linux-kernel - Re: [PATCH] iio: adc: aspeed: Fix error handling path

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20180114110319.3bffcb4d@archlinux>
Date:   Sun, 14 Jan 2018 11:03:19 +0000
From:   Jonathan Cameron <jic23@...nel.org>
To:     Christophe JAILLET <christophe.jaillet@...adoo.fr>
Cc:     knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
        raltherr@...gle.com, joel@....id.au, arvind.yadav.cs@...il.com,
        mykolak@...lanox.com, linux-iio@...r.kernel.org,
        linux-kernel@...r.kernel.org, kernel-janitors@...r.kernel.org
Subject: Re: [PATCH] iio: adc: aspeed: Fix error handling path

On Mon,  8 Jan 2018 07:47:36 +0100
Christophe JAILLET <christophe.jaillet@...adoo.fr> wrote:

> The labels and branching order of the error path of 'aspeed_adc_probe()'
> are broken.
> Re-order the labels and goto statements.
> 
> Signed-off-by: Christophe JAILLET <christophe.jaillet@...adoo.fr>

Applied to the fixes-togreg-post-rc1 branch of iio.git.

The patch doesn't apply that far back so I'm going to assume
you are right and that it was a merge conflict that went wrong.

Anyhow, will go in sometime after rc1.

Thanks,

Jonathan

> ---
> Not sure where it comes from.
> Merge conflict incorrectly fixed?
> ---
>  drivers/iio/adc/aspeed_adc.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index 327a49ba1991..9515ca165dfd 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -243,7 +243,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  					 ASPEED_ADC_INIT_POLLING_TIME,
>  					 ASPEED_ADC_INIT_TIMEOUT);
>  		if (ret)
> -			goto scaler_error;
> +			goto poll_timeout_error;
>  	}
>  
>  	/* Start all channels in normal mode. */
> @@ -274,9 +274,10 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  	writel(ASPEED_OPERATION_MODE_POWER_DOWN,
>  		data->base + ASPEED_REG_ENGINE_CONTROL);
>  	clk_disable_unprepare(data->clk_scaler->clk);
> -reset_error:
> -	reset_control_assert(data->rst);
>  clk_enable_error:
> +poll_timeout_error:
> +	reset_control_assert(data->rst);
> +reset_error:
>  	clk_hw_unregister_divider(data->clk_scaler);
>  scaler_error:
>  	clk_hw_unregister_divider(data->clk_prescaler);