[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180130202913.28724-14-thierry.escande@collabora.com>
Date: Tue, 30 Jan 2018 21:28:43 +0100
From: Thierry Escande <thierry.escande@...labora.com>
To: Archit Taneja <architt@...eaurora.org>,
Inki Dae <inki.dae@...sung.com>,
Thierry Reding <thierry.reding@...il.com>,
Sandy Huang <hjc@...k-chips.com>,
Sean Paul <seanpaul@...omium.org>,
David Airlie <airlied@...ux.ie>,
Tomasz Figa <tfiga@...omium.org>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>
Cc: Haixia Shi <hshi@...omium.org>,
Ørjan Eide <orjan.eide@....com>,
Zain Wang <wzz@...k-chips.com>,
Yakir Yang <ykk@...k-chips.com>, Lin Huang <hl@...k-chips.com>,
Douglas Anderson <dianders@...omium.org>,
Mark Yao <mark.yao@...k-chips.com>,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
dri-devel@...ts.freedesktop.org
Subject: [PATCH v3 13/43] drm/bridge: analogix_dp: Move enable video into config_video()
From: Lin Huang <hl@...k-chips.com>
We need to enable video before analogix_dp_is_video_stream_on(), so
we can get the right video stream status.
Cc: 征增 王 <wzz@...k-chips.com>
Cc: Stéphane Marchesin <marcheu@...omium.org>
Signed-off-by: Lin Huang <hl@...k-chips.com>
Signed-off-by: Sean Paul <seanpaul@...omium.org>
Signed-off-by: Thierry Escande <thierry.escande@...labora.com>
Reviewed-by: Andrzej Hajda <a.hajda@...sung.com>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 49a05eac41c1..8ef9e31c6713 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -820,11 +820,10 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
break;
if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "Timeout of video streamclk ok\n");
+ dev_err(dp->dev, "Timeout of slave video streamclk ok\n");
return -ETIMEDOUT;
}
-
- usleep_range(1, 2);
+ usleep_range(1000, 1001);
}
/* Set to use the register calculated M/N video */
@@ -839,6 +838,9 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
/* Configure video slave mode */
analogix_dp_enable_video_master(dp, 0);
+ /* Enable video */
+ analogix_dp_start_video(dp);
+
timeout_loop = 0;
for (;;) {
@@ -952,9 +954,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
DRM_ERROR("failed to enable the panel\n");
}
- /* Enable video */
- analogix_dp_start_video(dp);
-
dp->psr_enable = analogix_dp_detect_sink_psr(dp);
if (dp->psr_enable)
analogix_dp_enable_sink_psr(dp);
--
2.14.1
Powered by blists - more mailing lists