[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1516575793-30526-1-git-send-email-david@lechnology.com>
Date: Sun, 21 Jan 2018 17:03:13 -0600
From: David Lechner <david@...hnology.com>
To: linux-arm-kernel@...ts.infradead.org, linux-omap@...r.kernel.org,
linux-gpio@...r.kernel.org
Cc: David Lechner <david@...hnology.com>, linux-kernel@...r.kernel.org,
Tony Lindgren <tony@...mide.com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH] pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
This fixes pcs_request_gpio() in the pinctrl-single driver when
bits_per_mux != 0. It appears this was overlooked when the multiple
pins per register feature was added.
Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure
multiple pins of different modules")
Cc: Tony Lindgren <tony@...mide.com>
Cc: Haojian Zhuang <haojian.zhuang@...aro.org>
Cc: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: David Lechner <david@...hnology.com>
---
drivers/pinctrl/pinctrl-single.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 3501491..7a5e2f1 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -391,9 +391,25 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
|| pin < frange->offset)
continue;
mux_bytes = pcs->width / BITS_PER_BYTE;
- data = pcs->read(pcs->base + pin * mux_bytes) & ~pcs->fmask;
- data |= frange->gpiofunc;
- pcs->write(data, pcs->base + pin * mux_bytes);
+
+ if (pcs->bits_per_mux) {
+ int byte_num, offset, pin_shift;
+
+ byte_num = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
+ offset = (byte_num / mux_bytes) * mux_bytes;
+ pin_shift = pin % (pcs->width / pcs->bits_per_pin) *
+ pcs->bits_per_pin;
+
+ data = pcs->read(pcs->base + offset);
+ data &= ~(pcs->fmask << pin_shift);
+ data |= frange->gpiofunc << pin_shift;
+ pcs->write(data, pcs->base + offset);
+ } else {
+ data = pcs->read(pcs->base + pin * mux_bytes);
+ data &= ~pcs->fmask;
+ data |= frange->gpiofunc;
+ pcs->write(data, pcs->base + pin * mux_bytes);
+ }
break;
}
return 0;
--
2.7.4
Powered by blists - more mailing lists