Message-ID: <b5af18eb-e54d-eeab-d03b-4c0edbe74fd6@axentia.se>
Date:   Tue, 16 Jan 2018 14:56:52 +0100
From:   Peter Rosin <peda@...ntia.se>
To:     Boris Brezillon <boris.brezillon@...e-electrons.com>,
        Richard Weinberger <richard@....at>
Cc:     Rafał Miłecki <rafal@...ecki.pl>,
        Brian Norris <computersforpeace@...il.com>,
        David Woodhouse <dwmw2@...radead.org>,
        Marek Vasut <marek.vasut@...il.com>,
        Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
        linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [REGRESSION] linux-next panics when trying to mount root

On 2018-01-16 14:36, Boris Brezillon wrote:
> Hi Peter,
> 
> On Tue, 16 Jan 2018 14:28:38 +0100
> Peter Rosin <peda@...ntia.se> wrote:
> 
>> Hi!
>>
>> When trying next-20180116 I get the following panic during boot:
>>
>> Linux version 4.15.0-rc8-next-20180116 (peda@orc) (gcc version 4.9.2 20140811 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.08 - Linaro GCC 4.9-2014.08)) #208 Tue Jan 16 14:23:44 CET 2018
>> CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>> OF: fdt: Machine model: Axentia Linea-Nattis v2 Natte v2
>> Memory policy: Data cache writeback
>> CPU: All CPU(s) started in SVC mode.
>> random: fast init done
>> Built 1 zonelists, mobility grouping on.  Total pages: 16256
>> Kernel command line: console=ttyS0,115200 rw consoleblank=0 ip=none root=ubi0:rootfs ubi.mtd=6 rootfstype=ubifs noinitrd mtdparts=atmel_nand:256k(at91bootstrap),384k(barebox)ro,256k@...k(bareboxenv),256k(bareboxenv2),128k@...6k(oftree),5M@2M(kernel),-@8M(rootfs)
>> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
>> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
>> Memory: 56244K/65536K available (5120K kernel code, 183K rwdata, 1064K rodata, 1024K init, 108K bss, 9292K reserved, 0K cma-reserved)
>> Virtual kernel memory layout:
>>     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
>>     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
>>     vmalloc : 0xc4800000 - 0xff800000   ( 944 MB)
>>     lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
>>       .text : 0x(ptrval) - 0x(ptrval)   (6112 kB)
>>       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
>>       .data : 0x(ptrval) - 0x(ptrval)   ( 184 kB)
>>        .bss : 0x(ptrval) - 0x(ptrval)   ( 109 kB)
>> NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
>> clocksource: pit: mask: 0xfffffff max_cycles: 0xfffffff, max_idle_ns: 14479245754 ns
>> sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
>> Console: colour dummy device 80x30
>> Calibrating delay loop... 351.43 BogoMIPS (lpj=1757184)
>> pid_max: default: 32768 minimum: 301
>> Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
>> CPU: Testing write buffer coherency: ok
>> Setting up static identity map for 0x20100000 - 0x20100060
>> devtmpfs: initialized
>> VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
>> clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>> futex hash table entries: 256 (order: -1, 3072 bytes)
>> pinctrl core: initialized pinctrl subsystem
>> NET: Registered protocol family 16
>> DMA: preallocated 256 KiB pool for atomic coherent allocations
>> AT91: PM: standby: standby, suspend: ulp0
>> No ATAGs?
>> gpio-at91 fffff200.gpio: at address 45a5b6d3
>> gpio-at91 fffff400.gpio: at address d0c9dba6
>> gpio-at91 fffff600.gpio: at address fb737fc9
>> gpio-at91 fffff800.gpio: at address c5aa2ee6
>> gpio-at91 fffffa00.gpio: at address 4663f5ca
>> pinctrl-at91 ahb:apb:pinctrl@...ff200: initialized AT91 pinctrl driver
>> clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 115833966437 ns
>> at_hdmac ffffe600.dma-controller: Atmel AHB DMA Controller ( cpy set slave ), 8 channels
>> at_hdmac ffffe800.dma-controller: Atmel AHB DMA Controller ( cpy set slave ), 8 channels
>> AT91: Detected SoC family: sama5d3
>> AT91: Detected SoC: sama5d31, revision 2
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> at91_i2c f0014000.i2c: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
>> at91_i2c f0014000.i2c: AT91 i2c bus driver (hw version: 0x402).
>> clocksource: Switched to clocksource tcb_clksrc
>> NET: Registered protocol family 2
>> tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
>> TCP established hash table entries: 1024 (order: 0, 4096 bytes)
>> TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
>> TCP: Hash tables configured (established 1024 bind 1024)
>> UDP hash table entries: 256 (order: 0, 4096 bytes)
>> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
>> NET: Registered protocol family 1
>> Initialise system trusted keyrings
>> workingset: timestamp_bits=30 max_order=14 bucket_order=0
>> Key type asymmetric registered
>> Asymmetric key parser 'x509' registered
>> io scheduler noop registered (default)
>> io scheduler mq-deadline registered
>> io scheduler kyber registered
>> f001c000.serial: ttyS1 at MMIO 0xf001c000 (irq = 22, base_baud = 4125000) is a ATMEL_SERIAL
>> ffffee00.serial: ttyS0 at MMIO 0xffffee00 (irq = 30, base_baud = 8250000) is a ATMEL_SERIAL
>> console [ttyS0] enabled
>> loop: module loaded
>> ssc f0008000.ssc: Atmel SSC device at 0x6a12493c (irq 19)
>> ssc f0008000.ssc: failed to auto-setup ssc for audio
>> at24 0-0051: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
>> at24 0-0050: 256 byte 24c02 EEPROM, writable, 16 bytes/write
>> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> [drm] No driver support for vblank timestamp query.
>> atmel-hlcdc-display-controller atmel-hlcdc-dc: failed to create HLCDC outputs: -517
>> atmel-hlcdc-display-controller atmel-hlcdc-dc: failed to initialize mode setting
>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> ehci-atmel: EHCI Atmel driver
>> atmel_usba_udc 500000.gadget: MMIO registers at 0xf8030000 mapped at ff1022ba
>> atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at 3b2532b1
>> g_serial gadget: Gadget Serial v2.4
>> g_serial gadget: g_serial ready
>> at91_rtc fffffeb0.rtc: registered as rtc0
>> at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
>> i2c /dev entries driver
>> AT91: Starting after wakeup
>> atmel_mci f0000000.mmc: version: 0x505
>> atmel_mci f0000000.mmc: using dma0chan2 for DMA transfers
>> atmel_mci f0000000.mmc: Atmel MCI controller at 0xf0000000 irq 18, 1 slots
>> atmel_aes f8038000.aes: version: 0x135
>> atmel_aes f8038000.aes: Atmel AES - Using dma1chan0, dma1chan1 for DMA transfers
>> atmel_sha f8034000.sha: version: 0x410
>> atmel_sha f8034000.sha: using dma1chan2 for DMA transfers
>> atmel_sha f8034000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
>> atmel_tdes f803c000.tdes: version: 0x701
>> atmel_tdes f803c000.tdes: using dma1chan3, dma1chan4 for DMA transfers
>> atmel_tdes f803c000.tdes: Atmel DES/TDES
>> usbcore: registered new interface driver usbhid
>> usbhid: USB HID core driver
>> nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xac
>> nand: Micron MT29F4G08ABBDAHC
>> nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
>> Bad block table found at page 262080, version 0x01
>> Bad block table found at page 262016, version 0x01
>> 6 ofpart partitions found on MTD device atmel_nand
>> Creating 6 MTD partitions on "atmel_nand":
>> 0x000000000000-0x000000040000 : "at91bootstrap"
>> 0x000000040000-0x0000000c0000 : "bootloader"
>> 0x0000000c0000-0x000000180000 : "bootloader env"
>> 0x000000180000-0x000000200000 : "device tree"
>> 0x000000200000-0x000000800000 : "kernel"
>> 0x000000800000-0x000010000000 : "rootfs"
>> NET: Registered protocol family 10
>> Segment Routing with IPv6
>> sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>> NET: Registered protocol family 17
>> Loading compiled-in X.509 certificates
>> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>> [drm] No driver support for vblank timestamp query.
>> atmel-hlcdc-display-controller atmel-hlcdc-dc: fb0:  frame buffer device
>> [drm] Initialized atmel-hlcdc 1.0.0 20141504 for atmel-hlcdc-dc on minor 0
>> UBI error: cannot open mtd 6, error -19
>> input: gpio-keys as /devices/platform/gpio-keys/input/input0
>> at91_rtc fffffeb0.rtc: setting system clock to 2007-01-01 00:00:08 UTC (1167609608)
>> panel-VCC: disabling
>> panel-VDD: disabling
>> atmel_usart ffffee00.serial: using dma1chan5 for rx DMA transfers
>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
>> CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc8-next-20180116 #208
>> Hardware name: Atmel SAMA5
>> [<c010cc5c>] (unwind_backtrace) from [<c010b140>] (show_stack+0x10/0x14)
>> [<c010b140>] (show_stack) from [<c0115f20>] (panic+0xc8/0x254)
>> [<c0115f20>] (panic) from [<c0801348>] (mount_block_root+0x23c/0x2f8)
>> [<c0801348>] (mount_block_root) from [<c0801528>] (prepare_namespace+0xa8/0x19c)
>> [<c0801528>] (prepare_namespace) from [<c0800ff0>] (kernel_init_freeable+0x1bc/0x1cc)
>> [<c0800ff0>] (kernel_init_freeable) from [<c051b958>] (kernel_init+0x8/0x10c)
>> [<c051b958>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
>> Exception stack(0xc3821fb0 to 0xc3821ff8)
>> 1fa0:                                     00000000 00000000 00000000 00000000
>> 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
>> ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
>>
>>
>> I bisected it to:
>>
>> 4ac9222778478a00c7fc9d347b7ed1e0e595120d is the first bad commit
>> commit 4ac9222778478a00c7fc9d347b7ed1e0e595120d
>> Author: Rafał Miłecki <rafal@...ecki.pl>
>> Date:   Thu Jan 4 08:05:34 2018 +0100
>>
>>     mtd: ofpart: add of_match_table with "fixed-partitions"
>>
>>     This allows using this parser with any flash driver that takes care of
>>     setting of_node (using mtd_set_of_node helper) correctly. Up to now
>>     support for "fixed-partitions" DT compatibility string was working only
>>     with flash drivers that were specifying "ofpart" (manually or by letting
>>     mtd use the default set of parsers).
>>
>>     This matches existing bindings documentation.
>>
>>     Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
>>     Reviewed-by: Brian Norris <computersforpeace@...il.com>
>>     Tested-by: Brian Norris <computersforpeace@...il.com>
>>     Signed-off-by: Boris Brezillon <boris.brezillon@...e-electrons.com>
>>
>>
>> Reverting that patch on top of next-20180116 fixes the problem.
> 
> Can you paste the boot logs after reverting this commit?

The relevant snippet is this:

nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xac
nand: Micron MT29F4G08ABBDAHC
nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
7 cmdlinepart partitions found on MTD device atmel_nand
Creating 7 MTD partitions on "atmel_nand":
0x000000000000-0x000000040000 : "at91bootstrap"
0x000000040000-0x0000000a0000 : "barebox"
0x0000000c0000-0x000000100000 : "bareboxenv"
0x000000100000-0x000000140000 : "bareboxenv2"
0x000000180000-0x0000001a0000 : "oftree"
0x000000200000-0x000000700000 : "kernel"
0x000000800000-0x000020000000 : "rootfs"
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
atmel-hlcdc-display-controller atmel-hlcdc-dc: fb0:  frame buffer device
[drm] Initialized atmel-hlcdc 1.0.0 20141504 for atmel-hlcdc-dc on minor 0
ubi0: attaching mtd6


And the problem seems to be that command line arguments no longer
override the device tree with respect to the mtd partitions, and
that the nattis device tree has a problem with a missing second
barebox environment putting the rootfs in mtd5 instead of the
expected mtd6. Or perhaps the root cause is that the partitions
from the device tree didn't previously matter?

And yep, I can confirm that using this in the device tree, which
replicates the command line args, also fixes things.

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		at91bootstrap@0 {
			label = "at91bootstrap";
			reg = <0x0 0x40000>;
		};

		bootloader@...00 {
			label = "bootloader";
			reg = <0x40000 0x60000>;
		};

		bareboxenv@...00 {
			label = "bareboxenv";
			reg = <0xc0000 0x40000>;
		};

		bareboxenv2@...000 {
			label = "bareboxenv2";
			reg = <0x100000 0x40000>;
		};

		oftree@...000 {
			label = "oftree";
			reg = <0x180000 0x20000>;
		};

		kernel@...000 {
			label = "kernel";
			reg = <0x200000 0x500000>;
		};

		rootfs@...000 {
			label = "rootfs";
			reg = <0x800000 0x0f800000>;
		};
	};

Hmmm, I guess the question is if the command line should override the
device tree or not? I'm going to send a patch for the above dts change
either way...

Cheers,
Peter

Powered by blists - more mailing lists