| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180122082225.ovh4l4mu7uwnph3d@qschulz>
Date: Mon, 22 Jan 2018 09:22:25 +0100
From: Quentin Schulz <quentin.schulz@...e-electrons.com>
To: Jonathan Cameron <jic23@...nel.org>
Cc: knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
sre@...nel.org, linux@...linux.org.uk,
maxime.ripard@...e-electrons.com, lee.jones@...aro.org,
linux-iio@...r.kernel.org, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
thomas.petazzoni@...e-electrons.com, linux-sunxi@...glegroups.com,
julian.calaby@...il.com
Subject: Re: [PATCH v3 07/16] iio: adc: axp20x_adc: add support for AXP813 ADC
Hi Jonathan,
On Sun, Jan 21, 2018 at 12:26:55PM +0000, Jonathan Cameron wrote:
> On Mon, 15 Jan 2018 11:33:41 +0100
> Quentin Schulz <quentin.schulz@...e-electrons.com> wrote:
>
> > The X-Powers AXP813 PMIC is really close to what is already done for
> > AXP20X/AXP22X.
> >
> > There are two pairs of bits to set the rate (one for Voltage and Current
> > measurements and one for TS/GPIO0 voltage measurements) instead of one.
> >
> > The register to set the ADC rates is different from the one for
> > AXP20X/AXP22X.
> >
> > GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X.
> >
> > The scales to apply to the different inputs are unlike the ones from
> > AXP20X and AXP22X.
> >
> > Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
> > Acked-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Applied to the togreg branch of iio.git and pushed out as testing
> for the autobuilders to play with it.
>
> One thing that might be nice to tidy up in this driver though.
>
> CHECK drivers/iio/adc/axp20x_adc.c
> drivers/iio/adc/axp20x_adc.c:548:26: warning: dubious: !x & y
> drivers/iio/adc/axp20x_adc.c:553:26: warning: dubious: !x & y
>
> Those are 'interesting' code constructions. It may be worth being
> a little more verbose to keep sparse happy and suppress the
> warning.
>
Would adding a val = !!val; before the call to the macro be "verbose"
enough for you?
Sparse does not complain anymore after that.
Thanks,
Quentin
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/iio/adc/axp20x_adc.c | 123 ++++++++++++++++++++++++++++++++++++-
> > include/linux/mfd/axp20x.h | 2 +-
> > 2 files changed, 125 insertions(+)
> >
> > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> > index 3968053..7cdb8bc 100644
> > --- a/drivers/iio/adc/axp20x_adc.c
> > +++ b/drivers/iio/adc/axp20x_adc.c
> > @@ -35,8 +35,13 @@
> > #define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
> >
> > #define AXP20X_ADC_RATE_MASK GENMASK(7, 6)
> > +#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4)
> > +#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
> > #define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
> > #define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
> > +#define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x)
> > +#define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
> > +#define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
> >
> > #define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \
> > { \
> > @@ -95,6 +100,12 @@ enum axp22x_adc_channel_i {
> > AXP22X_BATT_DISCHRG_I,
> > };
> >
> > +enum axp813_adc_channel_v {
> > + AXP813_TS_IN = 0,
> > + AXP813_GPIO0_V,
> > + AXP813_BATT_V,
> > +};
> > +
> > static struct iio_map axp20x_maps[] = {
> > {
> > .consumer_dev_name = "axp20x-usb-power-supply",
> > @@ -197,6 +208,25 @@ static const struct iio_chan_spec axp22x_adc_channels[] = {
> > AXP20X_BATT_DISCHRG_I_H),
> > };
> >
> > +static const struct iio_chan_spec axp813_adc_channels[] = {
> > + {
> > + .type = IIO_TEMP,
> > + .address = AXP22X_PMIC_TEMP_H,
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > + BIT(IIO_CHAN_INFO_OFFSET),
> > + .datasheet_name = "pmic_temp",
> > + },
> > + AXP20X_ADC_CHANNEL(AXP813_GPIO0_V, "gpio0_v", IIO_VOLTAGE,
> > + AXP288_GP_ADC_H),
> > + AXP20X_ADC_CHANNEL(AXP813_BATT_V, "batt_v", IIO_VOLTAGE,
> > + AXP20X_BATT_V_H),
> > + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> > + AXP20X_BATT_CHRG_I_H),
> > + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
> > + AXP20X_BATT_DISCHRG_I_H),
> > +};
> > +
> > static int axp20x_adc_raw(struct iio_dev *indio_dev,
> > struct iio_chan_spec const *chan, int *val)
> > {
> > @@ -243,6 +273,18 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
> > return IIO_VAL_INT;
> > }
> >
> > +static int axp813_adc_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan, int *val)
> > +{
> > + struct axp20x_adc_iio *info = iio_priv(indio_dev);
> > +
> > + *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
> > + if (*val < 0)
> > + return *val;
> > +
> > + return IIO_VAL_INT;
> > +}
> > +
> > static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
> > {
> > switch (channel) {
> > @@ -273,6 +315,24 @@ static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
> > }
> > }
> >
> > +static int axp813_adc_scale_voltage(int channel, int *val, int *val2)
> > +{
> > + switch (channel) {
> > + case AXP813_GPIO0_V:
> > + *val = 0;
> > + *val2 = 800000;
> > + return IIO_VAL_INT_PLUS_MICRO;
> > +
> > + case AXP813_BATT_V:
> > + *val = 1;
> > + *val2 = 100000;
> > + return IIO_VAL_INT_PLUS_MICRO;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > static int axp20x_adc_scale_current(int channel, int *val, int *val2)
> > {
> > switch (channel) {
> > @@ -342,6 +402,26 @@ static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val,
> > }
> > }
> >
> > +static int axp813_adc_scale(struct iio_chan_spec const *chan, int *val,
> > + int *val2)
> > +{
> > + switch (chan->type) {
> > + case IIO_VOLTAGE:
> > + return axp813_adc_scale_voltage(chan->channel, val, val2);
> > +
> > + case IIO_CURRENT:
> > + *val = 1;
> > + return IIO_VAL_INT;
> > +
> > + case IIO_TEMP:
> > + *val = 100;
> > + return IIO_VAL_INT;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
> > int *val)
> > {
> > @@ -425,6 +505,26 @@ static int axp22x_read_raw(struct iio_dev *indio_dev,
> > }
> > }
> >
> > +static int axp813_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan, int *val,
> > + int *val2, long mask)
> > +{
> > + switch (mask) {
> > + case IIO_CHAN_INFO_OFFSET:
> > + *val = -2667;
> > + return IIO_VAL_INT;
> > +
> > + case IIO_CHAN_INFO_SCALE:
> > + return axp813_adc_scale(chan, val, val2);
> > +
> > + case IIO_CHAN_INFO_RAW:
> > + return axp813_adc_raw(indio_dev, chan, val);
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > static int axp20x_write_raw(struct iio_dev *indio_dev,
> > struct iio_chan_spec const *chan, int val, int val2,
> > long mask)
> > @@ -470,6 +570,10 @@ static const struct iio_info axp22x_adc_iio_info = {
> > .read_raw = axp22x_read_raw,
> > };
> >
> > +static const struct iio_info axp813_adc_iio_info = {
> > + .read_raw = axp813_read_raw,
> > +};
> > +
> > static int axp20x_adc_rate(struct axp20x_adc_iio *info, int rate)
> > {
> > return regmap_update_bits(info->regmap, AXP20X_ADC_RATE,
> > @@ -484,6 +588,13 @@ static int axp22x_adc_rate(struct axp20x_adc_iio *info, int rate)
> > AXP22X_ADC_RATE_HZ(rate));
> > }
> >
> > +static int axp813_adc_rate(struct axp20x_adc_iio *info, int rate)
> > +{
> > + return regmap_update_bits(info->regmap, AXP813_ADC_RATE,
> > + AXP813_ADC_RATE_MASK,
> > + AXP813_ADC_RATE_HZ(rate));
> > +}
> > +
> > struct axp_data {
> > const struct iio_info *iio_info;
> > int num_channels;
> > @@ -515,9 +626,20 @@ static const struct axp_data axp22x_data = {
> > .maps = axp22x_maps,
> > };
> >
> > +static const struct axp_data axp813_data = {
> > + .iio_info = &axp813_adc_iio_info,
> > + .num_channels = ARRAY_SIZE(axp813_adc_channels),
> > + .channels = axp813_adc_channels,
> > + .adc_en1_mask = AXP22X_ADC_EN1_MASK,
> > + .adc_rate = axp813_adc_rate,
> > + .adc_en2 = false,
> > + .maps = axp22x_maps,
> > +};
> > +
> > static const struct of_device_id axp20x_adc_of_match[] = {
> > { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, },
> > { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, },
> > + { .compatible = "x-powers,axp813-adc", .data = (void *)&axp813_data, },
> > { /* sentinel */ }
> > };
> > MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
> > @@ -525,6 +647,7 @@ MODULE_DEVICE_TABLE(of, axp20x_adc_of_match);
> > static const struct platform_device_id axp20x_adc_id_match[] = {
> > { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
> > { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
> > + { .name = "axp813-adc", .driver_data = (kernel_ulong_t)&axp813_data, },
> > { /* sentinel */ },
> > };
> > MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match);
> > diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> > index 080798f..82bf774 100644
> > --- a/include/linux/mfd/axp20x.h
> > +++ b/include/linux/mfd/axp20x.h
> > @@ -266,6 +266,8 @@ enum axp20x_variants {
> > #define AXP288_RT_BATT_V_H 0xa0
> > #define AXP288_RT_BATT_V_L 0xa1
> >
> > +#define AXP813_ADC_RATE 0x85
> > +
> > /* Fuel Gauge */
> > #define AXP288_FG_RDC1_REG 0xba
> > #define AXP288_FG_RDC0_REG 0xbb
>
Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)
Powered by blists - more mailing lists