linux-kernel - [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 11 Jan 2018 17:31:07 -0800
From:   Florian Fainelli <f.fainelli@...il.com>
To:     bcm-kernel-feedback-list@...adcom.com
Cc:     Florian Fainelli <f.fainelli@...il.com>, Tejun Heo <tj@...nel.org>,
        Kishon Vijay Abraham I <kishon@...com>,
        Heiko Stuebner <heiko@...ech.de>,
        Srinath Mannam <srinath.mannam@...adcom.com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        Dan Carpenter <dan.carpenter@...cle.com>,
        linux-ide@...r.kernel.org (open list:LIBATA SUBSYSTEM (Serial and
        Parallel ATA drivers)), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2 1/2] phy: brcm-sata: Implement calibrate callback

Implement the calibration callback to allow turning on the Clock-Data
Recovery module clamping when necessary, e.g: during failure to identify
a SATA hard drive from ahci_brcm.c::brcm_ahci_read_id.

Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 drivers/phy/broadcom/phy-brcm-sata.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index 3f953db70288..8000ce312d95 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -150,6 +150,9 @@ enum sata_phy_regs {
 	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
 	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
 	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
+
+	RXPMD_REG_BANK				= 0x1c0,
+	RXPMD_RX_FREQ_MON_CONTROL1		= 0x87,
 };
 
 enum sata_phy_ctrl_regs {
@@ -505,8 +508,37 @@ static int brcm_sata_phy_init(struct phy *phy)
 	return rc;
 }
 
+static void brcm_stb_sata_calibrate(struct brcm_sata_port *port)
+{
+	void __iomem *base = brcm_sata_pcb_base(port);
+	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 tmp = BIT(8);
+
+	brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
+			 ~tmp, tmp);
+}
+
+static int brcm_sata_phy_calibrate(struct phy *phy)
+{
+	struct brcm_sata_port *port = phy_get_drvdata(phy);
+	int rc = -EOPNOTSUPP;
+
+	switch (port->phy_priv->version) {
+	case BRCM_SATA_PHY_STB_28NM:
+	case BRCM_SATA_PHY_STB_40NM:
+		brcm_stb_sata_calibrate(port);
+		rc = 0;
+		break;
+	default:
+		break;
+	};
+
+	return rc;
+}
+
 static const struct phy_ops phy_ops = {
 	.init		= brcm_sata_phy_init,
+	.calibrate	= brcm_sata_phy_calibrate,
 	.owner		= THIS_MODULE,
 };
 
-- 
2.7.4