linux-kernel - [PATCH v3 10/14] ARM: dts: stm32: Enable SDIO controller on stm32429i-eval board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1516286070-24927-11-git-send-email-patrice.chotard@st.com>
Date:   Thu, 18 Jan 2018 15:34:26 +0100
From:   <patrice.chotard@...com>
To:     Russell King <linux@...linux.org.uk>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...eaurora.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Alexandre Torgue <alexandre.torgue@...com>
CC:     <linux-mmc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-gpio@...r.kernel.org>, <devicetree@...r.kernel.org>,
        Patrice Chotard <patrice.chotard@...com>
Subject: [PATCH v3 10/14] ARM: dts: stm32: Enable SDIO controller on stm32429i-eval board

From: Patrice Chotard <patrice.chotard@...com>

This patch adds SDIO related DT nodes for stm32429i-eval board.

Signed-off-by: Patrice Chotard <patrice.chotard@...com>
---

v3: _ none

v2: _ none


 arch/arm/boot/dts/stm32429i-eval.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 1e3d4c6..6a5c701 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -144,6 +144,13 @@
 			};
 		};
 	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &adc {
@@ -254,6 +261,18 @@
 	status = "okay";
 };
 
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+	max-frequency = <12500000>;
+};
+
 &timers1 {
 	status = "okay";
 
-- 
1.9.1