| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1516974528-11120-13-git-send-email-jacopo+renesas@jmondi.org>
Date: Fri, 26 Jan 2018 14:48:44 +0100
From: Jacopo Mondi <jacopo+renesas@...ndi.org>
To: laurent.pinchart@...asonboard.com, magnus.damm@...il.com,
geert@...der.be, hverkuil@...all.nl, mchehab@...nel.org,
festevam@...il.com, sakari.ailus@....fi, robh+dt@...nel.org,
mark.rutland@....com, pombredanne@...b.com
Cc: Jacopo Mondi <jacopo+renesas@...ndi.org>,
linux-renesas-soc@...r.kernel.org, linux-media@...r.kernel.org,
linux-sh@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v7 8/9] media: i2c: tw9910: Remove soc_camera dependencies
Remove soc_camera framework dependencies from tw9910 sensor driver.
- Handle clock and gpios
- Register async subdevice
- Remove soc_camera specific g/s_mbus_config operations
- Add kernel doc to driver interface header file
- Adjust build system
This commit does not remove the original soc_camera based driver as long
as other platforms depends on soc_camera-based CEU driver.
Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@...co.com>
---
drivers/media/i2c/Kconfig | 9 +++
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/tw9910.c | 162 ++++++++++++++++++++++++++++-----------------
include/media/i2c/tw9910.h | 9 +++
4 files changed, 120 insertions(+), 61 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index a61d7f4..804a1bf 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -423,6 +423,15 @@ config VIDEO_TW9906
To compile this driver as a module, choose M here: the
module will be called tw9906.
+config VIDEO_TW9910
+ tristate "Techwell TW9910 video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for Techwell TW9910 NTSC/PAL/SECAM video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tw9910.
+
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L2 && I2C
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index fb99293..e26544f 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
obj-$(CONFIG_VIDEO_TW2804) += tw2804.o
obj-$(CONFIG_VIDEO_TW9903) += tw9903.o
obj-$(CONFIG_VIDEO_TW9906) += tw9906.o
+obj-$(CONFIG_VIDEO_TW9910) += tw9910.o
obj-$(CONFIG_VIDEO_CS3308) += cs3308.o
obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
diff --git a/drivers/media/i2c/tw9910.c b/drivers/media/i2c/tw9910.c
index bdb5e0a..96792df 100644
--- a/drivers/media/i2c/tw9910.c
+++ b/drivers/media/i2c/tw9910.c
@@ -1,6 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* tw9910 Video Driver
*
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@...ndi.org>
+ *
* Copyright (C) 2008 Renesas Solutions Corp.
* Kuninori Morimoto <morimoto.kuninori@...esas.com>
*
@@ -10,12 +13,10 @@
* Copyright 2006-7 Jonathan Corbet <corbet@....net>
* Copyright (C) 2008 Magnus Damm
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@...gutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/i2c.h>
@@ -25,9 +26,7 @@
#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
-#include <media/soc_camera.h>
#include <media/i2c/tw9910.h>
-#include <media/v4l2-clk.h>
#include <media/v4l2-subdev.h>
#define GET_ID(val) ((val & 0xF8) >> 3)
@@ -228,8 +227,10 @@ struct tw9910_scale_ctrl {
struct tw9910_priv {
struct v4l2_subdev subdev;
- struct v4l2_clk *clk;
+ struct clk *clk;
struct tw9910_video_info *info;
+ struct gpio_desc *pdn_gpio;
+ struct gpio_desc *rstb_gpio;
const struct tw9910_scale_ctrl *scale;
v4l2_std_id norm;
u32 revision;
@@ -582,13 +583,66 @@ static int tw9910_s_register(struct v4l2_subdev *sd,
}
#endif
+static int tw9910_power_on(struct tw9910_priv *priv)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ int ret;
+
+ if (priv->clk) {
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+ }
+
+ if (priv->pdn_gpio) {
+ gpiod_set_value(priv->pdn_gpio, 0);
+ usleep_range(500, 1000);
+ }
+
+ /*
+ * FIXME: The reset signal is connected to a shared GPIO on some
+ * platforms (namely the SuperH Migo-R). Until a framework becomes
+ * available to handle this cleanly, request the GPIO temporarily
+ * to avoid conflicts.
+ */
+ priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(priv->rstb_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
+ return PTR_ERR(priv->rstb_gpio);
+ }
+
+ if (priv->rstb_gpio) {
+ gpiod_set_value(priv->rstb_gpio, 1);
+ usleep_range(500, 1000);
+ gpiod_set_value(priv->rstb_gpio, 0);
+ usleep_range(500, 1000);
+
+ gpiod_put(priv->rstb_gpio);
+ }
+
+ return 0;
+}
+
+static int tw9910_power_off(struct tw9910_priv *priv)
+{
+ clk_disable_unprepare(priv->clk);
+
+ if (priv->pdn_gpio) {
+ gpiod_set_value(priv->pdn_gpio, 1);
+ usleep_range(500, 1000);
+ }
+
+ return 0;
+}
+
static int tw9910_s_power(struct v4l2_subdev *sd, int on)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
struct tw9910_priv *priv = to_tw9910(client);
- return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+ return on ? tw9910_power_on(priv) :
+ tw9910_power_off(priv);
}
static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
@@ -614,7 +668,7 @@ static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
* set bus width
*/
val = 0x00;
- if (SOCAM_DATAWIDTH_16 == priv->info->buswidth)
+ if (priv->info->buswidth == 16)
val = LEN;
ret = tw9910_mask_set(client, OPFORM, LEN, val);
@@ -799,8 +853,7 @@ static int tw9910_video_probe(struct i2c_client *client)
/*
* tw9910 only use 8 or 16 bit bus width
*/
- if (SOCAM_DATAWIDTH_16 != priv->info->buswidth &&
- SOCAM_DATAWIDTH_8 != priv->info->buswidth) {
+ if (priv->info->buswidth != 16 && priv->info->buswidth != 8) {
dev_err(&client->dev, "bus width error\n");
return -ENODEV;
}
@@ -856,45 +909,6 @@ static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
return 0;
}
-static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
- struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
- cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
- V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
- V4L2_MBUS_DATA_ACTIVE_HIGH;
- cfg->type = V4L2_MBUS_PARALLEL;
- cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- return 0;
-}
-
-static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
- const struct v4l2_mbus_config *cfg)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
- u8 val = VSSL_VVALID | HSSL_DVALID;
- unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg);
-
- /*
- * set OUTCTR1
- *
- * We use VVALID and DVALID signals to control VSYNC and HSYNC
- * outputs, in this mode their polarity is inverted.
- */
- if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
- val |= HSP_HI;
-
- if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
- val |= VSP_HI;
-
- return i2c_smbus_write_byte_data(client, OUTCTR1, val);
-}
-
static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
{
*norm = V4L2_STD_NTSC | V4L2_STD_PAL;
@@ -905,8 +919,6 @@ static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
.s_std = tw9910_s_std,
.g_std = tw9910_g_std,
.s_stream = tw9910_s_stream,
- .g_mbus_config = tw9910_g_mbus_config,
- .s_mbus_config = tw9910_s_mbus_config,
.g_tvnorms = tw9910_g_tvnorms,
};
@@ -935,15 +947,14 @@ static int tw9910_probe(struct i2c_client *client,
struct tw9910_video_info *info;
struct i2c_adapter *adapter =
to_i2c_adapter(client->dev.parent);
- struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
int ret;
- if (!ssdd || !ssdd->drv_priv) {
+ if (!client->dev.platform_data) {
dev_err(&client->dev, "TW9910: missing platform data!\n");
return -EINVAL;
}
- info = ssdd->drv_priv;
+ info = client->dev.platform_data;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev,
@@ -959,13 +970,37 @@ static int tw9910_probe(struct i2c_client *client,
v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
- priv->clk = v4l2_clk_get(&client->dev, "mclk");
- if (IS_ERR(priv->clk))
+ priv->clk = clk_get(&client->dev, "xti");
+ if (PTR_ERR(priv->clk) == -ENOENT) {
+ priv->clk = NULL;
+ } else if (IS_ERR(priv->clk)) {
+ dev_err(&client->dev, "Unable to get xti clock\n");
return PTR_ERR(priv->clk);
+ }
+
+ priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->pdn_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"pdn\"");
+ ret = PTR_ERR(priv->pdn_gpio);
+ goto error_clk_put;
+ }
ret = tw9910_video_probe(client);
if (ret < 0)
- v4l2_clk_put(priv->clk);
+ goto error_gpio_put;
+
+ ret = v4l2_async_register_subdev(&priv->subdev);
+ if (ret)
+ goto error_gpio_put;
+
+ return ret;
+
+error_gpio_put:
+ if (priv->pdn_gpio)
+ gpiod_put(priv->pdn_gpio);
+error_clk_put:
+ clk_put(priv->clk);
return ret;
}
@@ -973,7 +1008,12 @@ static int tw9910_probe(struct i2c_client *client,
static int tw9910_remove(struct i2c_client *client)
{
struct tw9910_priv *priv = to_tw9910(client);
- v4l2_clk_put(priv->clk);
+
+ if (priv->pdn_gpio)
+ gpiod_put(priv->pdn_gpio);
+ clk_put(priv->clk);
+ v4l2_device_unregister_subdev(&priv->subdev);
+
return 0;
}
@@ -994,6 +1034,6 @@ static struct i2c_driver tw9910_i2c_driver = {
module_i2c_driver(tw9910_i2c_driver);
-MODULE_DESCRIPTION("SoC Camera driver for tw9910");
+MODULE_DESCRIPTION("V4L2 driver for TW9910 video decoder");
MODULE_AUTHOR("Kuninori Morimoto");
MODULE_LICENSE("GPL v2");
diff --git a/include/media/i2c/tw9910.h b/include/media/i2c/tw9910.h
index 90bcf1f..bec8f7b 100644
--- a/include/media/i2c/tw9910.h
+++ b/include/media/i2c/tw9910.h
@@ -18,6 +18,9 @@
#include <media/soc_camera.h>
+/**
+ * tw9910_mpout_pin - MPOUT (multi-purpose output) pin functions
+ */
enum tw9910_mpout_pin {
TW9910_MPO_VLOSS,
TW9910_MPO_HLOCK,
@@ -29,6 +32,12 @@ enum tw9910_mpout_pin {
TW9910_MPO_RTCO,
};
+/**
+ * tw9910_video_info - tw9910 driver interface structure
+ * @buswidth: Parallel data bus width (8 or 16).
+ * @mpout: Selected function of MPOUT (multi-purpose output) pin.
+ * See &enum tw9910_mpout_pin
+ */
struct tw9910_video_info {
unsigned long buswidth;
enum tw9910_mpout_pin mpout;
--
2.7.4
Powered by blists - more mailing lists