[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1516626688-2302-1-git-send-email-rogerq@ti.com>
Date: Mon, 22 Jan 2018 15:11:24 +0200
From: Roger Quadros <rogerq@...com>
To: <balbi@...nel.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Roger Quadros <rogerq@...com>
Subject: [PATCH 0/4] usb: dwc3: Add dual-role support using OTG core
Hi Felipe,
Some platforms (e.g. TI's AM437x) don't have USB ID pin state available
over GPIO/extcon but need to rely on the DWC3 core's OTG block to
get the ID pin state instead.
This series implements simple dual-role functionality using DWC3's OTG block.
Debugfs 'mode' override is also functional so user can switch
between "otg", "host" or "device" modes for debug.
Although system suspend/resume isn't working yet in mainline for AM437x,
I've tested this series for system suspend/resume using a local tree.
This series depends on [1] and [2]
[1] https://www.mail-archive.com/linux-usb@vger.kernel.org/msg98771.html
[2] https://www.mail-archive.com/linux-usb@vger.kernel.org/msg98848.html
Roger Quadros (4):
usb: dwc3: prevent setting PRTCAP to OTG from debugfs
usb: dwc3: core.h: add some register definitions
usb: dwc3: add dual role support using OTG block
ARM: dts: am43xx: Enable dual-role mode for USB1
arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
drivers/usb/dwc3/core.c | 70 ++++-
drivers/usb/dwc3/core.h | 111 ++++++++
drivers/usb/dwc3/drd.c | 492 +++++++++++++++++++++++++++++++++--
6 files changed, 650 insertions(+), 29 deletions(-)
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists