| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1517306302-27957-1-git-send-email-jacopo+renesas@jmondi.org>
Date: Tue, 30 Jan 2018 10:58:11 +0100
From: Jacopo Mondi <jacopo+renesas@...ndi.org>
To: laurent.pinchart@...asonboard.com, magnus.damm@...il.com,
geert@...der.be, hverkuil@...all.nl, mchehab@...nel.org,
festevam@...il.com, sakari.ailus@....fi, robh+dt@...nel.org,
mark.rutland@....com, pombredanne@...b.com
Cc: Jacopo Mondi <jacopo+renesas@...ndi.org>,
linux-renesas-soc@...r.kernel.org, linux-media@...r.kernel.org,
linux-sh@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v8 00/11] Renesas Capture Engine Unit (CEU) V4L2 driver
Hello,
this 8th round has two minor modifications compared to v7:
- Fixed Geert's comments on RZ/A1-H/L/M in bindings documentation
- Calculate the PLL divisor/multiplier to generate the proper pixel clock
for ov772x in place of using static tables.
Series based on top of Hans':
[PATCHv2 0/9] media: replace g/s_parm by g/s_frame_interval
and makes use of newly introduced v4l2_g/s_parm_cap() functions from v4l2-common
in CEU's g/s_parm() callbacks.
A branch for testing is available at:
git://jmondi.org/linux ceu/media-tree-parm/base
with few patches for Migo-R and GR-Peach applied on top of Hans' media-tree/parm
branch.
Copying from v7 cover letter:
The 2 new patches in the series:
[11/11] has been added to silence a v4l2-compliance error, and modifies
ov7670 driver to set all fields of 'struct v4l2_mbus_format' during set_format
operation, including ycbcr_enc, quantization and xfer_func. As the patch commit
reports, this suppresses the following v4l2-compliance error:
fail: v4l2-test-formats.cpp(335): ycbcr_enc >= 0xff
v8: Did the same for ov772x
[7/11] has been required by Hans to add frame interval handling to ov772x
driver. As this is quite a big change I kept it in a separate patch to ease
review, it can eventually be squashed on [6/11] if accepted.
v8: Calculate PLL divider/multiplier in place of using static tables.
If for TW9910 video decoder the same is required (frame interval handling) I'm
in favour of moving that driver to staging as it was proposed for ov772x before
this series.
v4l2-compliance now reports a 0 error count:
Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
Hans, you asked me to run v4l2-compliance with the -f option, I cannot do
that on my tiny GR-Peach as with its limited available system memory it cannot
allocate the number of requested buffers for that test. I can try to tweak that
if necessary. I won't stress here why I cannot do that on Migo-R, long story
short, I need a special compiler with DSP support to run anything but the little
initramfs I have received for SH7722. I've been able to tweak yavta to work and
test capture and frame rate handling with it, but v4l2-compliance is much more
complex and I don't think I'll be able run it on that platform.
Below, v4l2-compliance output:
-------------------------------------------------------------------------------
v4l2-compliance SHA : 20b6624f4bb84353e690d897688fd7ac12d6a881
Driver Info:
Driver name : renesas-ceu
Card type : Renesas CEU e8210000.ceu
Bus info : platform:renesas-ceu-e8210000.c
Driver version: 4.15.0
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Compliance test for device /dev/video0 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Test input 0:
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 12 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
fail: v4l2-test-formats.cpp(1162): ret && node->has_frmintervals
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
Test input 0:
Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
-------------------------------------------------------------------------------
v7->v8:
- Calculate PLL divider/multiplier and do not use static tables
- Change RZ/A1-H to RZ/A1H (same for L) in bindings documentation
- Use rounded clock rate in Migo-R board code as SH clk_set_clk()
implementation does not perform rounding
- Set ycbcr_enc and other fields of v4l2_mbus_format for ov772x as patch
[11/11] does for ov7670
v6->v7:
- Add patch to handle ycbr_enc and other fields of v4l2_mbus_format for ov7670
- Add patch to handle frame interval for ov772x
- Rebased on Hans' media-tree/parm branch with v4l2_g/s_parm_cap
- Drop const modifier in CEU releated fields of Migo-R setup.c board file
to silence complier warnings.
v5->v6:
- Add Hans' Acked-by to most patches
- Fix a bad change in ov772x get_selection
- Add .buf_prepare callack to CEU and verify plane sizes there
- Remove VB2_USERPTR from supported io_modes in CEU driver
- Remove read() fops in CEU driver
v4->v5:
- Added Rob's and Laurent's Reviewed-by tag to DT bindings
- Change CEU driver module license to "GPL v2" to match SPDX identifier as
suggested by Philippe Ombredanne
- Make struct ceu_data static as suggested by Laurent and add his
Reviewed-by to CEU driver.
v3->v4:
- Drop generic fallback compatible string "renesas,ceu"
- Addressed Laurent's comments on [3/9]
- Fix error messages on irq get/request
- Do not leak ceudev if irq_get fails
- Make irq_mask a const field
v2->v3:
- Improved DT bindings removing standard properties (pinctrl- ones and
remote-endpoint) not specific to this driver and improved description of
compatible strings
- Remove ov772x's xlkc_rate property and set clock rate in Migo-R board file
- Made 'xclk' clock private to ov772x driver in Migo-R board file
- Change 'rstb' GPIO active output level and changed ov772x and tw9910 drivers
accordingly as suggested by Fabio
- Minor changes in CEU driver to address Laurent's comments
- Moved Migo-R setup patch to the end of the series to silence 0-day bot
- Renamed tw9910 clock to 'xti' as per video decoder manual
- Changed all SPDX identifiers to GPL-2.0 from previous GPL-2.0+
v1->v2:
- DT
-- Addressed Geert's comments and added clocks for CEU to mstp6 clock source
-- Specified supported generic video iterfaces properties in dt-bindings and
simplified example
- CEU driver
-- Re-worked interrupt handler, interrupt management, reset(*) and capture
start operation
-- Re-worked querycap/enum_input/enum_frameintervals to fix some
v4l2_compliance failures
-- Removed soc_camera legacy operations g/s_mbus_format
-- Update to new notifier implementation
-- Fixed several comments from Hans, Laurent and Sakari
- Migo-R
-- Register clocks and gpios for sensor drivers in Migo-R setup
-- Updated sensors (tw9910 and ov772x) drivers headers and drivers to close
remarks from Hans and Laurent:
--- Removed platform callbacks and handle clocks and gpios from sensor drivers
--- Remove g/s_mbus_config operations
Jacopo Mondi (11):
dt-bindings: media: Add Renesas CEU bindings
include: media: Add Renesas CEU driver interface
media: platform: Add Renesas CEU driver
ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
media: i2c: Copy ov772x soc_camera sensor driver
media: i2c: ov772x: Remove soc_camera dependencies
media: i2c: ov772x: Support frame interval handling
media: i2c: Copy tw9910 soc_camera sensor driver
media: i2c: tw9910: Remove soc_camera dependencies
arch: sh: migor: Use new renesas-ceu camera driver
media: i2c: ov7670: Fully set mbus frame fmt
.../devicetree/bindings/media/renesas,ceu.txt | 81 +
arch/arm/boot/dts/r7s72100.dtsi | 15 +-
arch/sh/boards/mach-migor/setup.c | 225 ++-
arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 2 +-
drivers/media/i2c/Kconfig | 20 +
drivers/media/i2c/Makefile | 2 +
drivers/media/i2c/ov7670.c | 4 +
drivers/media/i2c/ov772x.c | 1362 ++++++++++++++++
drivers/media/i2c/tw9910.c | 1039 ++++++++++++
drivers/media/platform/Kconfig | 9 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/renesas-ceu.c | 1661 ++++++++++++++++++++
include/media/drv-intf/renesas-ceu.h | 26 +
include/media/i2c/ov772x.h | 6 +-
include/media/i2c/tw9910.h | 9 +
15 files changed, 4331 insertions(+), 131 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/renesas,ceu.txt
create mode 100644 drivers/media/i2c/ov772x.c
create mode 100644 drivers/media/i2c/tw9910.c
create mode 100644 drivers/media/platform/renesas-ceu.c
create mode 100644 include/media/drv-intf/renesas-ceu.h
--
2.7.4
Powered by blists - more mailing lists