[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1516105859-3525-9-git-send-email-patrice.chotard@st.com>
Date: Tue, 16 Jan 2018 13:30:52 +0100
From: <patrice.chotard@...com>
To: Russell King <linux@...linux.org.uk>,
Ulf Hansson <ulf.hansson@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Alexandre Torgue <alexandre.torgue@...com>
CC: <linux-mmc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-clk@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
Andrea Merello <andrea.merello@...il.com>,
Patrice Chotard <patrice.chotard@...com>
Subject: [PATCH v2 08/15] ARM: dts: stm32: Add pin map for SDIO controller on stm32f4
From: Andrea Merello <andrea.merello@...il.com>
This patch adds the pin configuration for SDIO controller on
stm32f4.
Signed-off-by: Andrea Merello <andrea.merello@...il.com>
Signed-off-by: Patrice Chotard <patrice.chotard@...com>
---
v2 _ none
arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index ae94d86..3520289 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -338,6 +338,37 @@
slew-rate = <3>;
};
};
+
+ sdio_pins: sdio_pins@0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDIO_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ sdio_pins_od: sdio_pins_od@0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDIO_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDIO_D3 */
+ <STM32_PINMUX('C', 12, AF12)>; /* SDIO_CK */
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDIO_CMD */
+ drive-open-drain;
+ slew-rate = <2>;
+ };
+ };
};
};
};
--
1.9.1
Powered by blists - more mailing lists