lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 17 Jan 2018 16:27:11 +0100
From:   Peter Rosin <peda@...ntia.se>
To:     Andrew Jeffery <andrew@...id.au>, linux-kernel@...r.kernel.org
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        Charles Keepax <ckeepax@...nsource.cirrus.com>,
        linux-gpio@...r.kernel.org
Subject: Re: [PATCH 3/3] pinctrl: sx150x: add a static gpio/pinctrl pin range
 mapping

On 2018-01-17 16:05, Andrew Jeffery wrote:
> On Wed, 2018-01-17 at 14:34 +0100, Peter Rosin wrote:
>> Without such a range, gpiolib fails with -EPROBE_DEFER, pending the
>> addition of the range. So, without a range, gpiolib will keep
>> deferring indefinitely.
>>
>> Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep")
> 
> This is a bit of a nit-pick, but I'd argue the hazard always existed in
> the pinctrl-sx150x's probe however hadn't been triggered until now. My
> instinct is Fixes should instead point to 9e80f9064e73 ("pinctrl: Add
> SX150X GPIO Extender Pinctrl Driver"). Having said that I still think
> it's worth pointing out in the commit message that e10f72bf4b3e ("gpio:
> gpiolib: Generalise state persistence beyond sleep") is the motivation
> for your patch (i.e. mention both commits).

Linus, if you agree, just change the commit message as you see fit. Can't
say I'm proud of any of it...

Cheers,
Peter

> Regardless, thanks to you both for getting to the bottom of this.
> 
> Andrew
> 
>> Suggested-by: Linus Walleij <linus.walleij@...aro.org>
>> Signed-off-by: Peter Rosin <peda@...ntia.se>
>> ---
>>  drivers/pinctrl/pinctrl-sx150x.c | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/pinctrl/pinctrl-sx150x.c b/drivers/pinctrl/pinctrl-sx150x.c
>> index 049dd15e04ef..cbf58a10113d 100644
>> --- a/drivers/pinctrl/pinctrl-sx150x.c
>> +++ b/drivers/pinctrl/pinctrl-sx150x.c
>> @@ -1193,6 +1193,11 @@ static int sx150x_probe(struct i2c_client *client,
>>  	if (ret)
>>  		return ret;
>>  
>> +	ret = gpiochip_add_pin_range(&pctl->gpio, dev_name(dev),
>> +				     0, 0, pctl->data->npins);
>> +	if (ret)
>> +		return ret;
>> +
>>  	/* Add Interrupt support if an irq is specified */
>>  	if (client->irq > 0) {
>>  		pctl->irq_chip.name = devm_kstrdup(dev, client->name,

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ