linux-kernel - Re: [PATCH 06/12] IB/core: Add optional PCI P2P flag to rdma_rw_ctx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180108183434.GA15549@lst.de>
Date:   Mon, 8 Jan 2018 19:34:34 +0100
From:   Christoph Hellwig <hch@....de>
To:     Jason Gunthorpe <jgg@...pe.ca>
Cc:     Christoph Hellwig <hch@....de>,
        Logan Gunthorpe <logang@...tatee.com>,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        linux-nvme@...ts.infradead.org, linux-rdma@...r.kernel.org,
        linux-nvdimm@...ts.01.org, linux-block@...r.kernel.org,
        Stephen Bates <sbates@...thlin.com>,
        Jens Axboe <axboe@...nel.dk>,
        Keith Busch <keith.busch@...el.com>,
        Sagi Grimberg <sagi@...mberg.me>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Max Gurtovoy <maxg@...lanox.com>,
        Dan Williams <dan.j.williams@...el.com>,
        Jérôme Glisse <jglisse@...hat.com>,
        Benjamin Herrenschmidt <benh@...nel.crashing.org>
Subject: Re: [PATCH 06/12] IB/core: Add optional PCI P2P flag to
        rdma_rw_ctx_[init|destroy]()

On Mon, Jan 08, 2018 at 11:09:17AM -0700, Jason Gunthorpe wrote:
> > As usual we implement what actually has a consumer.  On top of that the
> > R/W API is the only core RDMA API that actually does DMA mapping for the
> > ULP at the moment.
> 
> Well again the same can be said for dma_map_page vs dma_map_sg...

I don't understand this comment.

> 
> > For SENDs and everything else dma maps are done by the ULP (I'd like
> > to eventually change that, though - e.g. sends through that are
> > inline to the workqueue don't need a dma map to start with).
> 
> 
> > That's because the initial design was to let the ULPs do the DMA
> > mappings, which fundamentally is wrong.  I've fixed it for the R/W
> > API when adding it, but no one has started work on SENDs and atomics.
> 
> Well, you know why it is like this, and it is very complicated to
> unwind - the HW driver does not have enough information during CQ
> processing to properly do any unmaps, let alone serious error tear
> down unmaps, so we'd need a bunch of new APIs developed first, like RW
> did. :\

Yes, if it was trivial we would have done it already.

> > > And on that topic, does this scheme work with HFI?
> > 
> > No, and I guess we need an opt-out.  HFI generally seems to be
> > extremely weird.
> 
> This series needs some kind of fix so HFI, QIB, rxe, etc don't get
> broken, and it shouldn't be 'fixed' at the RDMA level.

I don't think rxe is a problem as it won't show up a pci device.
HFI and QIB do show as PCI devices, and could be used for P2P transfers
from the PCI point of view.  It's just that they have a layer of
software indirection between their hardware and what is exposed at
the RDMA layer.

So I very much disagree about where to place that workaround - the
RDMA code is exactly the right place.

> > > This is why P2P must fit in to the common DMA framework somehow, we
> > > rely on these abstractions to work properly and fully in RDMA.
> > 
> > Moving P2P up to common RDMA code isn't going to fix this.  For that
> > we need to stop preting that something that isn't DMA can abuse the
> > dma mapping framework, and until then opt them out of behavior that
> > assumes actual DMA like P2P.
> 
> It could, if we had a DMA op for p2p then the drivers that provide
> their own ops can implement it appropriately or not at all.
> 
> Eg the correct implementation for rxe to support p2p memory is
> probably somewhat straightfoward.

But P2P is _not_ a factor of the dma_ops implementation at all,
it is something that happens behind the dma_map implementation.

Think about what the dma mapping routines do:

 (a) translate from host address to bus addresses

and

 (b) flush caches (in non-coherent architectures)

Both are obviously not needed for P2P transfers, as they never reach
the host.

> Very long term the IOMMUs under the ops will need to care about this,
> so the wrapper is not an optimal place to put it - but I wouldn't
> object if it gets it out of RDMA :)

Unless you have an IOMMU on your PCIe switch and not before/inside
the root complex that is not correct.