| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <31352608-7dce-0e79-dc03-bd329ba4581d@huawei.com>
Date: Tue, 23 Jan 2018 18:20:48 +0800
From: Weilong Chen <chenweilong@...wei.com>
To: <dwmw2@...radead.org>, <joro@...tes.org>,
<iommu@...ts.linux-foundation.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
<chenweilong@...wei.com>, <qiaonuohan@...wei.com>,
Kefeng Wang <wangkefeng.wang@...wei.com>
Subject: Kdump kernel start failed with intel_iommu=on
Hi,
We came across this problem:
Second kernel hang with intel_iommu=on
We can reproduce the problem by the following steps:
1. start the kernel with intel_iommu=on
2. ifconfig eth6 up;ifconfig eth8 up.(eth6 is Intel Corporation 82599ES
10-Gigabit and eth8 is Broadcom Limited NetXtreme BCM5719 Gigabit Ethernet)
3. echo c > /proc/sysrq-trigger
Some infomation:
1. CPU: Intel(R) Xeon(R) CPU E5-2620 v2 @ 2.10GHz "Ivy Bridge-EP" (22
nm) Efficient Performance
2. # lspci | grep Eth
01:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit
Ethernet PCIe (rev 01)
01:00.1 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit
Ethernet PCIe (rev 01)
01:00.2 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit
Ethernet PCIe (rev 01)
01:00.3 Ethernet controller: Broadcom Limited NetXtreme BCM5719 Gigabit
Ethernet PCIe (rev 01)
82:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit
SFI/SFP+ Network Connection (rev 01)
82:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit
SFI/SFP+ Network Connection (rev 01)
3. # uname -a
Linux linux-BPxjsg 4.15.0-rc8 #1 SMP Mon Jan 22 20:22:21 CST 2018 x86_64
x86_64 x86_64 GNU/Linux
4.# cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-4.15.0-rc8 root=/dev/cpsVG/rootfs oops=panic
net.ifnames=0 biosdevname=0 noexec=on 8250.nr_uarts=8 efi=old_map
nmi_watchdog=1 intel_iommu=on selinux=0 pci=realloc console=tty0
console=ttyS0,115200 nohz=off highres=on hpet=enable
reserve_kbox_mem=16M crashkernel=334M@48M panic=3
crash_kexec_post_notifiers audit=0 coredump_filter=0x33f elevator=cfq
read_ahead_kb=512 nopku LANG=en_US.UTF-8
5. kexec load cmd:
/sbin/kexec -p --command-line="BOOT_IMAGE=/vmlinuz-4.15.0-rc8
oops=panic net.ifnames=0 biosdevname=0 noexec=on 8250.nr_uarts=8
efi=old_map nmi_watchdog=1 selinux=0 pci=realloc console=tty0
console=ttyS0,115200 nohz=off highres=on hpet=enable panic=3
crash_kexec_post_notifiers audit=0 coredump_filter=0x33f elevator=cfq
read_ahead_kb=512 nopku LANG=en_US.UTF-8
root=UUID="c3765029-27f3-49b4-be20-579a8dc03914" irqpoll reset_devices
cgroup_disable=memory mce=off numa=off udev.children-max=2 panic=10
rootflags=nofail acpi_no_memhotplug intel_iommu=off disable_cpu_apicid=0
nr_cpus=24" --initrd=/boot/initramfs-4.15.0-rc8kdump.img
/boot/vmlinuz-4.15.0-rc8
6.dmesg | grep IOMMU
[ 0.000000] DMAR: IOMMU enabled
[ 0.009000] DMAR-IR: IOAPIC id 10 under DRHD base 0xfbffe000 IOMMU 0
[ 0.010000] DMAR-IR: IOAPIC id 8 under DRHD base 0xcfffc000 IOMMU 1
[ 0.011000] DMAR-IR: IOAPIC id 9 under DRHD base 0xcfffc000 IOMMU 1
7.# dmesg | grep -i dma
[ 0.000000] ACPI: DMAR 0x000000007EF0D000 000118 (v01 INSYDE Romley
00000001 ACPI 00000001)
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8016 pages used for memmap
[ 0.000000] DMA32 zone: 513024 pages, LIFO batch:31
[ 0.000000] DMAR: IOMMU enabled
[ 0.001000] DMAR: Host address width 46
[ 0.002000] DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
[ 0.003000] DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap
d2078c106f0466 ecap f020de
[ 0.004000] DMAR: DRHD base: 0x000000cfffc000 flags: 0x1
[ 0.005000] DMAR: dmar1: reg_base_addr cfffc000 ver 1:0 cap
d2078c106f0466 ecap f020de
[ 0.006000] DMAR: ATSR flags: 0x0
[ 0.007000] DMAR: ATSR flags: 0x0
[ 0.008000] DMAR: RMRR base: 0x0000007e8b5000 end: 0x0000007e8bbfff
[ 0.009000] DMAR-IR: IOAPIC id 10 under DRHD base 0xfbffe000 IOMMU 0
[ 0.010000] DMAR-IR: IOAPIC id 8 under DRHD base 0xcfffc000 IOMMU 1
[ 0.011000] DMAR-IR: IOAPIC id 9 under DRHD base 0xcfffc000 IOMMU 1
[ 0.012000] DMAR-IR: HPET id 0 under DRHD base 0xcfffc000
[ 0.013000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt
out bit.
[ 0.013000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the
BIOS setting.
[ 0.015000] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 3.995469] pnp 00:04: [dma 0 disabled]
[ 5.049374] DMAR: dmar0: Using Queued invalidation
[ 5.054565] DMAR: dmar1: Using Queued invalidation
[ 5.059749] DMAR: Setting RMRR:
[ 5.065182] DMAR: Setting identity map for device 0000:00:1a.0
[0x7e8b5000 - 0x7e8bbfff]
[ 5.076264] DMAR: Setting identity map for device 0000:00:1d.0
[0x7e8b5000 - 0x7e8bbfff]
[ 5.085086] DMAR: Prepare 0-16MiB unity mapping for LPC
[ 5.092965] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 -
0xffffff]
[ 5.101014] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 7.305444] megaraid_sas 0000:02:00.0: 64 bit DMA mask and 32 bit
consistent mask
[ 7.478850] ata1: SATA max UDMA/133 abar m2048@...4b24000 port
0x94b24100 irq 53
[ 7.478851] ata2: SATA max UDMA/133 abar m2048@...4b24000 port
0x94b24180 irq 53
[ 7.478853] ata3: SATA max UDMA/133 abar m2048@...4b24000 port
0x94b24200 irq 53
[ 7.478855] ata4: SATA max UDMA/133 abar m2048@...4b24000 port
0x94b24280 irq 53
[ 7.478857] ata5: SATA max UDMA/133 abar m2048@...4b24000 port
0x94b24300 irq 53
[ 7.478858] ata6: SATA max UDMA/133 abar m2048@...4b24000 port
0x94b24380 irq 53
[ 20.344328] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 22.281179] tg3 0000:01:00.0 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[ 22.291362] tg3 0000:01:00.1 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
[ 22.302828] tg3 0000:01:00.2 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
[ 22.314845] tg3 0000:01:00.3 eth4: dma_rwctrl[00000001] dma_mask[64-bit]
8. Second kernel's boot log
[2018-01-23 15:01:15 INFO] linux-BPxjsg login: [ 230.074068] sysrq:
SysRq : Trigger a crash
[2018-01-23 15:01:15 INFO] [ 230.078554] BUG: unable to handle kernel
NULL pointer dereference at (null)
[2018-01-23 15:01:15 INFO] [ 230.087080] IP: sysrq_handle_crash+0x12/0x20
[2018-01-23 15:01:15 INFO] [ 230.091723] PGD 8000004fcbe84067 P4D
8000004fcbe84067 PUD 4fce77c067 PMD 0
[2018-01-23 15:01:15 INFO] [ 230.099054] Oops: 0002 [#1] SMP PTI
[2018-01-23 15:01:15 INFO] [ 230.102921] Modules linked in: fuse
ebtable_filter ebtables ip6table_filter ip6_tables ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat xt_addrtype iptable_filter
xt_conntrack br_netfilter vport_vxlan vxlan ip6_udp_tunnel udp_tunnel
bridge openvswitch nsh stp llc nf_conntrack_ipv6 nf_nat_ipv6 nf_nat_ipv4
nf_defrag_ipv6 nf_nat dm_thin_pool dm_persistent_data dm_bio_prison
dm_bufio loop iTCO_wdt iTCO_vendor_support intel_rapl sb_edac
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm ixgbe tg3
crct10dif_pclmul crc32_pclmul ptp ses enclosure ghash_clmulni_intel pcbc
aesni_intel sg mei_me ioatdma crypto_simd glue_helper ipmi_si pcspkr mei
pps_core mdio shpchp dca cryptd ipmi_devintf ipmi_msghandler i2c_i801
i2c_core lpc_ich wmi vhost_net tun vhost tap ip_tables ext4 mbcache jbd2
sd_mod isci
[2018-01-23 15:01:15 INFO] [ 230.176985] libsas ahci libahci
scsi_transport_sas libata serio_raw megaraid_sas nf_conntrack_ipv4
nf_defrag_ipv4 nf_conntrack dm_mod vfio_pci irqbypass vfio_virqfd
vfio_iommu_type1 vfio xt_sctp sctp libcrc32c crc32c_intel
[2018-01-23 15:01:15 INFO] [ 230.197784] CPU: 5 PID: 5194 Comm: bash
Not tainted 4.15.0-rc8 #1
[2018-01-23 15:01:15 INFO] [ 230.204244] Hardware name: Huawei
Technologies Co., Ltd. RH2288H V2-24S/BC11SRSG1, BIOS RMIBV516 06/14/2016
[2018-01-23 15:01:15 INFO] [ 230.214641] RIP:
0010:sysrq_handle_crash+0x12/0x20
[2018-01-23 15:01:15 INFO] [ 230.219804] RSP: 0018:ffffb8594f8cfe08
EFLAGS: 00010246
[2018-01-23 15:01:15 INFO] [ 230.225402] RAX: 000000000000000f RBX:
ffffffffb8168ac0 RCX: 0000000000000000
[2018-01-23 15:01:15 INFO] [ 230.232909] RDX: 0000000000000000 RSI:
ffff97dbded56938 RDI: 0000000000000063
[2018-01-23 15:01:15 INFO] [ 230.240418] RBP: 0000000000000063 R08:
0000000000000000 R09: 000000000000055d
[2018-01-23 15:01:15 INFO] [ 230.247929] R10: 0000000000000000 R11:
ffffb8594f8cfb80 R12: 0000000000000000
[2018-01-23 15:01:15 INFO] [ 230.255433] R13: 0000000000000003 R14:
0000000000000002 R15: 0000000000000000
[2018-01-23 15:01:15 INFO] [ 230.262942] FS: 00007f5b9c2fb740(0000)
GS:ffff97dbded40000(0000) knlGS:0000000000000000
[2018-01-23 15:01:15 INFO] [ 230.271704] CS: 0010 DS: 0000 ES: 0000
CR0: 0000000080050033
[2018-01-23 15:01:15 INFO] [ 230.277821] CR2: 0000000000000000 CR3:
0000004fca950001 CR4: 00000000001606e0
[2018-01-23 15:01:15 INFO] [ 230.285313] Call Trace:
[2018-01-23 15:01:15 INFO] [ 230.288156] __handle_sysrq+0xec/0x140
[2018-01-23 15:01:15 INFO] [ 230.292295] write_sysrq_trigger+0x24/0x40
[2018-01-23 15:01:15 INFO] [ 230.296770] proc_reg_write+0x39/0x70
[2018-01-23 15:01:15 INFO] [ 230.300826] __vfs_write+0x33/0x170
[2018-01-23 15:01:15 INFO] [ 230.304694] ? handle_mm_fault+0xc4/0x1d0
[2018-01-23 15:01:15 INFO] [ 230.309096] ? __do_page_fault+0x273/0x4d0
[2018-01-23 15:01:15 INFO] [ 230.313553] ? _cond_resched+0x15/0x30
[2018-01-23 15:01:15 INFO] [ 230.317682] vfs_write+0xad/0x1a0
[2018-01-23 15:01:15 INFO] [ 230.321377] SyS_write+0x52/0xc0
[2018-01-23 15:01:15 INFO] [ 230.324978]
entry_SYSCALL_64_fastpath+0x20/0x83
[2018-01-23 15:01:15 INFO] [ 230.329972] RIP: 0033:0x7f5b9b9e5c60
[2018-01-23 15:01:15 INFO] [ 230.333921] RSP: 002b:00007ffc8e60e588
EFLAGS: 00000246
[2018-01-23 15:01:15 INFO] [ 230.333923] Code: cc ff 0f 1f 44 00 00 0f
ff c3 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 c7 05
7d 3e bd 00 01 00 00 00 0f ae f8 <c6> 04 25 00 00 00 00 01 c3 0f 1f 44
00 00 0f 1f 44 00 00 53 8d
[2018-01-23 15:01:15 INFO] [ 230.359372] RIP:
sysrq_handle_crash+0x12/0x20 RSP: ffffb8594f8cfe08
[2018-01-23 15:01:15 INFO] [ 230.366003] CR2: 0000000000000000
[2018-01-23 15:01:15 INFO] [ 230.369715] ---[ end trace
6ef1213676a70a14 ]---
[2018-01-23 15:01:24 INFO] [ 238.980322] Kernel panic - not syncing:
Fatal exception
[2018-01-23 15:01:24 INFO] [ 238.988846] Kernel Offset: 0x36000000 from
0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[2018-01-23 15:01:33 INFO] [ 0.000000] Linux version 4.15.0-rc8
(root@...ux-BPxjsg) (gcc version 4.8.3 20140911 (EulerOS 4.8.3-10.h1)
(GCC)) #1 SMP Mon Jan 22 20:22:21 CST 2018
[2018-01-23 15:01:34 INFO] [ 0.000000] Command line:
BOOT_IMAGE=/vmlinuz-4.15.0-rc8 oops=panic net.ifnames=0 biosdevname=0
noexec=on 8250.nr_uarts=8 efi=old_map nmi_watchdog=1 selinux=0
pci=realloc console=tty0 console=ttyS0,115200 nohz=off highres=on
hpet=enable panic=3 crash_kexec_post_notifiers audit=0
coredump_filter=0x33f elevator=cfq read_ahead_kb=512 nopku
LANG=en_US.UTF-8 root=UUID="c3765029-27f3-49b4-be20-579a8dc03914"
irqpoll reset_devices cgroup_disable=memory mce=off numa=off
udev.children-max=2 panic=10 rootflags=nofail acpi_no_memhotplug
intel_iommu=off disable_cpu_apicid=0 nr_cpus=24 elfcorehdr=390528K
[2018-01-23 15:01:34 INFO] [ 0.000000] x86/fpu: Supporting XSAVE
feature 0x001: 'x87 floating point registers'
[2018-01-23 15:01:34 INFO] [ 0.000000] x86/fpu: Supporting XSAVE
feature 0x002: 'SSE registers'
[2018-01-23 15:01:34 INFO] [ 0.000000] x86/fpu: Supporting XSAVE
feature 0x004: 'AVX registers'
[2018-01-23 15:01:34 INFO] [ 0.000000] x86/fpu: xstate_offset[2]:
576, xstate_sizes[2]: 256
[2018-01-23 15:01:34 INFO] [ 0.000000] x86/fpu: Enabled xstate
features 0x7, context size is 832 bytes, using 'standard' format.
[2018-01-23 15:01:34 INFO] [ 0.000000] e820: BIOS-provided physical
RAM map:
[2018-01-23 15:01:34 INFO] [ 0.000000] BIOS-e820: [mem
0x0000000000001000-0x000000000009cfff] usable
[2018-01-23 15:01:34 INFO] [ 0.000000] BIOS-e820: [mem
0x0000000003000000-0x0000000017d5ffff] usable
[2018-01-23 15:01:34 INFO] [ 0.000000] BIOS-e820: [mem
0x000000007e8ff000-0x000000007eefefff] ACPI NVS
[2018-01-23 15:01:34 INFO] [ 0.000000] BIOS-e820: [mem
0x000000007eeff000-0x000000007effefff] ACPI data
[2018-01-23 15:01:34 INFO] [ 0.000000] NX (Execute Disable)
protection: active
[2018-01-23 15:01:34 INFO] [ 0.000000] random: fast init done
[2018-01-23 15:01:34 INFO] [ 0.000000] SMBIOS 2.7 present.
[2018-01-23 15:01:34 INFO] [ 0.000000] DMI: Huawei Technologies Co.,
Ltd. RH2288H V2-24S/BC11SRSG1, BIOS RMIBV516 06/14/2016
[2018-01-23 15:01:34 INFO] [ 0.000000] e820: last_pfn = 0x17d60
max_arch_pfn = 0x400000000
[2018-01-23 15:01:34 INFO] [ 0.000000] x86/PAT: Configuration [0-7]:
WB WC UC- UC WB WP UC- WT
[2018-01-23 15:01:34 INFO] [ 0.000000] found SMP MP-table at [mem
0x000fe1b0-0x000fe1bf] mapped at [ (ptrval)]
[2018-01-23 15:01:34 INFO] [ 0.000000] Using GB pages for direct mapping
[2018-01-23 15:01:34 INFO] [ 0.000000] RAMDISK: [mem
0x13d2f000-0x15ffffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: Early table checksum
verification disabled
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: RSDP 0x00000000000FE020
000024 (v02 INSYDE)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: XSDT 0x000000007EFFE170
0000BC (v01 INSYDE Romley 00000001 01000013)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: FACP 0x000000007EFFB000
0000F4 (v04 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: DSDT 0x000000007EFE9000
00DEE2 (v01 INSYDE Romley 00000000 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: FACS 0x000000007EDCA000
000040
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: FACS 0x000000007EDCA000
000040
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: SPMI 0x000000007EFFD000
000040 (v05 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: BOOT 0x000000007EFFC000
000028 (v01 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: APIC 0x000000007EFF9000
000BB6 (v03 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: MCFG 0x000000007EFF8000
00003C (v01 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: SLIC 0x000000007EFF7000
000176 (v01 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: SRAT 0x000000007EFE7000
001340 (v02 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: SLIT 0x000000007EFE6000
00003C (v01 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: BDAT 0x000000007EFE5000
000030 (v01 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: PRAD 0x000000007EFE4000
0000BC (v02 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: MSDM 0x000000007EFE3000
000055 (v03 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: SSDT 0x000000007EF0F000
0D3050 (v02 INSYDE Romley 00004000 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: HPET 0x000000007EFFA000
000038 (v01 INSYDE Romley 00000001 ACPI 00040000)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: WDAT 0x000000007EF0E000
000194 (v01 INSYDE INSYDE 00000001 MSFT 01000013)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: DMAR 0x000000007EF0D000
000118 (v01 INSYDE Romley 00000001 ACPI 00000001)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: HEST 0x000000007EF0C000
0000A8 (v01 INSYDE Romley 00000001 ? 00000001)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: ERST 0x000000007EF0B000
000230 (v01 INSYDE Romley 00000001 ? 00000001)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: BERT 0x000000007EF0A000
000030 (v01 INSYDE Romley 00000001 ? 00000001)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: EINJ 0x000000007EF09000
000130 (v01 INSYDE Romley 00000001 ? 00000001)
[2018-01-23 15:01:34 INFO] [ 0.000000] NUMA turned off
[2018-01-23 15:01:34 INFO] [ 0.000000] Faking a node at [mem
0x0000000000000000-0x0000000017d5ffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] NODE_DATA(0) allocated [mem
0x17d35000-0x17d5ffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] tsc: Fast TSC calibration
using PIT
[2018-01-23 15:01:34 INFO] [ 0.000000] Zone ranges:
[2018-01-23 15:01:34 INFO] [ 0.000000] DMA [mem
0x0000000000001000-0x0000000000ffffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] DMA32 [mem
0x0000000001000000-0x0000000017d5ffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] Normal empty
[2018-01-23 15:01:34 INFO] [ 0.000000] Device empty
[2018-01-23 15:01:34 INFO] [ 0.000000] Movable zone start for each node
[2018-01-23 15:01:34 INFO] [ 0.000000] Early memory node ranges
[2018-01-23 15:01:34 INFO] [ 0.000000] node 0: [mem
0x0000000000001000-0x000000000009cfff]
[2018-01-23 15:01:34 INFO] [ 0.000000] node 0: [mem
0x0000000003000000-0x0000000017d5ffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x0000000017d5ffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] Reserved but unavailable: 100
pages
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: PM-Timer IO Port: 0x408
[2018-01-23 15:01:34 INFO] [ 0.000000] APIC: Disabling requested cpu.
Processor 0/0x0 ignored.
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: X2APIC_NMI
(uid[0xffffffff] high edge lint[0x1])
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff]
high edge lint[0x1])
[2018-01-23 15:01:34 INFO] [ 0.000000] IOAPIC[0]: apic_id 8, version
32, address 0xfec00000, GSI 0-23
[2018-01-23 15:01:34 INFO] [ 0.000000] IOAPIC[1]: apic_id 9, version
32, address 0xfec01000, GSI 24-47
[2018-01-23 15:01:34 INFO] [ 0.000000] IOAPIC[2]: apic_id 10, version
32, address 0xfec40000, GSI 48-71
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 high level)
[2018-01-23 15:01:34 INFO] [ 0.000000] Using ACPI (MADT) for SMP
configuration information
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: HPET id: 0x8086a701
base: 0xfed00000
[2018-01-23 15:01:34 INFO] [ 0.000000] smpboot: 144 Processors
exceeds NR_CPUS limit of 24
[2018-01-23 15:01:34 INFO] [ 0.000000] smpboot: Allowing 24 CPUs, 1
hotplug CPUs
[2018-01-23 15:01:34 INFO] [ 0.000000] PM: Registered nosave memory:
[mem 0x00000000-0x00000fff]
[2018-01-23 15:01:34 INFO] [ 0.000000] PM: Registered nosave memory:
[mem 0x0009d000-0x02ffffff]
[2018-01-23 15:01:34 INFO] [ 0.000000] e820: [mem
0x7efff000-0xffffffff] available for PCI devices
[2018-01-23 15:01:34 INFO] [ 0.000000] Booting paravirtualized kernel
on bare hardware
[2018-01-23 15:01:34 INFO] [ 0.000000] clocksource: refined-jiffies:
mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[2018-01-23 15:01:34 INFO] [ 0.000000] setup_percpu: NR_CPUS:8192
nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
[2018-01-23 15:01:34 INFO] [ 0.000000] percpu: Embedded 45 pages/cpu
@ (ptrval) s145368 r8192 d30760 u262144
[2018-01-23 15:01:34 INFO] [ 0.000000] Built 1 zonelists, mobility
grouping on. Total pages: 84142
[2018-01-23 15:01:34 INFO] [ 0.000000] Policy zone: DMA32
[2018-01-23 15:01:34 INFO] [ 0.000000] Kernel command line:
BOOT_IMAGE=/vmlinuz-4.15.0-rc8 oops=panic net.ifnames=0 biosdevname=0
noexec=on 8250.nr_uarts=8 efi=old_map nmi_watchdog=1 selinux=0
pci=realloc console=tty0 console=ttyS0,115200 nohz=off highres=on
hpet=enable panic=3 crash_kexec_post_notifiers audit=0
coredump_filter=0x33f elevator=cfq read_ahead_kb=512 nopku
LANG=en_US.UTF-8 root=UUID="c3765029-27f3-49b4-be20-579a8dc03914"
irqpoll reset_devices cgroup_disable=memory mce=off numa=off
udev.children-max=2 panic=10 rootflags=nofail acpi_no_memhotplug
intel_iommu=off disable_cpu_apicid=0 nr_cpus=24 elfcorehdr=390528K
[2018-01-23 15:01:34 INFO] [ 0.000000] audit: disabled (until reboot)
[2018-01-23 15:01:34 INFO] [ 0.000000] x86: 'nopku' specified,
disabling Memory Protection Keys
[2018-01-23 15:01:34 INFO] [ 0.000000] Misrouted IRQ fixup and
polling support enabled
[2018-01-23 15:01:34 INFO] [ 0.000000] This may significantly impact
system performance
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: IOMMU disabled
[2018-01-23 15:01:34 INFO] [ 0.000000] Memory: 268532K/342000K
available (10252K kernel code, 2189K rwdata, 3488K rodata, 2256K init,
3068K bss, 73468K reserved, 0K cma-reserved)
[2018-01-23 15:01:34 INFO] [ 0.000000] SLUB: HWalign=64, Order=0-3,
MinObjects=0, CPUs=24, Nodes=1
[2018-01-23 15:01:34 INFO] [ 0.000000] Kernel/User page tables
isolation: enabled
[2018-01-23 15:01:34 INFO] [ 0.000000] ftrace: allocating 32500
entries in 127 pages
[2018-01-23 15:01:34 INFO] [ 0.000000] Hierarchical RCU implementation.
[2018-01-23 15:01:34 INFO] [ 0.000000] RCU restricting CPUs from
NR_CPUS=8192 to nr_cpu_ids=24.
[2018-01-23 15:01:34 INFO] [ 0.000000] RCU: Adjusting geometry for
rcu_fanout_leaf=16, nr_cpu_ids=24
[2018-01-23 15:01:34 INFO] [ 0.000000] NR_IRQS: 524544, nr_irqs:
1432, preallocated irqs: 16
[2018-01-23 15:01:34 INFO] [ 0.000000] Offload RCU callbacks from
CPUs: .
[2018-01-23 15:01:34 INFO] [ 0.000000] Spurious LAPIC timer interrupt
on cpu 0
[2018-01-23 15:01:34 INFO] [ 0.000000] Console: colour VGA+ 80x25
[2018-01-23 15:01:34 INFO] [ 0.000000] console [tty0] enabled
[2018-01-23 15:01:34 INFO] [ 0.000000] console [ttyS0] enabled
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: Core revision 20170831
[2018-01-23 15:01:34 INFO] [ 0.000000] ACPI: 2 ACPI AML tables
successfully acquired and loaded
[2018-01-23 15:01:34 INFO] [ 0.000000] clocksource: hpet: mask:
0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[2018-01-23 15:01:34 INFO] [ 0.000000] APIC: Switch to symmetric I/O
mode setup
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: Host address width 46
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: DRHD base:
0x000000fbffe000 flags: 0x0
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: dmar0: reg_base_addr
fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: DRHD base:
0x000000cfffc000 flags: 0x1
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: dmar1: reg_base_addr
cfffc000 ver 1:0 cap d2078c106f0466 ecap f020de
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: ATSR flags: 0x0
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: ATSR flags: 0x0
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR: RMRR base:
0x0000007e8b5000 end: 0x0000007e8bbfff
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: IOAPIC id 10 under
DRHD base 0xfbffe000 IOMMU 0
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: IOAPIC id 8 under
DRHD base 0xcfffc000 IOMMU 1
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: IOAPIC id 9 under
DRHD base 0xcfffc000 IOMMU 1
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: HPET id 0 under DRHD
base 0xcfffc000
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: x2apic is disabled
because BIOS sets x2apic opt out bit.
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: Use
'intremap=no_x2apic_optout' to override the BIOS setting.
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: Copied IR table for
dmar0 from previous kernel
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: Copied IR table for
dmar1 from previous kernel
[2018-01-23 15:01:34 INFO] [ 0.000000] DMAR-IR: Enabled IRQ remapping
in xapic mode
[2018-01-23 15:01:34 INFO] [ 0.000000] x2apic: IRQ remapping doesn't
support X2APIC mode
[2018-01-23 15:01:34 INFO] [ 0.000000] Switched APIC routing to
physical flat.
[2018-01-23 15:01:34 INFO] [ 0.000000] ..TIMER: vector=0x30 apic1=0
pin1=2 apic2=-1 pin2=-1
[2018-01-23 15:01:34 INFO] [ 0.005000] tsc: Fast TSC calibration
using PIT
[2018-01-23 15:01:34 INFO] [ 0.006000] tsc: Detected 2100.151 MHz
processor
[2018-01-23 15:01:34 INFO] [ 0.007000] Calibrating delay loop
(skipped), value calculated using timer frequency.. 4200.30 BogoMIPS
(lpj=2100151)
[2018-01-23 15:01:34 INFO] [ 0.008024] pid_max: default: 32768
minimum: 301
[2018-01-23 15:01:34 INFO] [ 0.009067] Security Framework initialized
[2018-01-23 15:01:34 INFO] [ 0.010027] SELinux: Disabled at boot.
[2018-01-23 15:01:34 INFO] [ 0.011168] Dentry cache hash table
entries: 65536 (order: 7, 524288 bytes)
[2018-01-23 15:01:34 INFO] [ 0.012084] Inode-cache hash table
entries: 32768 (order: 6, 262144 bytes)
[2018-01-23 15:01:34 INFO] [ 0.013039] Mount-cache hash table
entries: 1024 (order: 1, 8192 bytes)
[2018-01-23 15:01:35 INFO] [ 0.014029] Mountpoint-cache hash table
entries: 1024 (order: 1, 8192 bytes)
[2018-01-23 15:01:35 INFO] [ 0.016143] Disabling memory control group
subsystem
[2018-01-23 15:01:35 INFO] [ 0.017065] CPU: Physical Processor ID: 0
[2018-01-23 15:01:35 INFO] [ 0.018023] CPU: Processor Core ID: 5
[2018-01-23 15:01:35 INFO] [ 0.019037] ENERGY_PERF_BIAS: Set to
'normal', was 'performance'
[2018-01-23 15:01:35 INFO] [ 0.020026] ENERGY_PERF_BIAS: View and
update with x86_energy_perf_policy(8)
[2018-01-23 15:01:35 INFO] [ 0.021031] process: using mwait in idle
threads
[2018-01-23 15:01:35 INFO] [ 0.022025] Last level iTLB entries: 4KB
512, 2MB 8, 4MB 8
[2018-01-23 15:01:35 INFO] [ 0.023023] Last level dTLB entries: 4KB
512, 2MB 0, 4MB 0, 1GB 4
[2018-01-23 15:01:35 INFO] [ 0.024031] Spectre V2 mitigation:
Vulnerable: Minimal generic ASM retpoline
[2018-01-23 15:01:35 INFO] [ 0.025145] Freeing SMP alternatives
memory: 28K
[2018-01-23 15:01:35 INFO] [ 0.027536] smpboot: CPU0: Intel(R)
Xeon(R) CPU E5-2620 v2 @ 2.10GHz (family: 0x6, model: 0x3e, stepping: 0x4)
[2018-01-23 15:01:35 INFO] [ 0.028101] Performance Events: PEBS
fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Broken BIOS
detected, complain to your hardware vendor.
[2018-01-23 15:01:35 INFO] [ 0.029003] [Firmware Bug]: the BIOS has
corrupted hw-PMU resources (MSR 38d is b0)
[2018-01-23 15:01:35 INFO] [ 0.030004] Intel PMU driver.
[2018-01-23 15:01:35 INFO] [ 0.031007] ... version: 3
[2018-01-23 15:01:35 INFO] [ 0.032004] ... bit width: 48
[2018-01-23 15:01:35 INFO] [ 0.033001] ... generic registers: 4
[2018-01-23 15:01:35 INFO] [ 0.034001] ... value mask: 0000ffffffffffff
[2018-01-23 15:01:35 INFO] [ 0.035001] ... max period: 00007fffffffffff
[2018-01-23 15:01:35 INFO] [ 0.036001] ... fixed-purpose events: 3
[2018-01-23 15:01:35 INFO] [ 0.037001] ... event mask: 000000070000000f
[2018-01-23 15:01:35 INFO] [ 0.038060] Hierarchical SRCU implementation.
[2018-01-23 15:01:35 INFO] [ 0.041600] NMI watchdog: Enabled.
Permanently consumes one hw-PMU counter.
[2018-01-23 15:01:35 INFO] [ 0.042024] smp: Bringing up secondary
CPUs ...
[2018-01-23 15:01:35 INFO] [ 0.043094] x86: Booting SMP configuration:
[2018-01-23 15:01:35 INFO] [ 0.044008] .... node #0, CPUs: #1
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18
#19 #20 #21 #22
[2018-01-23 15:01:35 INFO] [ 0.130057] smp: Brought up 1 node, 23 CPUs
[2018-01-23 15:01:35 INFO] [ 0.132002] smpboot: Max logical packages: 2
[2018-01-23 15:01:35 INFO] [ 0.133002] smpboot: Total of 23
processors activated (96677.50 BogoMIPS)
[2018-01-23 15:01:35 INFO] [ 0.135538] devtmpfs: initialized
[2018-01-23 15:01:35 INFO] [ 0.136061] x86/mm: Memory block size: 128MB
[2018-01-23 15:01:35 INFO] [ 0.137268] evm: security.selinux
[2018-01-23 15:01:35 INFO] [ 0.138002] evm: security.ima
[2018-01-23 15:01:35 INFO] [ 0.139004] evm: security.capability
[2018-01-23 15:01:35 INFO] [ 0.140150] PM: Registering ACPI NVS
region [mem 0x7e8ff000-0x7eefefff] (6291456 bytes)
[2018-01-23 15:01:35 INFO] [ 0.141185] clocksource: jiffies: mask:
0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[2018-01-23 15:01:35 INFO] [ 0.142038] futex hash table entries: 8192
(order: 7, 524288 bytes)
[2018-01-23 15:01:35 INFO] [ 0.143226] pinctrl core: initialized
pinctrl subsystem
[2018-01-23 15:01:35 INFO] [ 0.144150] NET: Registered protocol family 16
[2018-01-23 15:01:35 INFO] [ 0.145300] cpuidle: using governor menu
[2018-01-23 15:01:35 INFO] [ 0.149173] Simple Boot Flag at 0x44 set
to 0x1
[2018-01-23 15:01:35 INFO] [ 0.154031] ACPI FADT declares the system
doesn't support PCIe ASPM, so disable it
[2018-01-23 15:01:35 INFO] [ 0.162003] ACPI: bus type PCI registered
[2018-01-23 15:01:35 INFO] [ 0.167002] acpiphp: ACPI Hot Plug PCI
Controller Driver version: 0.5
[2018-01-23 15:01:35 INFO] [ 0.174084] PCI: MMCONFIG for domain 0000
[bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[2018-01-23 15:01:35 INFO] [ 0.184019] PCI: not using MMCONFIG
[2018-01-23 15:01:35 INFO] [ 0.188004] PCI: Using configuration type
1 for base access
[2018-01-23 15:01:35 INFO] [ 0.194152] core: PMU erratum BJ122, BV98,
HSD29 worked around, HT is on
[2018-01-23 15:01:35 INFO] [ 0.203049] HugeTLB registered 1.00 GiB
page size, pre-allocated 0 pages
[2018-01-23 15:01:35 INFO] [ 0.210006] HugeTLB registered 2.00 MiB
page size, pre-allocated 0 pages
[2018-01-23 15:01:35 INFO] [ 0.217132] ACPI: Added _OSI(Module Device)
[2018-01-23 15:01:35 INFO] [ 0.222003] ACPI: Added _OSI(Processor Device)
[2018-01-23 15:01:35 INFO] [ 0.227002] ACPI: Added _OSI(3.0 _SCP
Extensions)
[2018-01-23 15:01:35 INFO] [ 0.232001] ACPI: Added _OSI(Processor
Aggregator Device)
[2018-01-23 15:01:35 INFO] [ 0.385903] ACPI: Interpreter enabled
[2018-01-23 15:01:35 INFO] [ 0.390027] ACPI: (supports S0 S4 S5)
[2018-01-23 15:01:35 INFO] [ 0.394002] ACPI: Using IOAPIC for
interrupt routing
[2018-01-23 15:01:35 INFO] [ 0.400072] PCI: MMCONFIG for domain 0000
[bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
[2018-01-23 15:01:35 INFO] [ 0.410528] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.420004] ACPI Error: Method
parse/execution failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.430005] ACPI Error: Method execution
failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.440160] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.450003] ACPI Error: Method
parse/execution failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.460004] ACPI Error: Method execution
failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.470086] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.480003] ACPI Error: Method
parse/execution failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.490003] ACPI Error: Method execution
failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.500084] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.510003] ACPI Error: Method
parse/execution failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.520003] ACPI Error: Method execution
failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.530428] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.540003] ACPI Error: Method
parse/execution failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.551004] ACPI Error: Method execution
failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.560098] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.570003] ACPI Error: Method
parse/execution failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.581004] ACPI Error: Method execution
failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.590032] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.600003] ACPI Error: Method
parse/execution failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.611003] ACPI Error: Method execution
failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.620033] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.630003] ACPI Error: Method
parse/execution failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.640003] ACPI Error: Method execution
failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.650424] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.660004] ACPI Error: Method
parse/execution failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.671004] ACPI Error: Method execution
failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:35 INFO] [ 0.681098] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:35 INFO] [ 0.690003] ACPI Error: Method
parse/execution failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:35 INFO] [ 0.701004] ACPI Error: Method execution
failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.711033] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.720003] ACPI Error: Method
parse/execution failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.731003] ACPI Error: Method execution
failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.740032] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.750003] ACPI Error: Method
parse/execution failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.761004] ACPI Error: Method execution
failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.770424] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.780003] ACPI Error: Method
parse/execution failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.791005] ACPI Error: Method execution
failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.801097] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.810003] ACPI Error: Method
parse/execution failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.821004] ACPI Error: Method execution
failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.831033] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.840002] ACPI Error: Method
parse/execution failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.851004] ACPI Error: Method execution
failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.861033] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.870003] ACPI Error: Method
parse/execution failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.881003] ACPI Error: Method execution
failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.891424] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.901004] ACPI Error: Method
parse/execution failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.911004] ACPI Error: Method execution
failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.921098] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.931003] ACPI Error: Method
parse/execution failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.941004] ACPI Error: Method execution
failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.951032] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.961003] ACPI Error: Method
parse/execution failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 0.971003] ACPI Error: Method execution
failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 0.981033] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 0.990003] ACPI Error: Method
parse/execution failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 1.001003] ACPI Error: Method execution
failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 1.011126] [Firmware Info]: PCI: MMCONFIG
at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources
[2018-01-23 15:01:36 INFO] [ 1.022002] PCI: not using MMCONFIG
[2018-01-23 15:01:36 INFO] [ 1.026037] HEST: Table parsing has been
initialized.
[2018-01-23 15:01:36 INFO] [ 1.031005] PCI: Using host bridge windows
from ACPI; if necessary, use "pci=nocrs" and report a bug
[2018-01-23 15:01:36 INFO] [ 1.041316] ACPI: Enabled 7 GPEs in block
00 to 3F
[2018-01-23 15:01:36 INFO] [ 1.048254] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 1.067005] ACPI Error: Method
parse/execution failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 1.078005] ACPI Error: Method execution
failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 1.090583] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 1.100004] ACPI Error: Method
parse/execution failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 1.110004] ACPI Error: Method execution
failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 1.120933] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 1.131004] ACPI Error: Method
parse/execution failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 1.141004] ACPI Error: Method execution
failed _SB.PCI2.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 1.151942] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:36 INFO] [ 1.162004] ACPI Error: Method
parse/execution failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:36 INFO] [ 1.172005] ACPI Error: Method execution
failed _SB.PCI3.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:36 INFO] [ 1.194374] ACPI: PCI Root Bridge [PCI0]
(domain 0000 [bus 00-7e])
[2018-01-23 15:01:36 INFO] [ 1.201010] acpi PNP0A08:00: _OSC: OS
supports [ASPM ClockPM Segments MSI]
[2018-01-23 15:01:36 INFO] [ 1.208091] acpi PNP0A08:00: _OSC: not
requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[2018-01-23 15:01:36 INFO] [ 1.219020] acpi PNP0A08:00: fail to add
MMCONFIG information, can't access extended PCI configuration space
under this bridge.
[2018-01-23 15:01:36 INFO] [ 1.231522] PCI host bridge to bus 0000:00
[2018-01-23 15:01:36 INFO] [ 1.236005] pci_bus 0000:00: root bus
resource [io 0x0000-0x0cf7 window]
[2018-01-23 15:01:36 INFO] [ 1.243002] pci_bus 0000:00: root bus
resource [io 0x1000-0xbfff window]
[2018-01-23 15:01:36 INFO] [ 1.250002] pci_bus 0000:00: root bus
resource [mem 0x000a0000-0x000bffff window]
[2018-01-23 15:01:36 INFO] [ 1.259002] pci_bus 0000:00: root bus
resource [mem 0x90000000-0xcfffefff window]
[2018-01-23 15:01:36 INFO] [ 1.267003] pci_bus 0000:00: root bus
resource [bus 00-7e]
[2018-01-23 15:01:36 INFO] [ 1.278166] pci 0000:00:01.0: PCI bridge
to [bus 01]
[2018-01-23 15:01:36 INFO] [ 1.283059] pci 0000:00:02.0: PCI bridge
to [bus 03]
[2018-01-23 15:01:36 INFO] [ 1.289181] pci 0000:00:02.2: PCI bridge
to [bus 02]
[2018-01-23 15:01:36 INFO] [ 1.294425] pci 0000:00:11.0: PCI bridge
to [bus 04]
[2018-01-23 15:01:36 INFO] [ 1.300067] pci 0000:00:1c.0: PCI bridge
to [bus 05]
[2018-01-23 15:01:36 INFO] [ 1.305059] pci 0000:00:1c.2: PCI bridge
to [bus 06]
[2018-01-23 15:01:36 INFO] [ 1.314021] pci 0000:00:1c.3: PCI bridge
to [bus 07]
[2018-01-23 15:01:36 INFO] [ 1.319090] pci 0000:00:1e.0: PCI bridge
to [bus 08] (subtractive decode)
[2018-01-23 15:01:36 INFO] [ 1.326402] ACPI: PCI Root Bridge [UNC0]
(domain 0000 [bus 7f])
[2018-01-23 15:01:36 INFO] [ 1.333005] acpi PNP0A03:00: _OSC: OS
supports [ASPM ClockPM Segments MSI]
[2018-01-23 15:01:36 INFO] [ 1.340005] acpi PNP0A03:00: _OSC failed
(AE_NOT_FOUND); disabling ASPM
[2018-01-23 15:01:36 INFO] [ 1.347011] acpi PNP0A03:00: fail to add
MMCONFIG information, can't access extended PCI configuration space
under this bridge.
[2018-01-23 15:01:36 INFO] [ 1.360070] PCI host bridge to bus 0000:7f
[2018-01-23 15:01:36 INFO] [ 1.364003] pci_bus 0000:7f: root bus
resource [bus 7f]
[2018-01-23 15:01:36 INFO] [ 1.372322] ACPI: PCI Root Bridge [PCI1]
(domain 0000 [bus 80-fe])
[2018-01-23 15:01:36 INFO] [ 1.379005] acpi PNP0A08:01: _OSC: OS
supports [ASPM ClockPM Segments MSI]
[2018-01-23 15:01:36 INFO] [ 1.386053] acpi PNP0A08:01: _OSC: not
requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[2018-01-23 15:01:36 INFO] [ 1.397009] acpi PNP0A08:01: fail to add
MMCONFIG information, can't access extended PCI configuration space
under this bridge.
[2018-01-23 15:01:36 INFO] [ 1.409194] PCI host bridge to bus 0000:80
[2018-01-23 15:01:36 INFO] [ 1.414004] pci_bus 0000:80: root bus
resource [io 0x0000-0x0cf7 window]
[2018-01-23 15:01:36 INFO] [ 1.421002] pci_bus 0000:80: root bus
resource [io 0xc000-0xffff window]
[2018-01-23 15:01:36 INFO] [ 1.428002] pci_bus 0000:80: root bus
resource [mem 0x000a0000-0x000bffff window]
[2018-01-23 15:01:36 INFO] [ 1.436002] pci_bus 0000:80: root bus
resource [mem 0xd0000000-0xfbffffff window]
[2018-01-23 15:01:36 INFO] [ 1.444004] pci_bus 0000:80: root bus
resource [bus 80-fe]
[2018-01-23 15:01:36 INFO] [ 1.451720] pci 0000:80:02.0: PCI bridge
to [bus 81]
[2018-01-23 15:01:36 INFO] [ 1.457277] pci 0000:80:02.2: PCI bridge
to [bus 82]
[2018-01-23 15:01:36 INFO] [ 1.463113] ACPI: PCI Root Bridge [UNC1]
(domain 0000 [bus ff])
[2018-01-23 15:01:36 INFO] [ 1.469004] acpi PNP0A03:01: _OSC: OS
supports [ASPM ClockPM Segments MSI]
[2018-01-23 15:01:36 INFO] [ 1.477005] acpi PNP0A03:01: _OSC failed
(AE_NOT_FOUND); disabling ASPM
[2018-01-23 15:01:36 INFO] [ 1.484011] acpi PNP0A03:01: fail to add
MMCONFIG information, can't access extended PCI configuration space
under this bridge.
[2018-01-23 15:01:36 INFO] [ 1.496064] PCI host bridge to bus 0000:ff
[2018-01-23 15:01:36 INFO] [ 1.500003] pci_bus 0000:ff: root bus
resource [bus ff]
[2018-01-23 15:01:36 INFO] [ 1.508259] APIC: Disabling requested cpu.
Processor 144/0x0 ignored.
[2018-01-23 15:01:36 INFO] [ 1.515003] ACPI: Unable to map lapic to
logical cpu number
[2018-01-23 15:01:36 INFO] [ 1.525509] ACPI: PCI Interrupt Link
[LNKA] (IRQs 1 *3 4 5 6 7 10 11 12 14 15), disabled.
[2018-01-23 15:01:36 INFO] [ 1.535054] ACPI: PCI Interrupt Link
[LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15), disabled.
[2018-01-23 15:01:36 INFO] [ 1.544052] ACPI: PCI Interrupt Link
[LNKC] (IRQs 1 3 4 5 *6 7 10 11 12 14 15), disabled.
[2018-01-23 15:01:36 INFO] [ 1.553050] ACPI: PCI Interrupt Link
[LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15), disabled.
[2018-01-23 15:01:36 INFO] [ 1.562051] ACPI: PCI Interrupt Link
[LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[2018-01-23 15:01:36 INFO] [ 1.571050] ACPI: PCI Interrupt Link
[LNKF] (IRQs 1 3 4 5 6 7 *10 11 12 14 15), disabled.
[2018-01-23 15:01:36 INFO] [ 1.580050] ACPI: PCI Interrupt Link
[LNKG] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[2018-01-23 15:01:36 INFO] [ 1.589051] ACPI: PCI Interrupt Link
[LNKH] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9, disabled.
[2018-01-23 15:01:36 INFO] [ 1.598178] pci 0000:07:00.0: vgaarb:
setting as boot VGA device
[2018-01-23 15:01:36 INFO] [ 1.599000] pci 0000:07:00.0: vgaarb: VGA
device added: decodes=io+mem,owns=io+mem,locks=none
[2018-01-23 15:01:36 INFO] [ 1.614019] pci 0000:07:00.0: vgaarb:
bridge control possible
[2018-01-23 15:01:36 INFO] [ 1.620002] vgaarb: loaded
[2018-01-23 15:01:36 INFO] [ 1.623135] SCSI subsystem initialized
[2018-01-23 15:01:36 INFO] [ 1.628026] ACPI: bus type USB registered
[2018-01-23 15:01:36 INFO] [ 1.632020] usbcore: registered new
interface driver usbfs
[2018-01-23 15:01:36 INFO] [ 1.638012] usbcore: registered new
interface driver hub
[2018-01-23 15:01:36 INFO] [ 1.644083] usbcore: registered new device
driver usb
[2018-01-23 15:01:36 INFO] [ 1.649070] EDAC MC: Ver: 3.0.0
[2018-01-23 15:01:36 INFO] [ 1.653229] PCI: Using ACPI for IRQ routing
[2018-01-23 15:01:36 INFO] [ 1.658331] NetLabel: Initializing
[2018-01-23 15:01:36 INFO] [ 1.662002] NetLabel: domain hash size = 128
[2018-01-23 15:01:36 INFO] [ 1.667001] NetLabel: protocols =
UNLABELED CIPSOv4 CALIPSO
[2018-01-23 15:01:36 INFO] [ 1.673022] NetLabel: unlabeled traffic
allowed by default
[2018-01-23 15:01:36 INFO] [ 1.679169] hpet0: at MMIO 0xfed00000,
IRQs 2, 8, 0, 0, 0, 0, 0, 0
[2018-01-23 15:01:36 INFO] [ 1.685003] hpet0: 8 comparators, 64-bit
14.318180 MHz counter
[2018-01-23 15:01:37 INFO] [ 1.694059] clocksource: Switched to
clocksource hpet
[2018-01-23 15:01:37 INFO] [ 1.708970] VFS: Disk quotas dquot_6.6.0
[2018-01-23 15:01:37 INFO] [ 1.713346] VFS: Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
[2018-01-23 15:01:37 INFO] [ 1.721479] pnp: PnP ACPI init
[2018-01-23 15:01:37 INFO] [ 1.725075] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:37 INFO] [ 1.734808] ACPI Error: Method
parse/execution failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:37 INFO] [ 1.745243] ACPI Error: Method execution
failed _SB.PCI0.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:37 INFO] [ 1.755056] pnp 00:00: can't evaluate _CRS: 1
[2018-01-23 15:01:37 INFO] [ 1.760106] system 00:01: [io
0x0680-0x069f] has been reserved
[2018-01-23 15:01:37 INFO] [ 1.766480] system 00:01: [io
0x0400-0x0453] has been reserved
[2018-01-23 15:01:37 INFO] [ 1.772834] system 00:01: [io
0x0458-0x047f] has been reserved
[2018-01-23 15:01:37 INFO] [ 1.779187] system 00:01: [io
0x0500-0x057f] has been reserved
[2018-01-23 15:01:37 INFO] [ 1.785539] system 00:01: [io
0x164e-0x164f] has been reserved
[2018-01-23 15:01:37 INFO] [ 1.792015] system 00:03: [io
0x0454-0x0457] has been reserved
[2018-01-23 15:01:37 INFO] [ 1.798492] ACPI Exception: AE_ERROR,
Returned by Handler for [PCI_Config] (20170831/evregion-300)
[2018-01-23 15:01:37 INFO] [ 1.808228] ACPI Error: Method
parse/execution failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/psparse-550)
[2018-01-23 15:01:37 INFO] [ 1.818631] ACPI Error: Method execution
failed _SB.PCI1.PDRC._CRS, AE_ERROR (20170831/uteval-103)
[2018-01-23 15:01:37 INFO] [ 1.828453] pnp 00:05: can't evaluate _CRS: 1
[2018-01-23 15:01:37 INFO] [ 1.833632] pnp: PnP ACPI: found 6 devices
[2018-01-23 15:01:37 INFO] [ 1.844527] clocksource: acpi_pm: mask:
0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[2018-01-23 15:01:37 INFO] [ 1.854192] pci 0000:02:00.0: can't claim
BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[2018-01-23 15:01:37 INFO] [ 1.864867] pci 0000:07:00.0: can't claim
BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[2018-01-23 15:01:37 INFO] [ 1.875581] pci 0000:00:01.0: PCI bridge
to [bus 01]
[2018-01-23 15:01:37 INFO] [ 1.880968] pci 0000:00:01.0: bridge
window [mem 0x94800000-0x948fffff 64bit pref]
[2018-01-23 15:01:37 INFO] [ 1.889461] pci 0000:00:02.0: PCI bridge
to [bus 03]
[2018-01-23 15:01:37 INFO] [ 1.894842] pci 0000:00:02.0: bridge
window [io 0x5000-0x5fff]
[2018-01-23 15:01:37 INFO] [ 1.901360] pci 0000:00:02.0: bridge
window [mem 0x94c00000-0x94dfffff]
[2018-01-23 15:01:37 INFO] [ 1.908567] pci 0000:00:02.0: bridge
window [mem 0x94e00000-0x94ffffff 64bit pref]
[2018-01-23 15:01:37 INFO] [ 1.917096] pci 0000:02:00.0: BAR 6:
assigned [mem 0x94a60000-0x94a7ffff pref]
[2018-01-23 15:01:37 INFO] [ 1.925097] pci 0000:00:02.2: PCI bridge
to [bus 02]
[2018-01-23 15:01:37 INFO] [ 1.930482] pci 0000:00:02.2: bridge
window [io 0x3000-0x3fff]
[2018-01-23 15:01:37 INFO] [ 1.936991] pci 0000:00:02.2: bridge
window [mem 0x94a00000-0x94afffff]
[2018-01-23 15:01:37 INFO] [ 1.944197] pci 0000:00:02.2: bridge
window [mem 0x95000000-0x951fffff 64bit pref]
[2018-01-23 15:01:37 INFO] [ 1.952712] pci 0000:00:11.0: PCI bridge
to [bus 04]
[2018-01-23 15:01:37 INFO] [ 1.958103] pci 0000:00:11.0: bridge
window [io 0x2000-0x2fff]
[2018-01-23 15:01:37 INFO] [ 1.964613] pci 0000:00:11.0: bridge
window [mem 0x94900000-0x949fffff]
[2018-01-23 15:01:37 INFO] [ 1.971820] pci 0000:00:11.0: bridge
window [mem 0x94000000-0x944fffff 64bit pref]
[2018-01-23 15:01:37 INFO] [ 1.980338] pci 0000:00:1c.0: PCI bridge
to [bus 05]
[2018-01-23 15:01:37 INFO] [ 1.985733] pci 0000:00:1c.2: PCI bridge
to [bus 06]
[2018-01-23 15:01:37 INFO] [ 1.991135] pci 0000:07:00.0: BAR 6: no
space for [mem size 0x00010000 pref]
[2018-01-23 15:01:37 INFO] [ 1.998594] pci 0000:07:00.0: BAR 6:
failed to assign [mem size 0x00010000 pref]
[2018-01-23 15:01:37 INFO] [ 2.006762] pci 0000:00:1c.3: PCI bridge
to [bus 07]
[2018-01-23 15:01:37 INFO] [ 2.012149] pci 0000:00:1c.3: bridge
window [mem 0x94600000-0x947fffff]
[2018-01-23 15:01:37 INFO] [ 2.019361] pci 0000:00:1c.3: bridge
window [mem 0x90000000-0x93ffffff 64bit pref]
[2018-01-23 15:01:37 INFO] [ 2.027877] pci 0000:00:1e.0: PCI bridge
to [bus 08]
[2018-01-23 15:01:37 INFO] [ 2.033362] pci 0000:80:02.0: PCI bridge
to [bus 81]
[2018-01-23 15:01:37 INFO] [ 2.038754] pci 0000:80:02.2: PCI bridge
to [bus 82]
[2018-01-23 15:01:37 INFO] [ 2.044140] pci 0000:80:02.2: bridge
window [io 0xc000-0xcfff]
[2018-01-23 15:01:37 INFO] [ 2.050652] pci 0000:80:02.2: bridge
window [mem 0xd0300000-0xd06fffff]
[2018-01-23 15:01:37 INFO] [ 2.057851] pci 0000:80:02.2: bridge
window [mem 0xd0000000-0xd01fffff 64bit pref]
[2018-01-23 15:01:37 INFO] [ 2.066446] NET: Registered protocol family 2
[2018-01-23 15:01:37 INFO] [ 2.071531] TCP established hash table
entries: 4096 (order: 3, 32768 bytes)
[2018-01-23 15:01:37 INFO] [ 2.088751] TCP bind hash table entries:
4096 (order: 4, 65536 bytes)
[2018-01-23 15:01:37 INFO] [ 2.095616] TCP: Hash tables configured
(established 4096 bind 4096)
[2018-01-23 15:01:37 INFO] [ 2.102460] UDP hash table entries: 256
(order: 1, 8192 bytes)
[2018-01-23 15:01:37 INFO] [ 2.108705] UDP-Lite hash table entries:
256 (order: 1, 8192 bytes)
[2018-01-23 15:01:37 INFO] [ 2.115507] NET: Registered protocol family 1
[2018-01-23 15:01:37 INFO] [ 2.120881] pci 0000:02:00.0: [Firmwai
[2018-01-23 15:01:37 INFO] [ 2.132161] pci 0000:07:00.0: Video device
with shadowed ROM at [mem 0x000c0000-0x000dffff]
[2018-01-23 15:01:37 INFO] [ 2.141489] Unpacking initramfs...
[2018-01-23 15:01:38 INFO] [ 2.814841] Freeing initrd memory: 35652K
[2018-01-23 15:01:38 INFO] [ 2.821165] RAPL PMU: API unit is 2^-32
Joules, 3 fixed counters, 163840 ms ovfl timer
[2018-01-23 15:01:38 INFO] [ 2.829852] RAPL PMU: hw unit of domain
pp0-core 2^-16 Joules
[2018-01-23 15:01:38 INFO] [ 2.836017] RAPL PMU: hw unit of domain
package 2^-16 Joules
[2018-01-23 15:01:38 INFO] [ 2.842105] RAPL PMU: hw unit of domain
dram 2^-16 Joules
[2018-01-23 15:01:38 INFO] [ 2.852900] Initialise system trusted keyrings
[2018-01-23 15:01:38 INFO] [ 2.857776] Key type blacklist registered
[2018-01-23 15:01:38 INFO] [ 2.862252] workingset: timestamp_bits=36
max_order=17 bucket_order=0
[2018-01-23 15:01:38 INFO] [ 2.870237] zbud: loaded
[2018-01-23 15:01:38 INFO] [ 2.929909] NET: Registered protocol family 38
[2018-01-23 15:01:38 INFO] [ 2.934782] Key type asymmetric registered
[2018-01-23 15:01:38 INFO] [ 2.939307] Asymmetric key parser 'x509'
registered
[2018-01-23 15:01:38 INFO] [ 2.944621] Block layer SCSI generic (bsg)
driver version 0.4 loaded (major 249)
[2018-01-23 15:01:38 INFO] [ 2.952876] io scheduler noop registered
[2018-01-23 15:01:38 INFO] [ 2.957222] io scheduler deadline registered
[2018-01-23 15:01:38 INFO] [ 2.961956] io scheduler cfq registered
(default)
[2018-01-23 15:01:38 INFO] [ 2.967091] io scheduler mq-deadline
registered
[2018-01-23 15:01:38 INFO] [ 2.972037] io scheduler kyber registered
[2018-01-23 15:01:38 INFO] [ 2.976716] atomic64_test: passed for
x86-64 platform with CX8 and with SSE
[2018-01-23 15:01:38 INFO] [ 3.022243] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[2018-01-23 15:01:38 INFO] [ 3.030427] ACPI: Power Button [PWRF]
[2018-01-23 15:01:38 INFO] [ 3.059915] ERST: Error Record
Serialization Table (ERST) support is initialized.
[2018-01-23 15:01:38 INFO] [ 3.068173] pstore: using zlib compression
[2018-01-23 15:01:38 INFO] [ 3.072675] pstore: Registered erst as
persistent store backend
[2018-01-23 15:01:38 INFO] [ 3.079317] GHES: APEI firmware first mode
is enabled by APEI bit and WHEA _OSC.
[2018-01-23 15:01:38 INFO] [ 3.087573] Serial: 8250/16550 driver, 8
ports, IRQ sharing enabled
[2018-01-23 15:01:38 INFO] [ 3.114931] 00:04: ttyS0 at I/O 0x3f8 (irq
= 4, base_baud = 115200) is a 16550A
[2018-01-23 15:01:38 INFO] [ 3.123878] Non-volatile memory driver v1.3
[2018-01-23 15:01:38 INFO] [ 3.128544] Linux agpgart interface v0.103
[2018-01-23 15:01:38 INFO] [ 3.135321] rdac: device handler registered
[2018-01-23 15:01:38 INFO] [ 3.139965] hp_sw: device handler registered
[2018-01-23 15:01:38 INFO] [ 3.144642] emc: device handler registered
[2018-01-23 15:01:38 INFO] [ 3.149240] alua: device handler registered
[2018-01-23 15:01:38 INFO] [ 3.153880] libphy: Fixed MDIO Bus: probed
[2018-01-23 15:01:38 INFO] [ 3.158457] ehci_hcd: USB 2.0 'Enhanced'
Host Controller (EHCI) Driver
[2018-01-23 15:01:38 INFO] [ 3.165408] ehci-pci: EHCI PCI platform driver
[2018-01-23 15:01:38 INFO] [ 3.170423] ehci-pci 0000:00:1a.0: EHCI
Host Controller
[2018-01-23 15:01:38 INFO] [ 3.176116] ehci-pci 0000:00:1a.0: new USB
bus registered, assigned bus number 1
[2018-01-23 15:01:38 INFO] [ 3.184300] ehci-pci 0000:00:1a.0: debug
port 2
[2018-01-23 15:01:38 INFO] [ 3.193177] ehci-pci 0000:00:1a.0: irq 16,
io mem 0x94b26000
[2018-01-23 15:01:38 INFO] [ 3.206050] ehci-pci 0000:00:1a.0: USB 2.0
started, EHCI 1.00
[2018-01-23 15:01:38 INFO] [ 3.212265] usb usb1: New USB device
found, idVendor=1d6b, idProduct=0002
[2018-01-23 15:01:38 INFO] [ 3.219463] usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
[2018-01-23 15:01:38 INFO] [ 3.227460] usb usb1: Product: EHCI Host
Controller
[2018-01-23 15:01:38 INFO] [ 3.232759] usb usb1: Manufacturer: Linux
4.15.0-rc8 ehci_hcd
[2018-01-23 15:01:38 INFO] [ 3.238920] usb usb1: SerialNumber:
0000:00:1a.0
[2018-01-23 15:01:38 INFO] [ 3.244091] hub 1-0:1.0: USB hub found
[2018-01-23 15:01:38 INFO] [ 3.248277] hub 1-0:1.0: 6 ports detected
[2018-01-23 15:01:38 INFO] [ 3.252991] ehci-pci 0000:00:1d.0: EHCI
Host Controller
[2018-01-23 15:01:38 INFO] [ 3.258694] ehci-pci 0000:00:1d.0: new USB
bus registered, assigned bus number 2
[2018-01-23 15:01:38 INFO] [ 3.266874] ehci-pci 0000:00:1d.0: debug
port 2
[2018-01-23 15:01:38 INFO] [ 3.275750] ehci-pci 0000:00:1d.0: irq 23,
io mem 0x94b25000
[2018-01-23 15:01:38 INFO] [ 3.288054] ehci-pci 0000:00:1d.0: USB 2.0
started, EHCI 1.00
[2018-01-23 15:01:38 INFO] [ 3.294267] usb usb2: New USB device
found, idVendor=1d6b, idProduct=0002
[2018-01-23 15:01:38 INFO] [ 3.301451] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
[2018-01-23 15:01:38 INFO] [ 3.309452] usb usb2: Product: EHCI Host
Controller
[2018-01-23 15:01:38 INFO] [ 3.314741] usb usb2: Manufacturer: Linux
4.15.0-rc8 ehci_hcd
[2018-01-23 15:01:38 INFO] [ 3.320893] usb usb2: SerialNumber:
0000:00:1d.0
[2018-01-23 15:01:38 INFO] [ 3.326071] hub 2-0:1.0: USB hub found
[2018-01-23 15:01:38 INFO] [ 3.330245] hub 2-0:1.0: 8 ports detected
[2018-01-23 15:01:38 INFO] [ 3.334835] ohci_hcd: USB 1.1 'Open' Host
Controller (OHCI) Driver
[2018-01-23 15:01:38 INFO] [ 3.341437] ohci-pci: OHCI PCI platform driver
[2018-01-23 15:01:38 INFO] [ 3.346326] uhci_hcd: USB Universal Host
Controller Interface driver
[2018-01-23 15:01:38 INFO] [ 3.353157] usbcore: registered new
interface driver usbserial_generic
I also post this bug to kernel bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=198559
thanks
.
.
Powered by blists - more mailing lists