[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180117201421.25954-3-jernej.skrabec@siol.net>
Date: Wed, 17 Jan 2018 21:14:11 +0100
From: Jernej Skrabec <jernej.skrabec@...l.net>
To: maxime.ripard@...e-electrons.com, airlied@...ux.ie,
robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
architt@...eaurora.org, a.hajda@...sung.com,
Laurent.pinchart@...asonboard.com
Cc: mturquette@...libre.com, sboyd@...eaurora.org,
Jose.Abreu@...opsys.com, narmstrong@...libre.com,
jernej.skrabec@...l.net, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [PATCH v3 02/12] clk: sunxi-ng: Change formula for NKMP PLLs
This commit changes formula from this:
Freq = (parent_freq * N * K) / (M * P)
to this:
Freq = (parent_freq / M) * N * K / P
This improves situation when N is in the range 1-255. PLL parent clock
is almost always 24 MHz, which means that for N >= 180 original formula
overflows and result becomes useless. Situation can be improved if M is
used as predivider as it can be seen in the second formula. That way at
least M > 1 is considered, but it still leaves small gap for wrong result
when M = 1 and N >= 180.
Using M as predivider shouldn't cause any issue, because it is in range
1-4 at most, so there is no or only minimal rounding error.
Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
drivers/clk/sunxi-ng/ccu_nkmp.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index a99068a08315..e6c996ad4483 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -33,7 +33,7 @@ static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
for (_p = nkmp->min_p; _p <= nkmp->max_p; _p <<= 1) {
unsigned long tmp_rate;
- tmp_rate = parent * _n * _k / (_m * _p);
+ tmp_rate = (parent / _m) * _n * _k / _p;
if (tmp_rate > rate)
continue;
@@ -107,7 +107,7 @@ static unsigned long ccu_nkmp_recalc_rate(struct clk_hw *hw,
p = reg >> nkmp->p.shift;
p &= (1 << nkmp->p.width) - 1;
- return (parent_rate * n * k >> p) / m;
+ return (parent_rate / m) * n * k >> p;
}
static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -127,7 +127,7 @@ static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
ccu_nkmp_find_best(*parent_rate, rate, &_nkmp);
- return *parent_rate * _nkmp.n * _nkmp.k / (_nkmp.m * _nkmp.p);
+ return (*parent_rate / _nkmp.m) * _nkmp.n * _nkmp.k / _nkmp.p;
}
static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
--
2.15.1
Powered by blists - more mailing lists