| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6b454804-e910-e8e8-6d2b-5bc25c7a4d4c@codeaurora.org>
Date: Tue, 9 Jan 2018 16:13:08 +0530
From: Archit Taneja <architt@...eaurora.org>
To: Jernej Skrabec <jernej.skrabec@...l.net>,
maxime.ripard@...e-electrons.com, airlied@...ux.ie,
robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
a.hajda@...sung.com, Laurent.pinchart@...asonboard.com
Cc: mturquette@...libre.com, sboyd@...eaurora.org,
Jose.Abreu@...opsys.com, narmstrong@...libre.com,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH 04/11] drm/bridge/synopsys: dw-hdmi: Export some PHY
related functions
On 12/31/2017 02:31 AM, Jernej Skrabec wrote:
> Parts of PHY code could be useful also for custom PHYs. For example,
> Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
> with few additional memory mapped registers, so most of the Synopsys PHY
> related code could be reused.
>
> It turns out that even completely custom HDMI PHYs, such as the one
> found in Allwinner H3, can reuse some of those functions. This would
> suggest that (some?) functions exported in this commit are actually part
> of generic PHY interface and not really specific to Synopsys PHYs.
>
> Export useful PHY functions.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 45 ++++++++++++++++++++++---------
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 2 ++
> include/drm/bridge/dw_hdmi.h | 10 +++++++
> 3 files changed, 44 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 7ca14d7325b5..67467d0b683a 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -1037,19 +1037,21 @@ static void dw_hdmi_phy_enable_svsret(struct dw_hdmi *hdmi, u8 enable)
> HDMI_PHY_CONF0_SVSRET_MASK);
> }
>
> -static void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
> {
> hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
> HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
> HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
>
> -static void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
> {
> hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
> HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
> HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
>
> static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
> {
> @@ -1065,6 +1067,23 @@ static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable)
> HDMI_PHY_CONF0_SELDIPIF_MASK);
> }
>
> +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi, u8 enable)
> +{
> + hdmi_mask_writeb(hdmi, enable, HDMI_MC_PHYRSTZ,
> + HDMI_MC_PHYRSTZ_PHYRSTZ_OFFSET,
> + HDMI_MC_PHYRSTZ_PHYRSTZ_MASK);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_reset);
> +
> +void dw_hdmi_phy_set_slave_addr(struct dw_hdmi *hdmi)
> +{
> + hdmi_phy_test_clear(hdmi, 1);
> + hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> + HDMI_PHY_I2CM_SLAVE_ADDR);
> + hdmi_phy_test_clear(hdmi, 0);
> +}
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_set_slave_addr);
Should this be called dw_hdmi_phy_gen2_set_slave_addr?
Looks good otherwise. Same for patches 3 and 4 in this series.
Thanks,
Archit
> +
> static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
> {
> const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
> @@ -1204,15 +1223,12 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
> dw_hdmi_phy_enable_svsret(hdmi, 1);
>
> /* PHY reset. The reset signal is active high on Gen2 PHYs. */
> - hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
> - hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
> + dw_hdmi_phy_gen2_reset(hdmi, 1);
> + dw_hdmi_phy_gen2_reset(hdmi, 0);
>
> hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
>
> - hdmi_phy_test_clear(hdmi, 1);
> - hdmi_writeb(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2,
> - HDMI_PHY_I2CM_SLAVE_ADDR);
> - hdmi_phy_test_clear(hdmi, 0);
> + dw_hdmi_phy_set_slave_addr(hdmi);
>
> /* Write to the PHY as configured by the platform */
> if (pdata->configure_phy)
> @@ -1251,15 +1267,16 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
> dw_hdmi_phy_power_off(hdmi);
> }
>
> -static enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> - void *data)
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> + void *data)
> {
> return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
> connector_status_connected : connector_status_disconnected;
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
>
> -static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> - bool force, bool disabled, bool rxsense)
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> + bool force, bool disabled, bool rxsense)
> {
> u8 old_mask = hdmi->phy_mask;
>
> @@ -1271,8 +1288,9 @@ static void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> if (old_mask != hdmi->phy_mask)
> hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
>
> -static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> {
> /*
> * Configure the PHY RX SENSE and HPD interrupts polarities and clear
> @@ -1291,6 +1309,7 @@ static void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
> hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
> HDMI_IH_MUTE_PHY_STAT0);
> }
> +EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
>
> static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
> .init = dw_hdmi_phy_init,
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> index 9d90eb9c46e5..fd150430d0b3 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> @@ -950,6 +950,8 @@ enum {
>
> /* MC_PHYRSTZ field values */
> HDMI_MC_PHYRSTZ_PHYRSTZ = 0x01,
> + HDMI_MC_PHYRSTZ_PHYRSTZ_OFFSET = 0x00,
> + HDMI_MC_PHYRSTZ_PHYRSTZ_MASK = 0x01,
>
> /* MC_HEACPHY_RST field values */
> HDMI_MC_HEACPHY_RST_ASSERT = 0x1,
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 182f83283e24..f5cca4362154 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -159,5 +159,15 @@ void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
> /* PHY configuration */
> void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
> unsigned char addr);
> +enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
> + void *data);
> +void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
> + bool force, bool disabled, bool rxsense);
> +void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
> +
> +void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_gen2_reset(struct dw_hdmi *hdmi, u8 enable);
> +void dw_hdmi_phy_set_slave_addr(struct dw_hdmi *hdmi);
>
> #endif /* __IMX_HDMI_H__ */
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists