linux-kernel - [PATCH 2/2] dmaengine: dmatest: add norandom option

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1516617881-30044-2-git-send-email-shunyong.yang@hxt-semitech.com>
Date:   Mon, 22 Jan 2018 18:44:41 +0800
From:   Yang Shunyong <shunyong.yang@...-semitech.com>
To:     <vinod.koul@...el.com>
CC:     <dan.j.williams@...el.com>, <dmaengine@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Yang Shunyong <shunyong.yang@...-semitech.com>
Subject: [PATCH 2/2] dmaengine: dmatest: add norandom option

Existing option noverify disables both random src/dst address offset
setup and data verification. Sometimes, we need to control random
src/dst address setup and verification separately, such as disabling
random to make sure that test covers addresses in all interleaving
banks in one run. This patch adds option norandom to disable random
offset setup. Option noverify has been changed to disable data
verification only.

Signed-off-by: Yang Shunyong <shunyong.yang@...-semitech.com>
---
 drivers/dma/dmatest.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 4cdccc3..cc3ab97 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -72,7 +72,11 @@
 
 static bool noverify;
 module_param(noverify, bool, 0644);
-MODULE_PARM_DESC(noverify, "Disable random data setup and verification");
+MODULE_PARM_DESC(noverify, "Disable data verification (default: verify)");
+
+static bool norandom;
+module_param(norandom, bool, 0644);
+MODULE_PARM_DESC(norandom, "Disable random offset setup (default: random)");
 
 static bool verbose;
 module_param(verbose, bool, 0644);
@@ -101,6 +105,7 @@ struct dmatest_params {
 	unsigned int	pq_sources;
 	int		timeout;
 	bool		noverify;
+	bool		norandom;
 };
 
 /**
@@ -573,7 +578,7 @@ static int dmatest_func(void *data)
 			break;
 		}
 
-		if (params->noverify)
+		if (params->norandom)
 			len = params->buf_size;
 		else
 			len = dmatest_random() % params->buf_size + 1;
@@ -584,17 +589,19 @@ static int dmatest_func(void *data)
 
 		total_len += len;
 
-		if (params->noverify) {
+		if (params->norandom) {
 			src_off = 0;
 			dst_off = 0;
 		} else {
-			start = ktime_get();
 			src_off = dmatest_random() % (params->buf_size - len + 1);
 			dst_off = dmatest_random() % (params->buf_size - len + 1);
 
 			src_off = (src_off >> align) << align;
 			dst_off = (dst_off >> align) << align;
+		}
 
+		if (!params->noverify) {
+			start = ktime_get();
 			dmatest_init_srcs(thread->srcs, src_off, len,
 					  params->buf_size, is_memset);
 			dmatest_init_dsts(thread->dsts, dst_off, len,
@@ -973,6 +980,7 @@ static void run_threaded_test(struct dmatest_info *info)
 	params->pq_sources = pq_sources;
 	params->timeout = timeout;
 	params->noverify = noverify;
+	params->norandom = norandom;
 
 	request_channels(info, DMA_MEMCPY);
 	request_channels(info, DMA_MEMSET);
-- 
1.8.3.1