linux-kernel - Re: [PATCH 2/6] ARM64: dts: meson-axg: uart: fix address space range

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1515148207.5048.24.camel@baylibre.com>
Date:   Fri, 05 Jan 2018 11:30:07 +0100
From:   Jerome Brunet <jbrunet@...libre.com>
To:     Yixun Lan <yixun.lan@...ogic.com>,
        Kevin Hilman <khilman@...libre.com>, devicetree@...r.kernel.org
Cc:     Neil Armstrong <narmstrong@...libre.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Carlo Caione <carlo@...one.org>,
        linux-amlogic@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/6] ARM64: dts: meson-axg: uart: fix address space range

On Fri, 2018-01-05 at 17:56 +0800, Yixun Lan wrote:
> The address space range is actually 0x18, fixed here.

Isn't it the same for other meson SoC ? If they are compatible, it should.
Could you please re-submit this change addressing all the required platforms ?

> 
> Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index 1c6002b3fe34..9636a7c5f6ed 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -143,14 +143,14 @@
>  
>  			uart_A: serial@...00 {
>  				compatible = "amlogic,meson-gx-uart";
> -				reg = <0x0 0x24000 0x0 0x14>;
> +				reg = <0x0 0x24000 0x0 0x18>;
>  				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
>  				status = "disabled";
>  			};
>  
>  			uart_B: serial@...00 {
>  				compatible = "amlogic,meson-gx-uart";
> -				reg = <0x0 0x23000 0x0 0x14>;
> +				reg = <0x0 0x23000 0x0 0x18>;
>  				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
>  				status = "disabled";
>  			};