| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHCN7xJ=Cpqhw6UHK=k8Mgr4E4aGaW29=tt+vAZUbOktAoW_Yg@mail.gmail.com>
Date: Sun, 21 Jan 2018 15:19:51 -0600
From: Adam Ford <aford173@...il.com>
To: David Lechner <david@...hnology.com>
Cc: linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sekhar Nori <nsekhar@...com>,
Kevin Hilman <khilman@...nel.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 00/41] ARM: davinci: convert to common clock framework
On Sat, Jan 20, 2018 at 11:13 AM, David Lechner <david@...hnology.com> wrote:
> This series converts mach-davinci to use the common clock framework.
>
> The series works like this, the first 19 patches create new clock drivers
> using the common clock framework. There are basically 3 groups of clocks -
> PLL, PSC and CFGCHIP (syscon). There are six different SoCs that each have
> unique init data, which is the reason for so many patches.
>
> Then, starting with "ARM: da830: add new clock init using common clock",
> we get the mach code ready for the switch by adding the code needed for
> the new clock drivers and adding #ifndef CONFIG_COMMON_CLK around the
> legacy clocks so that we can switch easily between the old and the new.
>
> "ARM: davinci: switch to common clock framework" actually flips the switch
> to start using the new clock drivers. Then the next 8 patches remove all
> of the old clock code.
>
> The final three patches add device tree clock support to the one SoC that
> supports it.
>
> v6 changes (also see individual patches for details):
> - All of the device tree bindings are changed
> - All of the clock drivers are changed significantly
> - Fixed issues brought up during review of v5
> - "ARM: davinci: move davinci_clk_init() to init_time" is removed from this
> series and submitted separately
>
> v5 changes:
> - Basically, this is an entirely new series
> - Patches are broken up into bite-sized pieces
> - Converted PSC clock driver to use regmap
> - Restored "force" flag for certain DA850 clocks
> - Added device tree bindings
> - Moved more of the clock init to drivers/clk
> - Fixed frequency scaling (maybe*)
>
> * I have frequency scaling using cpufreq-dt, so I know the clocks are doing
> what they need to do to make this work, but I haven't figured out how to
> test davinci-cpufreq driver yet. (Patches to make cpufreq-dt work will be
> sent separately after this series has landed.)
>
> Dependencies:
>
> This series applies on top of linux-davinci/master plus the following patches:
> - [1] "clk: fix reentrancy of clk_enable() on UP systems" (in clk-next)
> - [2] "clk: add helper functions for managing clk_onecell_data"
> - [3] "clk: divider: read-only divider can propagate rate change"
> - [4],[5],[6],[7],[8],[9] series "ARM: davinci: common clock prep work"
>
> You can find a working branch with everything included in the "common-clk-v6"
> branch of https://github.com/dlech/ev3dev-kernel.git.
>
> [1]: https://patchwork.kernel.org/patch/10145933/
> [2]: https://patchwork.kernel.org/patch/10145873/
> [3]: https://patchwork.kernel.org/patch/10146829/
> [4]: https://patchwork.kernel.org/patch/10176241/
> [5]: https://patchwork.kernel.org/patch/10176249/
> [6]: https://patchwork.kernel.org/patch/10176245/
> [7]: https://patchwork.kernel.org/patch/10176251/
> [8]: https://patchwork.kernel.org/patch/10176243/
> [9]: https://patchwork.kernel.org/patch/10176247/
>
>
> Testing/debugging for the uninitiated:
>
> I only have one device to test with, which is based on da850, so I will
> have to rely on others to do some testing here. Since we are dealing with
> clocks, if something isn't working, you most likely won't see output on
> the serial port. To figure out what is going on, you need to enable...
>
> CONFIG_DEBUG_LL=y
> CONFIG_EARLY_PRINTK=y
>
> and add "earlyprintk clk_ignore_unused" to the kernel command line options.
> You may need to select a different UART for this depending on your board. I
> think UART1 is the default in the kernel configuration.
>
> On da850 devices comment out the lines:
>
> else
> clk_set_parent(clk, parent->clk);
>
> in da850.c or, if using device tree, comment out the lines:
>
> assigned-clocks = <&async3_clk>;
> assigned-clock-parents = <&pll1_sysclk 2>;
>
> in da850.dtsi when doing earlyprintk, otherwise the UART1 and UART2 clock
> source will change during boot and cause garbled output after a point.
>
>
> David Lechner (41):
> dt-bindings: clock: Add new bindings for TI Davinci PLL clocks
> clk: davinci: New driver for davinci PLL clocks
> clk: davinci: Add platform information for TI DA830 PLL
> clk: davinci: Add platform information for TI DA850 PLL
> clk: davinci: Add platform information for TI DM355 PLL
> clk: davinci: Add platform information for TI DM365 PLL
> clk: davinci: Add platform information for TI DM644x PLL
> clk: davinci: Add platform information for TI DM646x PLL
> dt-bindings: clock: New bindings for TI Davinci PSC
> clk: davinci: New driver for davinci PSC clocks
> clk: davinci: Add platform information for TI DA830 PSC
> clk: davinci: Add platform information for TI DA850 PSC
> clk: davinci: Add platform information for TI DM355 PSC
> clk: davinci: Add platform information for TI DM365 PSC
> clk: davinci: Add platform information for TI DM644x PSC
> clk: davinci: Add platform information for TI DM646x PSC
> dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks
> clk: davinci: New driver for TI DA8XX CFGCHIP clocks
> clk: davinci: New driver for TI DA8XX USB PHY clocks
> ARM: da830: add new clock init using common clock framework
> ARM: da850: add new clock init using common clock framework
> ARM: dm355: add new clock init using common clock framework
> ARM: dm365: add new clock init using common clock framework
> ARM: dm644x: add new clock init using common clock framework
> ARM: dm646x: add new clock init using common clock framework
> ARM: da8xx: add new USB PHY clock init using common clock framework
> ARM: da8xx: add new sata_refclk init using common clock framework
> ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS
> ARM: davinci_all_defconfig: remove CONFIG_DAVINCI_RESET_CLOCKS
> ARM: davinci: switch to common clock framework
> ARM: da830: Remove legacy clock init
> ARM: da850: Remove legacy clock init
> ARM: dm355: Remove legacy clock init
> ARM: dm365: Remove legacy clock init
> ARM: dm644x: Remove legacy clock init
> ARM: dm646x: Remove legacy clock init
> ARM: da8xx: Remove legacy clock init
> ARM: davinci: remove legacy clocks
> ARM: davinci: add device tree support to timer
> ARM: da8xx-dt: switch to device tree clocks
> ARM: dts: da850: Add clocks
>
> .../bindings/clock/ti/davinci/da8xx-cfgchip.txt | 93 +++
> .../devicetree/bindings/clock/ti/davinci/pll.txt | 96 +++
> .../devicetree/bindings/clock/ti/davinci/psc.txt | 66 ++
> MAINTAINERS | 7 +
> arch/arm/Kconfig | 2 +-
> arch/arm/boot/dts/da850.dtsi | 162 ++++
> arch/arm/configs/davinci_all_defconfig | 1 -
> arch/arm/mach-davinci/Kconfig | 13 +-
> arch/arm/mach-davinci/Makefile | 4 +-
> arch/arm/mach-davinci/clock.c | 745 -------------------
> arch/arm/mach-davinci/clock.h | 76 --
> arch/arm/mach-davinci/common.c | 3 -
> arch/arm/mach-davinci/da830.c | 440 +----------
> arch/arm/mach-davinci/da850.c | 685 ++---------------
> arch/arm/mach-davinci/da8xx-dt.c | 61 +-
> arch/arm/mach-davinci/davinci.h | 4 +
> arch/arm/mach-davinci/devices-da8xx.c | 43 +-
> arch/arm/mach-davinci/devices.c | 1 -
> arch/arm/mach-davinci/dm355.c | 386 +---------
> arch/arm/mach-davinci/dm365.c | 472 +-----------
> arch/arm/mach-davinci/dm644x.c | 318 +-------
> arch/arm/mach-davinci/dm646x.c | 353 +--------
> arch/arm/mach-davinci/include/mach/clock.h | 3 -
> arch/arm/mach-davinci/include/mach/common.h | 8 -
> arch/arm/mach-davinci/psc.c | 137 ----
> arch/arm/mach-davinci/psc.h | 12 -
> arch/arm/mach-davinci/time.c | 19 +-
> arch/arm/mach-davinci/usb-da8xx.c | 256 ++-----
> drivers/clk/Makefile | 1 +
> drivers/clk/davinci/Makefile | 22 +
> drivers/clk/davinci/da8xx-cfgchip.c | 305 ++++++++
> drivers/clk/davinci/da8xx-usb-phy-clk.c | 312 ++++++++
> drivers/clk/davinci/pll-da830.c | 51 ++
> drivers/clk/davinci/pll-da850.c | 163 +++++
> drivers/clk/davinci/pll-dm355.c | 66 ++
> drivers/clk/davinci/pll-dm365.c | 110 +++
> drivers/clk/davinci/pll-dm644x.c | 67 ++
> drivers/clk/davinci/pll-dm646x.c | 63 ++
> drivers/clk/davinci/pll.c | 813 +++++++++++++++++++++
> drivers/clk/davinci/pll.h | 118 +++
> drivers/clk/davinci/psc-da830.c | 85 +++
> drivers/clk/davinci/psc-da850.c | 109 +++
> drivers/clk/davinci/psc-dm355.c | 74 ++
> drivers/clk/davinci/psc-dm365.c | 79 ++
> drivers/clk/davinci/psc-dm644x.c | 68 ++
> drivers/clk/davinci/psc-dm646x.c | 62 ++
> drivers/clk/davinci/psc.c | 298 ++++++++
> drivers/clk/davinci/psc.h | 88 +++
> include/linux/clk/davinci.h | 37 +
> 49 files changed, 3683 insertions(+), 3774 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt
> create mode 100644 Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
> create mode 100644 Documentation/devicetree/bindings/clock/ti/davinci/psc.txt
> delete mode 100644 arch/arm/mach-davinci/clock.c
> delete mode 100644 arch/arm/mach-davinci/psc.c
> create mode 100644 drivers/clk/davinci/Makefile
> create mode 100644 drivers/clk/davinci/da8xx-cfgchip.c
> create mode 100644 drivers/clk/davinci/da8xx-usb-phy-clk.c
> create mode 100644 drivers/clk/davinci/pll-da830.c
> create mode 100644 drivers/clk/davinci/pll-da850.c
> create mode 100644 drivers/clk/davinci/pll-dm355.c
> create mode 100644 drivers/clk/davinci/pll-dm365.c
> create mode 100644 drivers/clk/davinci/pll-dm644x.c
> create mode 100644 drivers/clk/davinci/pll-dm646x.c
> create mode 100644 drivers/clk/davinci/pll.c
> create mode 100644 drivers/clk/davinci/pll.h
> create mode 100644 drivers/clk/davinci/psc-da830.c
> create mode 100644 drivers/clk/davinci/psc-da850.c
> create mode 100644 drivers/clk/davinci/psc-dm355.c
> create mode 100644 drivers/clk/davinci/psc-dm365.c
> create mode 100644 drivers/clk/davinci/psc-dm644x.c
> create mode 100644 drivers/clk/davinci/psc-dm646x.c
> create mode 100644 drivers/clk/davinci/psc.c
> create mode 100644 drivers/clk/davinci/psc.h
> create mode 100644 include/linux/clk/davinci.h
>
I tested this tested on DA850-evm in both Device Tree mode and using
the board file. The reboot is broken without the watchdog module, but
the watchdog patch is in [PATCH] ARM: davinci_all_defconfig: set
CONFIG_DAVINCI_WATCHDOG=y
Go ahead and mark me down as tested if you want.
Tested-by: Adam Ford <aford173@...il.com>
> --
> 2.7.4
>
Powered by blists - more mailing lists