| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMYSmme2LgUSXevao5o0KeM-CztaVa+n6_3M2KSMumbxhcVZ0w@mail.gmail.com>
Date: Tue, 2 Jan 2018 21:46:51 +0000
From: Nigel Kettlewell <nigel.kettlewell@...glemail.com>
To: Hans Verkuil <hverkuil@...all.nl>
Cc: Devin Heitmueller <dheitmueller@...nellabs.com>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] Support HVR-1200 analog video as a clone of HVR-1500.
Tested, composite and s-video inputs.
To be honest we should probably just drop this, I no longer have the
card in my machine so cannot re-test it if ever needed.
On 4 December 2017 at 12:01, Hans Verkuil <hverkuil@...all.nl> wrote:
> Hi Nigel,
>
> Can you repost this as a proper patch? It doesn't apply (issues with tabs and
> whitespace: please use tabs!), and I am missing a "Signed-off-by" line (see
> https://elinux.org/Developer_Certificate_Of_Origin).
>
> Thanks!
>
> Hans
>
> On 09/19/2017 09:16 PM, Nigel Kettlewell wrote:
>> [adding kernel mailing lists missed from my reply]
>>
>> Thank you, yes I think I cribbed too much from the 1500. I think the
>> tuner part is not necessary: I have no analog over-the-air signal so I
>> cannot test it, hence I have removed the tuner element from the patch
>> (below).
>>
>> I have tested DVB-T which works fine. dmesg shows no errors (attached).
>>
>> DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
>> --dvb-adapter=0 --programs=8373
>> <works>
>>
>> /usr/local/bin/v4l2-ctl --set-input 1
>> /usr/local/bin/v4l2-ctl -s 0x000000f7
>> cat /dev/video0 > /tmp/svideo.raw
>> <ctrl-c>
>> ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
>> /tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
>> <svideo.mpg plays>
>>
>> Revised patch:
>>
>> ---
>> drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
>> 1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>> b/drivers/media/pci/cx23885/cx23885-cards.c
>> index 0350f13..1b685f0 100644
>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>> @@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>> .name = "Hauppauge WinTV-HVR1200",
>> + .porta = CX23885_ANALOG_VIDEO,
>> .portc = CX23885_MPEG_DVB,
>> + .input = {{
>> + .type = CX23885_VMUX_COMPOSITE1,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN6_CH1,
>> + .gpio0 = 0,
>> + }, {
>> + .type = CX23885_VMUX_SVIDEO,
>> + .vmux = CX25840_VIN7_CH3 |
>> + CX25840_VIN4_CH2 |
>> + CX25840_VIN8_CH1 |
>> + CX25840_SVIDEO_ON,
>> + .gpio0 = 0,
>> + } },
>> },
>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>> .name = "Hauppauge WinTV-HVR1700",
>> @@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>> case CX23885_BOARD_MPX885:
>> case CX23885_BOARD_MYGICA_X8507:
>> --
>> 2.9.4
>>
>>> Nigel Kettlewell <mailto:nigel.kettlewell@...glemail.com>
>>> 19 September 2017 12:49
>>> Thank you, yes I think I cribbed too much from the 1500. I think the
>>> tuner part is not necessary: I have no analog over-the-air signal so I
>>> cannot test it, hence I have removed the tuner element from the patch
>>> (below).
>>>
>>> I have tested DVB-T which works fine. dmesg shows no errors (attached).
>>>
>>> DISPLAY=xxx:0.0 vlc dvb-t://frequency=498000000:bandwidth=8
>>> --dvb-adapter=0 --programs=8373
>>> <works>
>>>
>>> /usr/local/bin/v4l2-ctl --set-input 1
>>> /usr/local/bin/v4l2-ctl -s 0x000000f7
>>> cat /dev/video0 > /tmp/svideo.raw
>>> <ctrl-c>
>>> ffmpeg -f rawvideo -pix_fmt yuyv422 -r 25 -s:v 720x576 -i
>>> /tmp/svideo.raw -vcodec mpeg2video -vb 2000k -y /tmp/svideo.mpg
>>> <svideo.mpg plays>
>>>
>>> Revised patch:
>>>
>>> ---
>>> drivers/media/pci/cx23885/cx23885-cards.c | 16 ++++++++++++++++
>>> 1 file changed, 16 insertions(+)
>>>
>>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>>> b/drivers/media/pci/cx23885/cx23885-cards.c
>>> index 0350f13..1b685f0 100644
>>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>>> @@ -196,7 +196,22 @@ struct cx23885_board cx23885_boards[] = {
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>>> .name = "Hauppauge WinTV-HVR1200",
>>> + .porta = CX23885_ANALOG_VIDEO,
>>> .portc = CX23885_MPEG_DVB,
>>> + .input = {{
>>> + .type = CX23885_VMUX_COMPOSITE1,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN6_CH1,
>>> + .gpio0 = 0,
>>> + }, {
>>> + .type = CX23885_VMUX_SVIDEO,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN8_CH1 |
>>> + CX25840_SVIDEO_ON,
>>> + .gpio0 = 0,
>>> + } },
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>>> .name = "Hauppauge WinTV-HVR1700",
>>> @@ -2260,6 +2275,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>>> case CX23885_BOARD_MPX885:
>>> case CX23885_BOARD_MYGICA_X8507:
>>> --
>>> 2.9.4
>>>
>>>
>>>
>>> Devin Heitmueller <mailto:dheitmueller@...nellabs.com>
>>> 18 September 2017 13:57
>>> On Sun, Sep 17, 2017 at 5:42 PM, Nigel Kettlewell
>>>
>>> I'm not confident the tuner config for this board is correct. The
>>> HVR-1200 is much closer to the HVR-1250 as opposed to the HVR-1500,
>>> and IIRC it didn't have an xc3028.
>>>
>>> I don't dispute that with the patch in question the composite/s-video
>>> are probably working ok, but I wouldn't recommend accepting this patch
>>> as-is until the tuner is verified for DVB-T and analog (ideally both).
>>>
>>> Can you provide the output of dmesg on device load? If it's filled
>>> with a bunch of errors showing xc3028 firmware load failures, that
>>> would be a smoking gun that it doesn't have the xc3028.
>>>
>>> Devin
>>>
>>> Nigel Kettlewell <mailto:nigel.kettlewell@...glemail.com>
>>> 17 September 2017 22:42
>>> I propose the following patch to support Hauppauge HVR-1200 analog
>>> video, nothing more than a clone of HVR-1500. Patch based on Linux 4.9
>>> commit 69973b830859bc6529a7a0468ba0d80ee5117826
>>>
>>> I have tested composite and S-Video inputs.
>>>
>>> With the change, HVR-1200 devices have a /dev/video<n> entry which is
>>> accessible in the normal way.
>>>
>>> Let me know if you need anything more.
>>>
>>> Nigel Kettlewell
>>>
>>>
>>>
>>> ---
>>> drivers/media/pci/cx23885/cx23885-cards.c | 24 ++++++++++++++++++++++++
>>> 1 file changed, 24 insertions(+)
>>>
>>> diff --git a/drivers/media/pci/cx23885/cx23885-cards.c
>>> b/drivers/media/pci/cx23885/cx23885-cards.c
>>> index 99ba8d6..5be38f1 100644
>>> --- a/drivers/media/pci/cx23885/cx23885-cards.c
>>> +++ b/drivers/media/pci/cx23885/cx23885-cards.c
>>> @@ -195,7 +195,30 @@ struct cx23885_board cx23885_boards[] = {
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1200] = {
>>> .name = "Hauppauge WinTV-HVR1200",
>>> + .porta = CX23885_ANALOG_VIDEO,
>>> .portc = CX23885_MPEG_DVB,
>>> + .tuner_type = TUNER_XC2028,
>>> + .tuner_addr = 0x61, /* 0xc2 >> 1 */
>>> + .input = {{
>>> + .type = CX23885_VMUX_TELEVISION,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN5_CH2 |
>>> + CX25840_VIN2_CH1,
>>> + .gpio0 = 0,
>>> + }, {
>>> + .type = CX23885_VMUX_COMPOSITE1,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN6_CH1,
>>> + .gpio0 = 0,
>>> + }, {
>>> + .type = CX23885_VMUX_SVIDEO,
>>> + .vmux = CX25840_VIN7_CH3 |
>>> + CX25840_VIN4_CH2 |
>>> + CX25840_VIN8_CH1 |
>>> + CX25840_SVIDEO_ON,
>>> + .gpio0 = 0,
>>> + } },
>>> },
>>> [CX23885_BOARD_HAUPPAUGE_HVR1700] = {
>>> .name = "Hauppauge WinTV-HVR1700",
>>> @@ -2262,6 +2285,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
>>> case CX23885_BOARD_HAUPPAUGE_HVR1290:
>>> case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
>>> case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
>>> + case CX23885_BOARD_HAUPPAUGE_HVR1200:
>>> case CX23885_BOARD_HAUPPAUGE_HVR1500:
>>> case CX23885_BOARD_MPX885:
>>> case CX23885_BOARD_MYGICA_X8507:
>>> --
>>> 2.9.4
>>>
>>
>
Powered by blists - more mailing lists