[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <f58ac367-9b22-a7dc-7d45-7e9d19e179c0@molgen.mpg.de>
Date: Wed, 3 Jan 2018 17:20:29 +0100
From: Paul Menzel <pmenzel+linux-wireless@...gen.mpg.de>
To: Johannes Berg <johannes@...solutions.net>
Cc: linux-wireless@...r.kernel.org, linux-kernel@...r.kernel.org,
it+linux-wireless@...gen.mpg.de,
Mario Limonciello <mario.limonciello@...l.com>,
Thorsten Leemhuis <linux@...mhuis.info>
Subject: UBSAN: Undefined behaviour in net/wireless/nl80211.c:718:4:
-1665903437 * 100 cannot be represented in type 'int'
Dear Linux folks,
I enabled the undefined behavior sanitizer, and built Linus’ master
branch under Ubuntu 16.04 with gcc (Ubuntu 5.4.0-6ubuntu1~16.04.5) 5.4.0
20160609.
```
$ grep UBSAN /boot/config-4.15.0-rc6+
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
CONFIG_UBSAN=y
CONFIG_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
```
Starting the system Dell XPS 13 9360 the messages below are printed.
```
$ git describe --tags
4.15-rc6
$ git log --oneline -1
30a7acd Linux 4.15-rc6
$ dmesg
[…]
[ 12.861199] ath10k_pci 0000:3a:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2
[ 12.861215] ath10k_pci 0000:3a:00.0: Direct firmware load for
ath10k/cal-pci-0000:3a:00.0.bin failed with error -2
[ 12.889785] ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000
chip_id 0x00340aff sub 1a56:1535
[ 12.889787] ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1
tracing 1 dfs 0 testmode 0
[ 12.890736] ath10k_pci 0000:3a:00.0: firmware ver
WLAN.RM.4.4-00022-QCARMSWPZ-2 api 6 features wowlan,ignore-otp crc32
4d458559
[ 12.956579] ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A
crc32 6fc88fe7
[ 13.526010] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[ 13.526564] ath10k_pci 0000:3a:00.0: htt-ver 3.32 wmi-op 4 htt-op 3
cal otp max-sta 32 raw 0 hwcrypto 1
[ 13.610154] ath: EEPROM regdomain: 0x6c
[ 13.610155] ath: EEPROM indicates we should expect a direct regpair map
[ 13.610156] ath: Country alpha2 being used: 00
[ 13.610157] ath: Regpair used: 0x6c
[ 13.615581] ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
[ 13.646881] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 14.379528] ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
[ 14.437330] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 14.499142] IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
[ 14.735926] Bluetooth: RFCOMM TTY layer initialized
[ 14.735932] Bluetooth: RFCOMM socket layer initialized
[ 14.735936] Bluetooth: RFCOMM ver 1.11
[ 14.798449] dell_smbios: No dell-smbios drivers are loaded
[ 14.798453] dell_smbios: No dell-smbios drivers are loaded
[ 14.798454] dell_smbios: No dell-smbios drivers are loaded
[ 14.992246] dell_smbios: No dell-smbios drivers are loaded
[ 14.992251] dell_smbios: No dell-smbios drivers are loaded
[ 14.992253] dell_smbios: No dell-smbios drivers are loaded
[ 22.098621] dell_smbios: No dell-smbios drivers are loaded
[ 22.098626] dell_smbios: No dell-smbios drivers are loaded
[ 22.098628] dell_smbios: No dell-smbios drivers are loaded
[ 24.180874] wlp58s0: authenticate with 6c:f3:7f:10:ae:18
[ 24.226177] wlp58s0: send auth to 6c:f3:7f:10:ae:18 (try 1/3)
[ 24.228204] wlp58s0: authenticated
[ 24.232029] wlp58s0: associate with 6c:f3:7f:10:ae:18 (try 1/3)
[ 24.235150] wlp58s0: RX AssocResp from 6c:f3:7f:10:ae:18 (capab=0x411
status=0 aid=1)
[ 24.237366] wlp58s0: associated
[ 29.242550] IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
[ 54.426485]
================================================================================
[ 54.426491] UBSAN: Undefined behaviour in net/wireless/nl80211.c:718:4
[ 54.426492] signed integer overflow:
[ 54.426493] -1665903437 * 100 cannot be represented in type 'int'
[ 54.426496] CPU: 2 PID: 423 Comm: kworker/2:2 Not tainted 4.15.0-rc6+ #36
[ 54.426497] Hardware name: Dell Inc. XPS 13 9360/0839Y6, BIOS 2.4.2
11/21/2017
[ 54.426516] Workqueue: events reg_todo [cfg80211]
[ 54.426517] Call Trace:
[ 54.426524] dump_stack+0x70/0xb2
[ 54.426526] ubsan_epilogue+0x9/0x40
[ 54.426528] handle_overflow+0xce/0xf0
[ 54.426531] ? __nla_put+0xc/0x20
[ 54.426532] ? nla_put+0x59/0xe0
[ 54.426541] nl80211_msg_put_channel+0x304/0x320 [cfg80211]
[ 54.426551] nl80211_send_beacon_hint_event+0x13a/0x2c0 [cfg80211]
[ 54.426560] handle_reg_beacon+0x135/0x250 [cfg80211]
[ 54.426562] ? dequeue_entity+0x123/0x790
[ 54.426564] ? __switch_to+0x12b/0x7d0
[ 54.426572] reg_todo+0x257/0x500 [cfg80211]
[ 54.426575] process_one_work+0x267/0x840
[ 54.426577] worker_thread+0x70/0x620
[ 54.426578] ? process_one_work+0x840/0x840
[ 54.426580] kthread+0x158/0x230
[ 54.426581] ? kthread_associate_blkcg+0x160/0x160
[ 54.426583] ? do_group_exit+0x45/0x130
[ 54.426585] ret_from_fork+0x1f/0x30
[ 54.426586]
================================================================================
[ 110.966580] acpi INT3400:00: Unsupported event [0x86]
[ 119.866923] dell_smbios: No dell-smbios drivers are loaded
[ 119.866930] dell_smbios: No dell-smbios drivers are loaded
[ 119.866932] dell_smbios: No dell-smbios drivers are loaded
[ 119.866937] dell_smbios: No dell-smbios drivers are loaded
[ 119.866939] dell_smbios: No dell-smbios drivers are loaded
[ 119.866941] dell_smbios: No dell-smbios drivers are loaded
[ 120.767721] dell_smbios: No dell-smbios drivers are loaded
[ 120.767729] dell_smbios: No dell-smbios drivers are loaded
[ 120.767731] dell_smbios: No dell-smbios drivers are loaded
[ 120.767736] dell_smbios: No dell-smbios drivers are loaded
[ 120.767738] dell_smbios: No dell-smbios drivers are loaded
[ 120.767740] dell_smbios: No dell-smbios drivers are loaded
[ 121.075387] dell_smbios: No dell-smbios drivers are loaded
[ 121.075394] dell_smbios: No dell-smbios drivers are loaded
[ 121.075396] dell_smbios: No dell-smbios drivers are loaded
[ 121.075401] dell_smbios: No dell-smbios drivers are loaded
[ 121.075403] dell_smbios: No dell-smbios drivers are loaded
[ 121.075405] dell_smbios: No dell-smbios drivers are loaded
```
Please tell me, if I can provide more information.
Kind regards,
Paul
View attachment "config-4.15.0-rc3+" of type "text/plain" (212468 bytes)
Download attachment "smime.p7s" of type "application/pkcs7-signature" (5174 bytes)
Powered by blists - more mailing lists