| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180118150951.28964-1-prarit@redhat.com>
Date: Thu, 18 Jan 2018 10:09:51 -0500
From: Prarit Bhargava <prarit@...hat.com>
To: linux-kernel@...r.kernel.org
Cc: Prarit Bhargava <prarit@...hat.com>, linux-acpi@...r.kernel.org,
linux-doc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-pm@...r.kernel.org, linux-serial@...r.kernel.org,
Bhupesh Sharma <bhsharma@...hat.com>,
Lv Zheng <lv.zheng@...el.com>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>, x86@...nel.org,
Jonathan Corbet <corbet@....net>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Timur Tabi <timur@...eaurora.org>, graeme.gregory@...aro.org,
mark.salter@...hat.com
Subject: [PATCH] acpi, spcr: Make SPCR available to x86
Note on testing: I've tested this on several ARM64 and x86 boxes (only
earlycon, console=ttyS0,115200, and with both options), verified that
functionality on ARM64 has not changed (ie, CONFIG_ACPI_SPCR_TABLE is
always =y), and verified functionality when !CONFIG_ACPI_SPCR_TABLE on
x86.
P.
----8<----
SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup an
early console.
General fixes include updating Documentation & Kconfig (for x86), updating
comments, and changing parse_spcr() to acpi_parse_spcr(), and
earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be more
descriptive.
On x86, many systems have a valid SPCR table but the table version is not
2 so the table version check must be a warning.
On ARM64 when the kernel parameter earlycon is used both the early console
and console are enabled. On x86, only the earlycon should be enabled by
by default. Modify acpi_parse_spcr() to allow options for initializing
the early console and console separately.
Signed-off-by: Prarit Bhargava <prarit@...hat.com>
Cc: linux-acpi@...r.kernel.org
Cc: linux-doc@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-pm@...r.kernel.org
Cc: linux-serial@...r.kernel.org
Cc: Bhupesh Sharma <bhsharma@...hat.com>
Cc: Lv Zheng <lv.zheng@...el.com>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Ingo Molnar <mingo@...hat.com>
Cc: "H. Peter Anvin" <hpa@...or.com>
Cc: x86@...nel.org
Cc: Jonathan Corbet <corbet@....net>
Cc: Catalin Marinas <catalin.marinas@....com>
Cc: Will Deacon <will.deacon@....com>
Cc: "Rafael J. Wysocki" Mrjw@...ysocki.net>
Cc: Timur Tabi <timur@...eaurora.org>
Cc: graeme.gregory@...aro.org
Cc: mark.salter@...hat.com
---
Documentation/admin-guide/kernel-parameters.txt | 9 +++++---
arch/arm64/kernel/acpi.c | 4 ++--
arch/x86/kernel/acpi/boot.c | 3 +++
drivers/acpi/Kconfig | 7 +++++-
drivers/acpi/spcr.c | 29 +++++++++++++------------
drivers/tty/serial/earlycon.c | 15 +++++--------
include/linux/acpi.h | 7 ++++--
include/linux/serial_core.h | 4 ++--
8 files changed, 44 insertions(+), 34 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 46b26bfee27b..6f519230ed34 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -915,9 +915,12 @@
earlycon= [KNL] Output early console device and options.
- When used with no options, the early console is
- determined by the stdout-path property in device
- tree's chosen node.
+ [ARM64] The early console is determined by the
+ stdout-path property in device tree's chosen node,
+ or determined by the ACPI SPCR table.
+
+ [X86] When used with no options the early console is
+ determined by the ACPI SPCR table.
cdns,<addr>[,options]
Start an early, polled-mode console on a Cadence
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index b3162715ed78..2aa5609def27 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -230,10 +230,10 @@ void __init acpi_boot_table_init(void)
done:
if (acpi_disabled) {
- if (earlycon_init_is_deferred)
+ if (earlycon_acpi_spcr_enable)
early_init_dt_scan_chosen_stdout();
} else {
- parse_spcr(earlycon_init_is_deferred);
+ acpi_parse_spcr(earlycon_acpi_spcr_enable, true);
if (IS_ENABLED(CONFIG_ACPI_BGRT))
acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
}
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index f4c463df8b08..0bf6a58f7a6d 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -36,6 +36,7 @@
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/efi-bgrt.h>
+#include <linux/serial_core.h>
#include <asm/e820/api.h>
#include <asm/irqdomain.h>
@@ -1626,6 +1627,8 @@ int __init acpi_boot_init(void)
if (!acpi_noirq)
x86_init.pci.init = pci_acpi_init;
+ /* Do not enable ACPI SPCR console by default */
+ acpi_parse_spcr(earlycon_acpi_spcr_enable, false);
return 0;
}
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 46505396869e..ddcb5f40e8ee 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -79,7 +79,12 @@ config ACPI_DEBUGGER_USER
endif
config ACPI_SPCR_TABLE
- bool
+ bool "ACPI Serial Port Console Redirection Support"
+ default y if X86
+ help
+ Enable support for Serial Port Console Redirection (SPCR) Table.
+ This table provides information about the configuration of the
+ earlycon console.
config ACPI_LPIT
bool
diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index 324b35bfe781..89e97d21a89c 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -21,7 +21,7 @@
* occasionally getting stuck as 1. To avoid the potential for a hang, check
* TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
* implementations, so only do so if an affected platform is detected in
- * parse_spcr().
+ * acpi_parse_spcr().
*/
bool qdf2400_e44_present;
EXPORT_SYMBOL(qdf2400_e44_present);
@@ -74,19 +74,21 @@ static bool xgene_8250_erratum_present(struct acpi_table_spcr *tb)
}
/**
- * parse_spcr() - parse ACPI SPCR table and add preferred console
+ * acpi_parse_spcr() - parse ACPI SPCR table and add preferred console
*
- * @earlycon: set up earlycon for the console specified by the table
+ * @enable_earlycon: set up earlycon for the console specified by the table
+ * @enable_console: setup the console specified by the table.
*
* For the architectures with support for ACPI, CONFIG_ACPI_SPCR_TABLE may be
* defined to parse ACPI SPCR table. As a result of the parsing preferred
- * console is registered and if @earlycon is true, earlycon is set up.
+ * console is registered and if @enable_earlycon is true, earlycon is set up.
+ * If @enable_console is true the system console is also configured.
*
* When CONFIG_ACPI_SPCR_TABLE is defined, this function should be called
* from arch initialization code as soon as the DT/ACPI decision is made.
*
*/
-int __init parse_spcr(bool earlycon)
+int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
{
static char opts[64];
struct acpi_table_spcr *table;
@@ -105,11 +107,8 @@ int __init parse_spcr(bool earlycon)
if (ACPI_FAILURE(status))
return -ENOENT;
- if (table->header.revision < 2) {
- err = -ENOENT;
- pr_err("wrong table version\n");
- goto done;
- }
+ if (table->header.revision < 2)
+ pr_info("SPCR table version %d\n", table->header.revision);
if (table->serial_port.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
switch (ACPI_ACCESS_BIT_WIDTH((
@@ -185,7 +184,7 @@ int __init parse_spcr(bool earlycon)
*/
if (qdf2400_erratum_44_present(&table->header)) {
qdf2400_e44_present = true;
- if (earlycon)
+ if (enable_earlycon)
uart = "qdf2400_e44";
}
@@ -205,11 +204,13 @@ int __init parse_spcr(bool earlycon)
pr_info("console: %s\n", opts);
- if (earlycon)
+ if (enable_earlycon)
setup_earlycon(opts);
- err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
-
+ if (enable_console)
+ err = add_preferred_console(uart, 0, opts + strlen(uart) + 1);
+ else
+ err = 0;
done:
acpi_put_table((struct acpi_table_header *)table);
return err;
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index 4c8b80f1c688..870e84fb6e39 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -197,25 +197,20 @@ int __init setup_earlycon(char *buf)
}
/*
- * When CONFIG_ACPI_SPCR_TABLE is defined, "earlycon" without parameters in
- * command line does not start DT earlycon immediately, instead it defers
- * starting it until DT/ACPI decision is made. At that time if ACPI is enabled
- * call parse_spcr(), else call early_init_dt_scan_chosen_stdout()
+ * This defers the initialization of the early console until after ACPI has
+ * been initialized.
*/
-bool earlycon_init_is_deferred __initdata;
+bool earlycon_acpi_spcr_enable __initdata;
/* early_param wrapper for setup_earlycon() */
static int __init param_setup_earlycon(char *buf)
{
int err;
- /*
- * Just 'earlycon' is a valid param for devicetree earlycons;
- * don't generate a warning from parse_early_params() in that case
- */
+ /* Just 'earlycon' is a valid param for devicetree and ACPI SPCR. */
if (!buf || !buf[0]) {
if (IS_ENABLED(CONFIG_ACPI_SPCR_TABLE)) {
- earlycon_init_is_deferred = true;
+ earlycon_acpi_spcr_enable = true;
return 0;
} else if (!buf) {
return early_init_dt_scan_chosen_stdout();
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index dc1ebfeeb5ec..9aac8f0ebe23 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1242,9 +1242,12 @@ static inline void acpi_table_upgrade(void) { }
#ifdef CONFIG_ACPI_SPCR_TABLE
extern bool qdf2400_e44_present;
-int parse_spcr(bool earlycon);
+int acpi_parse_spcr(bool enable_earlycon, bool enable_console);
#else
-static inline int parse_spcr(bool earlycon) { return 0; }
+static inline int acpi_parse_spcr(bool enable_earlycon, bool enable_console)
+{
+ return 0;
+}
#endif
#if IS_ENABLED(CONFIG_ACPI_GENERIC_GSI)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 37b044e78333..aefd0e5115da 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -376,10 +376,10 @@ extern int of_setup_earlycon(const struct earlycon_id *match,
const char *options);
#ifdef CONFIG_SERIAL_EARLYCON
-extern bool earlycon_init_is_deferred __initdata;
+extern bool earlycon_acpi_spcr_enable __initdata;
int setup_earlycon(char *buf);
#else
-static const bool earlycon_init_is_deferred;
+static const bool earlycon_acpi_spcr_enable;
static inline int setup_earlycon(char *buf) { return 0; }
#endif
--
1.8.3.1
Powered by blists - more mailing lists