org>,
Rick Altherr <raltherr@...gle.com>,
Ryan Chen <ryan_chen@...eedtech.com>,
Arnd Bergmann <arnd@...db.de>
Subject: Re: [PATCH v7 4/5] clk: aspeed: Register gated clocks
On Fri, 2017-12-22 at 13:15 +1030, Joel Stanley wrote:
> The majority of the clocks in the system are gates paired with a reset
> controller that holds the IP in reset.
>
> This borrows from clk_hw_register_gate, but registers two 'gates', one
> to control the clock enable register and the other to control the reset
> IP. This allows us to enforce the ordering:
>
> 1. Place IP in reset
> 2. Enable clock
> 3. Delay
> 4. Release reset
>
> There are some gates that do not have an associated reset; these are
> handled by using -1 as the index for the reset.
>
> Reviewed-by: Andrew Jeffery <andrew@...id.au>
> Signed-off-by: Joel Stanley <joel@....id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@...nel.crashing.org>
> ---
> v7:
> - Use mdelay instead of msleep and remove the todo. Stephen points out:
> > No you can't sleep here. It needs to delay because this is inside
> > spinlock_irqsave.
> v5:
> - Add Andrew's Reviewed-by
> v4:
> - Drop useless 'disable clock' comment
> - Drop CLK_IS_BASIC flag
> - Fix 'there are a number of clocks...' comment
> - Pass device to clk registration functions
> - Check for errors when registering clk_hws
> v3:
> - Remove gates offset as gates are now at the start of the list
>
> mdelay
>
> Signed-off-by: Joel Stanley <joel@....id.au>
> ---
> drivers/clk/clk-aspeed.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 130 insertions(+)
>
> diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
> index cf5ea63feb31..dbd3c7774831 100644
> --- a/drivers/clk/clk-aspeed.c
> +++ b/drivers/clk/clk-aspeed.c
> @@ -204,6 +204,106 @@ static const struct aspeed_clk_soc_data ast2400_data = {
> .calc_pll = aspeed_ast2400_calc_pll,
> };
>
> +static int aspeed_clk_enable(struct clk_hw *hw)
> +{
> + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
> + unsigned long flags;
> + u32 clk = BIT(gate->clock_idx);
> + u32 rst = BIT(gate->reset_idx);
> +
> + spin_lock_irqsave(gate->lock, flags);
> +
> + if (gate->reset_idx >= 0) {
> + /* Put IP in reset */
> + regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
> +
> + /* Delay 100us */
> + udelay(100);
> + }
> +
> + /* Enable clock */
> + regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, 0);
> +
> + if (gate->reset_idx >= 0) {
> + /* A delay of 10ms is specified by the ASPEED docs */
> + mdelay(10);
> +
> + /* Take IP out of reset */
> + regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0);
> + }
> +
> + spin_unlock_irqrestore(gate->lock, flags);
> +
> + return 0;
> +}
> +
> +static void aspeed_clk_disable(struct clk_hw *hw)
> +{
> + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
> + unsigned long flags;
> + u32 clk = BIT(gate->clock_idx);
> +
> + spin_lock_irqsave(gate->lock, flags);
> +
> + regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, clk);
> +
> + spin_unlock_irqrestore(gate->lock, flags);
> +}
> +
> +static int aspeed_clk_is_enabled(struct clk_hw *hw)
> +{
> + struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
> + u32 clk = BIT(gate->clock_idx);
> + u32 reg;
> +
> + regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®);
> +
> + return (reg & clk) ? 0 : 1;
> +}
> +
> +static const struct clk_ops aspeed_clk_gate_ops = {
> + .enable = aspeed_clk_enable,
> + .disable = aspeed_clk_disable,
> + .is_enabled = aspeed_clk_is_enabled,
> +};
> +
> +static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
> + const char *name, const char *parent_name, unsigned long flags,
> + struct regmap *map, u8 clock_idx, u8 reset_idx,
> + u8 clk_gate_flags, spinlock_t *lock)
> +{
> + struct aspeed_clk_gate *gate;
> + struct clk_init_data init;
> + struct clk_hw *hw;
> + int ret;
> +
> + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> + if (!gate)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = &aspeed_clk_gate_ops;
> + init.flags = flags;
> + init.parent_names = parent_name ? &parent_name : NULL;
> + init.num_parents = parent_name ? 1 : 0;
> +
> + gate->map = map;
> + gate->clock_idx = clock_idx;
> + gate->reset_idx = reset_idx;
> + gate->flags = clk_gate_flags;
> + gate->lock = lock;
> + gate->hw.init = &init;
> +
> + hw = &gate->hw;
> + ret = clk_hw_register(dev, hw);
> + if (ret) {
> + kfree(gate);
> + hw = ERR_PTR(ret);
> + }
> +
> + return hw;
> +}
> +
> static int aspeed_clk_probe(struct platform_device *pdev)
> {
> const struct aspeed_clk_soc_data *soc_data;
> @@ -211,6 +311,7 @@ static int aspeed_clk_probe(struct platform_device *pdev)
> struct regmap *map;
> struct clk_hw *hw;
> u32 val, rate;
> + int i;
>
> map = syscon_node_to_regmap(dev->of_node);
> if (IS_ERR(map)) {
> @@ -283,6 +384,35 @@ static int aspeed_clk_probe(struct platform_device *pdev)
> return PTR_ERR(hw);
> aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw;
>
> + /*
> + * TODO: There are a number of clocks that not included in this driver
> + * as more information is required:
> + * D2-PLL
> + * D-PLL
> + * YCLK
> + * RGMII
> + * RMII
> + * UART[1..5] clock source mux
> + * Video Engine (ECLK) mux and clock divider
> + */
> +
> + for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
> + const struct aspeed_gate_data *gd = &aspeed_gates[i];
> +
> + hw = aspeed_clk_hw_register_gate(dev,
> + gd->name,
> + gd->parent_name,
> + gd->flags,
> + map,
> + gd->clock_idx,
> + gd->reset_idx,
> + CLK_GATE_SET_TO_DISABLE,
> + &aspeed_clk_lock);
> + if (IS_ERR(hw))
> + return PTR_ERR(hw);
> + aspeed_clk_data->hws[i] = hw;
> + }
> +
> return 0;
> };
>
Powered by blists - more mailing lists