linux-kernel - [PATCH 4.9 33/39] kaiser: kaiser_flush_tlb_on_return_to

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180103195105.476006079@linuxfoundation.org>
Date:   Wed,  3 Jan 2018 21:11:47 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Hugh Dickins <hughd@...gle.com>,
        Jiri Kosina <jkosina@...e.cz>
Subject: [PATCH 4.9 33/39] kaiser: kaiser_flush_tlb_on_return_to_user() check PCID

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@...gle.com>


Let kaiser_flush_tlb_on_return_to_user() do the X86_FEATURE_PCID
check, instead of each caller doing it inline first: nobody needs
to optimize for the noPCID case, it's clearer this way, and better
suits later changes.  Replace those no-op X86_CR3_PCID_KERN_FLUSH lines
by a BUILD_BUG_ON() in load_new_mm_cr3(), in case something changes.

Signed-off-by: Hugh Dickins <hughd@...gle.com>
Acked-by: Jiri Kosina <jkosina@...e.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 arch/x86/include/asm/tlbflush.h |    4 ++--
 arch/x86/mm/kaiser.c            |    6 +++---
 arch/x86/mm/tlb.c               |    8 ++++----
 3 files changed, 9 insertions(+), 9 deletions(-)

--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -158,7 +158,7 @@ static inline void __native_flush_tlb(vo
 	 * back:
 	 */
 	preempt_disable();
-	if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID))
+	if (kaiser_enabled)
 		kaiser_flush_tlb_on_return_to_user();
 	native_write_cr3(native_read_cr3());
 	preempt_enable();
@@ -217,7 +217,7 @@ static inline void __native_flush_tlb_si
 	 */
 
 	if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) {
-		if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID))
+		if (kaiser_enabled)
 			kaiser_flush_tlb_on_return_to_user();
 		asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
 		return;
--- a/arch/x86/mm/kaiser.c
+++ b/arch/x86/mm/kaiser.c
@@ -435,12 +435,12 @@ void kaiser_setup_pcid(void)
 
 /*
  * Make a note that this cpu will need to flush USER tlb on return to user.
- * Caller checks whether this_cpu_has(X86_FEATURE_PCID) before calling:
- * if cpu does not, then the NOFLUSH bit will never have been set.
+ * If cpu does not have PCID, then the NOFLUSH bit will never have been set.
  */
 void kaiser_flush_tlb_on_return_to_user(void)
 {
-	this_cpu_write(x86_cr3_pcid_user,
+	if (this_cpu_has(X86_FEATURE_PCID))
+		this_cpu_write(x86_cr3_pcid_user,
 			X86_CR3_PCID_USER_FLUSH | KAISER_SHADOW_PGD_OFFSET);
 }
 EXPORT_SYMBOL(kaiser_flush_tlb_on_return_to_user);
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -39,7 +39,7 @@ static void load_new_mm_cr3(pgd_t *pgdir
 {
 	unsigned long new_mm_cr3 = __pa(pgdir);
 
-	if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID)) {
+	if (kaiser_enabled) {
 		/*
 		 * We reuse the same PCID for different tasks, so we must
 		 * flush all the entries for the PCID out when we change tasks.
@@ -50,10 +50,10 @@ static void load_new_mm_cr3(pgd_t *pgdir
 		 * do it here, but can only be used if X86_FEATURE_INVPCID is
 		 * available - and many machines support pcid without invpcid.
 		 *
-		 * The line below is a no-op: X86_CR3_PCID_KERN_FLUSH is now 0;
-		 * but keep that line in there in case something changes.
+		 * If X86_CR3_PCID_KERN_FLUSH actually added something, then it
+		 * would be needed in the write_cr3() below - if PCIDs enabled.
 		 */
-		new_mm_cr3 |= X86_CR3_PCID_KERN_FLUSH;
+		BUILD_BUG_ON(X86_CR3_PCID_KERN_FLUSH);
 		kaiser_flush_tlb_on_return_to_user();
 	}