| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180118115251.5542-6-jeffy.chen@rock-chips.com>
Date: Thu, 18 Jan 2018 19:52:43 +0800
From: Jeffy Chen <jeffy.chen@...k-chips.com>
To: linux-kernel@...r.kernel.org
Cc: jcliang@...omium.org, robin.murphy@....com, xxm@...k-chips.com,
tfiga@...omium.org, Jeffy Chen <jeffy.chen@...k-chips.com>,
Heiko Stuebner <heiko@...ech.de>,
linux-rockchip@...ts.infradead.org,
iommu@...ts.linux-foundation.org, Joerg Roedel <joro@...tes.org>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v4 05/13] iommu/rockchip: Use iopoll helpers to wait for hardware
From: Tomasz Figa <tfiga@...omium.org>
This patch converts the rockchip-iommu driver to use the in-kernel
iopoll helpers to wait for certain status bits to change in registers
instead of an open-coded custom macro.
Signed-off-by: Tomasz Figa <tfiga@...omium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@...k-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/iommu/rockchip-iommu.c | 68 ++++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 36 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 37065a7127c9..4a1c710408af 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -13,7 +13,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iommu.h>
-#include <linux/jiffies.h>
+#include <linux/iopoll.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -36,7 +36,8 @@
#define RK_MMU_AUTO_GATING 0x24
#define DTE_ADDR_DUMMY 0xCAFEBABE
-#define FORCE_RESET_TIMEOUT 100 /* ms */
+#define FORCE_RESET_TIMEOUT 100000 /* us */
+#define POLL_TIMEOUT 1000 /* us */
/* RK_MMU_STATUS fields */
#define RK_MMU_STATUS_PAGING_ENABLED BIT(0)
@@ -73,8 +74,6 @@
*/
#define RK_IOMMU_PGSIZE_BITMAP 0x007ff000
-#define IOMMU_REG_POLL_COUNT_FAST 1000
-
struct rk_iommu_domain {
struct list_head iommus;
struct platform_device *pdev;
@@ -109,27 +108,6 @@ static struct rk_iommu_domain *to_rk_domain(struct iommu_domain *dom)
return container_of(dom, struct rk_iommu_domain, domain);
}
-/**
- * Inspired by _wait_for in intel_drv.h
- * This is NOT safe for use in interrupt context.
- *
- * Note that it's important that we check the condition again after having
- * timed out, since the timeout could be due to preemption or similar and
- * we've never had a chance to check the condition before the timeout.
- */
-#define rk_wait_for(COND, MS) ({ \
- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
- int ret__ = 0; \
- while (!(COND)) { \
- if (time_after(jiffies, timeout__)) { \
- ret__ = (COND) ? 0 : -ETIMEDOUT; \
- break; \
- } \
- usleep_range(50, 100); \
- } \
- ret__; \
-})
-
/*
* The Rockchip rk3288 iommu uses a 2-level page table.
* The first level is the "Directory Table" (DT).
@@ -333,9 +311,21 @@ static bool rk_iommu_is_paging_enabled(struct rk_iommu *iommu)
return enable;
}
+static bool rk_iommu_is_reset_done(struct rk_iommu *iommu)
+{
+ bool done = true;
+ int i;
+
+ for (i = 0; i < iommu->num_mmu; i++)
+ done &= rk_iommu_read(iommu->bases[i], RK_MMU_DTE_ADDR) == 0;
+
+ return done;
+}
+
static int rk_iommu_enable_stall(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (rk_iommu_is_stall_active(iommu))
return 0;
@@ -346,7 +336,8 @@ static int rk_iommu_enable_stall(struct rk_iommu *iommu)
rk_iommu_command(iommu, RK_MMU_CMD_ENABLE_STALL);
- ret = rk_wait_for(rk_iommu_is_stall_active(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_stall_active, iommu, val,
+ val, 100, POLL_TIMEOUT);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Enable stall request timed out, status: %#08x\n",
@@ -358,13 +349,15 @@ static int rk_iommu_enable_stall(struct rk_iommu *iommu)
static int rk_iommu_disable_stall(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (!rk_iommu_is_stall_active(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_DISABLE_STALL);
- ret = rk_wait_for(!rk_iommu_is_stall_active(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_stall_active, iommu, val,
+ !val, 100, POLL_TIMEOUT);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Disable stall request timed out, status: %#08x\n",
@@ -376,13 +369,15 @@ static int rk_iommu_disable_stall(struct rk_iommu *iommu)
static int rk_iommu_enable_paging(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (rk_iommu_is_paging_enabled(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_ENABLE_PAGING);
- ret = rk_wait_for(rk_iommu_is_paging_enabled(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_paging_enabled, iommu, val,
+ val, 100, POLL_TIMEOUT);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Enable paging request timed out, status: %#08x\n",
@@ -394,13 +389,15 @@ static int rk_iommu_enable_paging(struct rk_iommu *iommu)
static int rk_iommu_disable_paging(struct rk_iommu *iommu)
{
int ret, i;
+ bool val;
if (!rk_iommu_is_paging_enabled(iommu))
return 0;
rk_iommu_command(iommu, RK_MMU_CMD_DISABLE_PAGING);
- ret = rk_wait_for(!rk_iommu_is_paging_enabled(iommu), 1);
+ ret = readx_poll_timeout(rk_iommu_is_paging_enabled, iommu, val,
+ !val, 100, POLL_TIMEOUT);
if (ret)
for (i = 0; i < iommu->num_mmu; i++)
dev_err(iommu->dev, "Disable paging request timed out, status: %#08x\n",
@@ -413,6 +410,7 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
{
int ret, i;
u32 dte_addr;
+ bool val;
if (iommu->reset_disabled)
return 0;
@@ -433,13 +431,11 @@ static int rk_iommu_force_reset(struct rk_iommu *iommu)
rk_iommu_command(iommu, RK_MMU_CMD_FORCE_RESET);
- for (i = 0; i < iommu->num_mmu; i++) {
- ret = rk_wait_for(rk_iommu_read(iommu->bases[i], RK_MMU_DTE_ADDR) == 0x00000000,
- FORCE_RESET_TIMEOUT);
- if (ret) {
- dev_err(iommu->dev, "FORCE_RESET command timed out\n");
- return ret;
- }
+ ret = readx_poll_timeout(rk_iommu_is_reset_done, iommu, val,
+ val, 100, FORCE_RESET_TIMEOUT);
+ if (ret) {
+ dev_err(iommu->dev, "FORCE_RESET command timed out\n");
+ return ret;
}
return 0;
--
2.11.0
Powered by blists - more mailing lists