[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180131180945.18025-16-jbrunet@baylibre.com>
Date: Wed, 31 Jan 2018 19:09:41 +0100
From: Jerome Brunet <jbrunet@...libre.com>
To: Neil Armstrong <narmstrong@...libre.com>,
Kevin Hilman <khilman@...libre.com>
Cc: Jerome Brunet <jbrunet@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Michael Turquette <mturquette@...libre.com>,
Carlo Caione <carlo@...one.org>,
linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 15/19] clk: meson: migrate plls clocks to clk_regmap
Rework meson pll driver to use clk_regmap and move meson8b, gxbb and
axg's clock using meson_clk_pll to clk_regmap.
This rework is not just about clk_regmap, there a serious clean-up of
the driver code:
* Add lock and reset field: Previously inferred from the n field.
* Simplify the reset logic: Code seemed to apply reset differently but
in fact it always the same -> assert reset, apply params, de-assert
reset. The 2 lock checking loops have been kept for now, as they
seem to be necessary.
* Do the sequence of init register pokes only at .init() instead of in
.set_rate(). Redoing the init on every set_rate() is not necessary
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
drivers/clk/meson/axg.c | 213 +++++++++++-----------
drivers/clk/meson/clk-pll.c | 243 ++++++++++---------------
drivers/clk/meson/clkc.h | 36 +---
drivers/clk/meson/gxbb.c | 424 +++++++++++++++++++++++++-------------------
drivers/clk/meson/meson8b.c | 149 +++++++++-------
5 files changed, 535 insertions(+), 530 deletions(-)
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index 5c753be71b45..df1f15bfd058 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -22,28 +22,39 @@
static DEFINE_SPINLOCK(meson_clk_lock);
-static struct meson_clk_pll axg_fixed_pll = {
- .m = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 16,
- .width = 2,
- },
- .frac = {
- .reg_off = HHI_MPLL_CNTL2,
- .shift = 0,
- .width = 12,
- },
- .lock = &meson_clk_lock,
+static struct clk_regmap axg_fixed_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .frac = {
+ .reg_off = HHI_MPLL_CNTL2,
+ .shift = 0,
+ .width = 12,
+ },
+ .l = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ },
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -52,23 +63,34 @@ static struct meson_clk_pll axg_fixed_pll = {
},
};
-static struct meson_clk_pll axg_sys_pll = {
- .m = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 10,
- .width = 2,
+static struct clk_regmap axg_sys_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
},
- .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -169,40 +191,47 @@ static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
{ /* sentinel */ },
};
-static struct pll_params_table axg_gp0_params_table[] = {
- PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
- PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
- PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
- PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
- PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
- PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+const struct reg_sequence axg_gp0_init_regs[] = {
+ { .reg = HHI_GP0_PLL_CNTL, .def = 0x40010250 },
+ { .reg = HHI_GP0_PLL_CNTL1, .def = 0xc084a000 },
+ { .reg = HHI_GP0_PLL_CNTL2, .def = 0xb75020be },
+ { .reg = HHI_GP0_PLL_CNTL3, .def = 0x0a59a288 },
+ { .reg = HHI_GP0_PLL_CNTL4, .def = 0xc000004d },
+ { .reg = HHI_GP0_PLL_CNTL5, .def = 0x00078000 },
};
-static struct meson_clk_pll axg_gp0_pll = {
- .m = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 16,
- .width = 2,
- },
- .params = {
- .params_table = axg_gp0_params_table,
- .params_count = ARRAY_SIZE(axg_gp0_params_table),
- .no_init_reset = true,
- .reset_lock_loop = true,
- },
- .rate_table = axg_gp0_pll_rate_table,
- .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
- .lock = &meson_clk_lock,
+static struct clk_regmap axg_gp0_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ .table = axg_gp0_pll_rate_table,
+ .init_regs = axg_gp0_init_regs,
+ .init_count = ARRAY_SIZE(axg_gp0_init_regs),
+ .flags = CLK_MESON_PLL_LOCK_LOOP_RST,
+ },
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -698,14 +727,7 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = {
.num = NR_CLKS,
};
-/* Convenience tables to populate base addresses in .probe */
-
-static struct meson_clk_pll *const axg_clk_plls[] = {
- &axg_fixed_pll,
- &axg_sys_pll,
- &axg_gp0_pll,
-};
-
+/* Convenience table to populate regmap in .probe */
static struct clk_regmap *const axg_clk_regmaps[] = {
&axg_clk81,
&axg_ddr,
@@ -764,22 +786,13 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
&axg_mpll1,
&axg_mpll2,
&axg_mpll3,
-};
-
-struct clkc_data {
- struct meson_clk_pll *const *clk_plls;
- unsigned int clk_plls_count;
- struct clk_hw_onecell_data *hw_onecell_data;
-};
-
-static const struct clkc_data axg_clkc_data = {
- .clk_plls = axg_clk_plls,
- .clk_plls_count = ARRAY_SIZE(axg_clk_plls),
- .hw_onecell_data = &axg_hw_onecell_data,
+ &axg_fixed_pll,
+ &axg_sys_pll,
+ &axg_gp0_pll,
};
static const struct of_device_id clkc_match_table[] = {
- { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+ { .compatible = "amlogic,axg-clkc" },
{}
};
@@ -792,16 +805,11 @@ static const struct regmap_config clkc_regmap_config = {
static int axg_clkc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- const struct clkc_data *clkc_data;
struct resource *res;
void __iomem *clk_base;
struct regmap *map;
int ret, i;
- clkc_data = of_device_get_match_data(dev);
- if (!clkc_data)
- return -EINVAL;
-
/* Generic clocks and PLLs */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -817,21 +825,16 @@ static int axg_clkc_probe(struct platform_device *pdev)
if (IS_ERR(map))
return PTR_ERR(map);
- /* Populate base address for PLLs */
- for (i = 0; i < clkc_data->clk_plls_count; i++)
- clkc_data->clk_plls[i]->base = clk_base;
-
/* Populate regmap for the regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(axg_clk_regmaps); i++)
axg_clk_regmaps[i]->map = map;
- for (i = 0; i < clkc_data->hw_onecell_data->num; i++) {
+ for (i = 0; i < axg_hw_onecell_data.num; i++) {
/* array might be sparse */
- if (!clkc_data->hw_onecell_data->hws[i])
+ if (!axg_hw_onecell_data.hws[i])
continue;
- ret = devm_clk_hw_register(dev,
- clkc_data->hw_onecell_data->hws[i]);
+ ret = devm_clk_hw_register(dev, axg_hw_onecell_data.hws[i]);
if (ret) {
dev_err(dev, "Clock registration failed\n");
return ret;
@@ -839,7 +842,7 @@ static int axg_clkc_probe(struct platform_device *pdev)
}
return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
- clkc_data->hw_onecell_data);
+ &axg_hw_onecell_data);
}
static struct platform_driver axg_driver = {
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 218c769c6d50..f3d909719111 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -42,52 +42,36 @@
#include "clkc.h"
-#define MESON_PLL_RESET BIT(29)
-#define MESON_PLL_LOCK BIT(31)
-
-#define to_meson_clk_pll(_hw) container_of(_hw, struct meson_clk_pll, hw)
+static inline struct meson_clk_pll_data *
+meson_clk_pll_data(struct clk_regmap *clk)
+{
+ return (struct meson_clk_pll_data *)clk->data;
+}
static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
- struct meson_clk_pll *pll = to_meson_clk_pll(hw);
- struct parm *p;
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
u64 rate;
u16 n, m, frac = 0, od, od2 = 0, od3 = 0;
- u32 reg;
-
- p = &pll->n;
- reg = readl(pll->base + p->reg_off);
- n = PARM_GET(p->width, p->shift, reg);
- p = &pll->m;
- reg = readl(pll->base + p->reg_off);
- m = PARM_GET(p->width, p->shift, reg);
+ n = meson_parm_read(clk->map, &pll->n);
+ m = meson_parm_read(clk->map, &pll->m);
+ od = meson_parm_read(clk->map, &pll->od);
- p = &pll->od;
- reg = readl(pll->base + p->reg_off);
- od = PARM_GET(p->width, p->shift, reg);
+ if (MESON_PARM_APPLICABLE(&pll->od2))
+ od2 = meson_parm_read(clk->map, &pll->od2);
- p = &pll->od2;
- if (p->width) {
- reg = readl(pll->base + p->reg_off);
- od2 = PARM_GET(p->width, p->shift, reg);
- }
-
- p = &pll->od3;
- if (p->width) {
- reg = readl(pll->base + p->reg_off);
- od3 = PARM_GET(p->width, p->shift, reg);
- }
+ if (MESON_PARM_APPLICABLE(&pll->od3))
+ od3 = meson_parm_read(clk->map, &pll->od3);
rate = (u64)m * parent_rate;
- p = &pll->frac;
- if (p->width) {
- reg = readl(pll->base + p->reg_off);
- frac = PARM_GET(p->width, p->shift, reg);
+ if (MESON_PARM_APPLICABLE(&pll->frac)) {
+ frac = meson_parm_read(clk->map, &pll->frac);
- rate += mul_u64_u32_shr(parent_rate, frac, p->width);
+ rate += mul_u64_u32_shr(parent_rate, frac, pll->frac.width);
}
return div_u64(rate, n) >> od >> od2 >> od3;
@@ -96,177 +80,136 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
static long meson_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
- struct meson_clk_pll *pll = to_meson_clk_pll(hw);
- const struct pll_rate_table *rate_table = pll->rate_table;
- int i;
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
+ const struct pll_rate_table *pllt;
/*
* if the table is missing, just return the current rate
* since we don't have the other available frequencies
*/
- if (!rate_table)
+ if (!pll->table)
return meson_clk_pll_recalc_rate(hw, *parent_rate);
- for (i = 0; i < pll->rate_count; i++) {
- if (rate <= rate_table[i].rate)
- return rate_table[i].rate;
+ for (pllt = pll->table; pllt->rate; pllt++) {
+ if (rate <= pllt->rate)
+ return pllt->rate;
}
/* else return the smallest value */
- return rate_table[0].rate;
+ return pll->table[0].rate;
}
-static const struct pll_rate_table *meson_clk_get_pll_settings(struct meson_clk_pll *pll,
- unsigned long rate)
+static const struct pll_rate_table *
+meson_clk_get_pll_settings(const struct pll_rate_table *table,
+ unsigned long rate)
{
- const struct pll_rate_table *rate_table = pll->rate_table;
- int i;
+ const struct pll_rate_table *pllt;
- if (!rate_table)
+ if (!table)
return NULL;
- for (i = 0; i < pll->rate_count; i++) {
- if (rate == rate_table[i].rate)
- return &rate_table[i];
+ for (pllt = table; pllt->rate; pllt++) {
+ if (rate == pllt->rate)
+ return pllt;
}
+
return NULL;
}
-/* Specific wait loop for GXL/GXM GP0 PLL */
-static int meson_clk_pll_wait_lock_reset(struct meson_clk_pll *pll,
- struct parm *p_n)
+static int meson_clk_pll_wait_lock(struct clk_hw *hw)
{
- int delay = 100;
- u32 reg;
-
- while (delay > 0) {
- reg = readl(pll->base + p_n->reg_off);
- writel(reg | MESON_PLL_RESET, pll->base + p_n->reg_off);
- udelay(10);
- writel(reg & ~MESON_PLL_RESET, pll->base + p_n->reg_off);
-
- /* This delay comes from AMLogic tree clk-gp0-gxl driver */
- mdelay(1);
-
- reg = readl(pll->base + p_n->reg_off);
- if (reg & MESON_PLL_LOCK)
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
+ int delay = pll->flags & CLK_MESON_PLL_LOCK_LOOP_RST ?
+ 100 : 24000000;
+
+ do {
+ /* Specific wait loop for GXL/GXM GP0 PLL */
+ if (pll->flags & CLK_MESON_PLL_LOCK_LOOP_RST) {
+ /* Procedure taken from the vendor kernel */
+ meson_parm_write(clk->map, &pll->rst, 1);
+ udelay(10);
+ meson_parm_write(clk->map, &pll->rst, 0);
+ mdelay(1);
+ }
+
+ /* Is the clock locked now ? */
+ if (meson_parm_read(clk->map, &pll->l))
return 0;
- delay--;
- }
- return -ETIMEDOUT;
-}
-static int meson_clk_pll_wait_lock(struct meson_clk_pll *pll,
- struct parm *p_n)
-{
- int delay = 24000000;
- u32 reg;
-
- while (delay > 0) {
- reg = readl(pll->base + p_n->reg_off);
-
- if (reg & MESON_PLL_LOCK)
- return 0;
delay--;
- }
+ } while (delay > 0);
+
return -ETIMEDOUT;
}
-static void meson_clk_pll_init_params(struct meson_clk_pll *pll)
+static void meson_clk_pll_init(struct clk_hw *hw)
{
- int i;
-
- for (i = 0 ; i < pll->params.params_count ; ++i)
- writel(pll->params.params_table[i].value,
- pll->base + pll->params.params_table[i].reg_off);
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
+
+ if (pll->init_count) {
+ meson_parm_write(clk->map, &pll->rst, 1);
+ regmap_multi_reg_write(clk->map, pll->init_regs,
+ pll->init_count);
+ meson_parm_write(clk->map, &pll->rst, 0);
+ }
}
static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
- struct meson_clk_pll *pll = to_meson_clk_pll(hw);
- struct parm *p;
- const struct pll_rate_table *rate_set;
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
+ const struct pll_rate_table *pllt;
unsigned long old_rate;
- int ret = 0;
- u32 reg;
if (parent_rate == 0 || rate == 0)
return -EINVAL;
old_rate = rate;
- rate_set = meson_clk_get_pll_settings(pll, rate);
- if (!rate_set)
+ pllt = meson_clk_get_pll_settings(pll->table, rate);
+ if (!pllt)
return -EINVAL;
- /* Initialize the PLL in a clean state if specified */
- if (pll->params.params_count)
- meson_clk_pll_init_params(pll);
-
- /* PLL reset */
- p = &pll->n;
- reg = readl(pll->base + p->reg_off);
- /* If no_init_reset is provided, avoid resetting at this point */
- if (!pll->params.no_init_reset)
- writel(reg | MESON_PLL_RESET, pll->base + p->reg_off);
-
- reg = PARM_SET(p->width, p->shift, reg, rate_set->n);
- writel(reg, pll->base + p->reg_off);
-
- p = &pll->m;
- reg = readl(pll->base + p->reg_off);
- reg = PARM_SET(p->width, p->shift, reg, rate_set->m);
- writel(reg, pll->base + p->reg_off);
-
- p = &pll->od;
- reg = readl(pll->base + p->reg_off);
- reg = PARM_SET(p->width, p->shift, reg, rate_set->od);
- writel(reg, pll->base + p->reg_off);
-
- p = &pll->od2;
- if (p->width) {
- reg = readl(pll->base + p->reg_off);
- reg = PARM_SET(p->width, p->shift, reg, rate_set->od2);
- writel(reg, pll->base + p->reg_off);
- }
+ /* Put the pll in reset to write the params */
+ meson_parm_write(clk->map, &pll->rst, 1);
- p = &pll->od3;
- if (p->width) {
- reg = readl(pll->base + p->reg_off);
- reg = PARM_SET(p->width, p->shift, reg, rate_set->od3);
- writel(reg, pll->base + p->reg_off);
- }
+ meson_parm_write(clk->map, &pll->n, pllt->n);
+ meson_parm_write(clk->map, &pll->m, pllt->m);
+ meson_parm_write(clk->map, &pll->od, pllt->od);
- p = &pll->frac;
- if (p->width) {
- reg = readl(pll->base + p->reg_off);
- reg = PARM_SET(p->width, p->shift, reg, rate_set->frac);
- writel(reg, pll->base + p->reg_off);
- }
+ if (MESON_PARM_APPLICABLE(&pll->od2))
+ meson_parm_write(clk->map, &pll->od2, pllt->od2);
- p = &pll->n;
- /* If clear_reset_for_lock is provided, remove the reset bit here */
- if (pll->params.clear_reset_for_lock) {
- reg = readl(pll->base + p->reg_off);
- writel(reg & ~MESON_PLL_RESET, pll->base + p->reg_off);
- }
+ if (MESON_PARM_APPLICABLE(&pll->od3))
+ meson_parm_write(clk->map, &pll->od3, pllt->od3);
+
+ if (MESON_PARM_APPLICABLE(&pll->frac))
+ meson_parm_write(clk->map, &pll->frac, pllt->frac);
+
+ /* make sure the reset is cleared at this point */
+ meson_parm_write(clk->map, &pll->rst, 0);
- /* If reset_lock_loop, use a special loop including resetting */
- if (pll->params.reset_lock_loop)
- ret = meson_clk_pll_wait_lock_reset(pll, p);
- else
- ret = meson_clk_pll_wait_lock(pll, p);
- if (ret) {
+ if (meson_clk_pll_wait_lock(hw)) {
pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
__func__, old_rate);
+ /*
+ * FIXME: Do we really need/want this HACK ?
+ * It looks unsafe. what happens if the clock gets into a
+ * broken state and we can't lock back on the old_rate ? Looks
+ * like an infinite recursion is possible
+ */
meson_clk_pll_set_rate(hw, old_rate, parent_rate);
}
- return ret;
+ return 0;
}
const struct clk_ops meson_clk_pll_ops = {
+ .init = meson_clk_pll_init,
.recalc_rate = meson_clk_pll_recalc_rate,
.round_rate = meson_clk_pll_round_rate,
.set_rate = meson_clk_pll_set_rate,
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index a4a526cbca4c..f0d70eaffcf3 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -82,41 +82,21 @@ struct pll_rate_table {
.frac = (_frac), \
} \
-struct pll_params_table {
- unsigned int reg_off;
- unsigned int value;
-};
-
-#define PLL_PARAM(_reg, _val) \
- { \
- .reg_off = (_reg), \
- .value = (_val), \
- }
-
-struct pll_setup_params {
- struct pll_params_table *params_table;
- unsigned int params_count;
- /* Workaround for GP0, do not reset before configuring */
- bool no_init_reset;
- /* Workaround for GP0, unreset right before checking for lock */
- bool clear_reset_for_lock;
- /* Workaround for GXL GP0, reset in the lock checking loop */
- bool reset_lock_loop;
-};
+#define CLK_MESON_PLL_LOCK_LOOP_RST BIT(0)
-struct meson_clk_pll {
- struct clk_hw hw;
- void __iomem *base;
+struct meson_clk_pll_data {
struct parm m;
struct parm n;
struct parm frac;
struct parm od;
struct parm od2;
struct parm od3;
- const struct pll_setup_params params;
- const struct pll_rate_table *rate_table;
- unsigned int rate_count;
- spinlock_t *lock;
+ struct parm l;
+ struct parm rst;
+ const struct reg_sequence *init_regs;
+ unsigned int init_count;
+ const struct pll_rate_table *table;
+ u8 flags;
};
#define to_meson_clk_pll(_hw) container_of(_hw, struct meson_clk_pll, hw)
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 196557f11608..49f5716ce8b6 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -188,28 +188,39 @@ static const struct pll_rate_table gxl_gp0_pll_rate_table[] = {
{ /* sentinel */ },
};
-static struct meson_clk_pll gxbb_fixed_pll = {
- .m = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 16,
- .width = 2,
- },
- .frac = {
- .reg_off = HHI_MPLL_CNTL2,
- .shift = 0,
- .width = 12,
- },
- .lock = &meson_clk_lock,
+static struct clk_regmap gxbb_fixed_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .frac = {
+ .reg_off = HHI_MPLL_CNTL2,
+ .shift = 0,
+ .width = 12,
+ },
+ .l = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ },
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -230,38 +241,49 @@ static struct clk_fixed_factor gxbb_hdmi_pll_pre_mult = {
},
};
-static struct meson_clk_pll gxbb_hdmi_pll = {
- .m = {
- .reg_off = HHI_HDMI_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_HDMI_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .frac = {
- .reg_off = HHI_HDMI_PLL_CNTL2,
- .shift = 0,
- .width = 12,
- },
- .od = {
- .reg_off = HHI_HDMI_PLL_CNTL2,
- .shift = 16,
- .width = 2,
- },
- .od2 = {
- .reg_off = HHI_HDMI_PLL_CNTL2,
- .shift = 22,
- .width = 2,
- },
- .od3 = {
- .reg_off = HHI_HDMI_PLL_CNTL2,
- .shift = 18,
- .width = 2,
+static struct clk_regmap gxbb_hdmi_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = HHI_HDMI_PLL_CNTL2,
+ .shift = 0,
+ .width = 12,
+ },
+ .od = {
+ .reg_off = HHI_HDMI_PLL_CNTL2,
+ .shift = 16,
+ .width = 2,
+ },
+ .od2 = {
+ .reg_off = HHI_HDMI_PLL_CNTL2,
+ .shift = 22,
+ .width = 2,
+ },
+ .od3 = {
+ .reg_off = HHI_HDMI_PLL_CNTL2,
+ .shift = 18,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 28,
+ .width = 1,
+ },
},
- .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "hdmi_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -271,43 +293,55 @@ static struct meson_clk_pll gxbb_hdmi_pll = {
},
};
-static struct meson_clk_pll gxl_hdmi_pll = {
- .m = {
- .reg_off = HHI_HDMI_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_HDMI_PLL_CNTL,
- .shift = 9,
- .width = 5,
+static struct clk_regmap gxl_hdmi_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .frac = {
+ /*
+ * On gxl, there is a register shift due to
+ * HHI_HDMI_PLL_CNTL1 which does not exist on gxbb,
+ * so we compute the register offset based on the PLL
+ * base to get it right
+ */
+ .reg_off = HHI_HDMI_PLL_CNTL + 4,
+ .shift = 0,
+ .width = 12,
+ },
+ .od = {
+ .reg_off = HHI_HDMI_PLL_CNTL + 8,
+ .shift = 21,
+ .width = 2,
+ },
+ .od2 = {
+ .reg_off = HHI_HDMI_PLL_CNTL + 8,
+ .shift = 23,
+ .width = 2,
+ },
+ .od3 = {
+ .reg_off = HHI_HDMI_PLL_CNTL + 8,
+ .shift = 19,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_HDMI_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
},
- .frac = {
- /*
- * On gxl, there is a register shift due to HHI_HDMI_PLL_CNTL1
- * which does not exist on gxbb, so we compute the register
- * offset based on the PLL base to get it right
- */
- .reg_off = HHI_HDMI_PLL_CNTL + 4,
- .shift = 0,
- .width = 12,
- },
- .od = {
- .reg_off = HHI_HDMI_PLL_CNTL + 8,
- .shift = 21,
- .width = 2,
- },
- .od2 = {
- .reg_off = HHI_HDMI_PLL_CNTL + 8,
- .shift = 23,
- .width = 2,
- },
- .od3 = {
- .reg_off = HHI_HDMI_PLL_CNTL + 8,
- .shift = 19,
- .width = 2,
- },
- .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "hdmi_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -317,23 +351,34 @@ static struct meson_clk_pll gxl_hdmi_pll = {
},
};
-static struct meson_clk_pll gxbb_sys_pll = {
- .m = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 10,
- .width = 2,
+static struct clk_regmap gxbb_sys_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
},
- .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -343,38 +388,44 @@ static struct meson_clk_pll gxbb_sys_pll = {
},
};
-struct pll_params_table gxbb_gp0_params_table[] = {
- PLL_PARAM(HHI_GP0_PLL_CNTL, 0x6a000228),
- PLL_PARAM(HHI_GP0_PLL_CNTL2, 0x69c80000),
- PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a5590c4),
- PLL_PARAM(HHI_GP0_PLL_CNTL4, 0x0000500d),
+const struct reg_sequence gxbb_gp0_init_regs[] = {
+ { .reg = HHI_GP0_PLL_CNTL, .def = 0x6a000228 },
+ { .reg = HHI_GP0_PLL_CNTL2, .def = 0x69c80000 },
+ { .reg = HHI_GP0_PLL_CNTL3, .def = 0x0a5590c4 },
+ { .reg = HHI_GP0_PLL_CNTL4, .def = 0x0000500d },
};
-static struct meson_clk_pll gxbb_gp0_pll = {
- .m = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 16,
- .width = 2,
- },
- .params = {
- .params_table = gxbb_gp0_params_table,
- .params_count = ARRAY_SIZE(gxbb_gp0_params_table),
- .no_init_reset = true,
- .clear_reset_for_lock = true,
+static struct clk_regmap gxbb_gp0_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ .table = gxbb_gp0_pll_rate_table,
+ .init_regs = gxbb_gp0_init_regs,
+ .init_count = ARRAY_SIZE(gxbb_gp0_init_regs),
},
- .rate_table = gxbb_gp0_pll_rate_table,
- .rate_count = ARRAY_SIZE(gxbb_gp0_pll_rate_table),
- .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -384,40 +435,47 @@ static struct meson_clk_pll gxbb_gp0_pll = {
},
};
-struct pll_params_table gxl_gp0_params_table[] = {
- PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
- PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
- PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
- PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
- PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
- PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+const struct reg_sequence gxl_gp0_init_regs[] = {
+ { .reg = HHI_GP0_PLL_CNTL, .def = 0x40010250 },
+ { .reg = HHI_GP0_PLL_CNTL1, .def = 0xc084a000 },
+ { .reg = HHI_GP0_PLL_CNTL2, .def = 0xb75020be },
+ { .reg = HHI_GP0_PLL_CNTL3, .def = 0x0a59a288 },
+ { .reg = HHI_GP0_PLL_CNTL4, .def = 0xc000004d },
+ { .reg = HHI_GP0_PLL_CNTL5, .def = 0x00078000 },
};
-static struct meson_clk_pll gxl_gp0_pll = {
- .m = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_GP0_PLL_CNTL,
- .shift = 16,
- .width = 2,
- },
- .params = {
- .params_table = gxl_gp0_params_table,
- .params_count = ARRAY_SIZE(gxl_gp0_params_table),
- .no_init_reset = true,
- .reset_lock_loop = true,
+static struct clk_regmap gxl_gp0_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ .table = gxl_gp0_pll_rate_table,
+ .init_regs = gxl_gp0_init_regs,
+ .init_count = ARRAY_SIZE(gxl_gp0_init_regs),
+ .flags = CLK_MESON_PLL_LOCK_LOOP_RST,
},
- .rate_table = gxl_gp0_pll_rate_table,
- .rate_count = ARRAY_SIZE(gxl_gp0_pll_rate_table),
- .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -1762,20 +1820,14 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
.num = NR_CLKS,
};
-/* Convenience tables to populate base addresses in .probe */
-
-static struct meson_clk_pll *const gxbb_clk_plls[] = {
- &gxbb_fixed_pll,
- &gxbb_hdmi_pll,
- &gxbb_sys_pll,
+static struct clk_regmap *const gxbb_clk_regmaps[] = {
&gxbb_gp0_pll,
+ &gxbb_hdmi_pll,
};
-static struct meson_clk_pll *const gxl_clk_plls[] = {
- &gxbb_fixed_pll,
- &gxl_hdmi_pll,
- &gxbb_sys_pll,
+static struct clk_regmap *const gxl_clk_regmaps[] = {
&gxl_gp0_pll,
+ &gxl_hdmi_pll,
};
static struct clk_regmap *const gx_clk_regmaps[] = {
@@ -1910,23 +1962,25 @@ static struct clk_regmap *const gx_clk_regmaps[] = {
&gxbb_mpll1,
&gxbb_mpll2,
&gxbb_cts_amclk_div,
+ &gxbb_fixed_pll,
+ &gxbb_sys_pll,
};
struct clkc_data {
- struct meson_clk_pll *const *clk_plls;
- unsigned int clk_plls_count;
+ struct clk_regmap *const *regmap_clks;
+ unsigned int regmap_clks_count;
struct clk_hw_onecell_data *hw_onecell_data;
};
static const struct clkc_data gxbb_clkc_data = {
- .clk_plls = gxbb_clk_plls,
- .clk_plls_count = ARRAY_SIZE(gxbb_clk_plls),
+ .regmap_clks = gxbb_clk_regmaps,
+ .regmap_clks_count = ARRAY_SIZE(gxbb_clk_regmaps),
.hw_onecell_data = &gxbb_hw_onecell_data,
};
static const struct clkc_data gxl_clkc_data = {
- .clk_plls = gxl_clk_plls,
- .clk_plls_count = ARRAY_SIZE(gxl_clk_plls),
+ .regmap_clks = gxl_clk_regmaps,
+ .regmap_clks_count = ARRAY_SIZE(gxl_clk_regmaps),
.hw_onecell_data = &gxl_hw_onecell_data,
};
@@ -1969,14 +2023,14 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
if (IS_ERR(map))
return PTR_ERR(map);
- /* Populate base address for PLLs */
- for (i = 0; i < clkc_data->clk_plls_count; i++)
- clkc_data->clk_plls[i]->base = clk_base;
-
/* Populate regmap for the common regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(gx_clk_regmaps); i++)
gx_clk_regmaps[i]->map = map;
+ /* Populate regmap for soc specific clocks */
+ for (i = 0; i < clkc_data->regmap_clks_count; i++)
+ clkc_data->regmap_clks[i]->map = map;
+
/* Register all clks */
for (i = 0; i < clkc_data->hw_onecell_data->num; i++) {
/* array might be sparse */
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 4bb51c8f3102..4fd8253c54bb 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -122,23 +122,34 @@ static struct clk_fixed_rate meson8b_xtal = {
},
};
-static struct meson_clk_pll meson8b_fixed_pll = {
- .m = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_MPLL_CNTL,
- .shift = 16,
- .width = 2,
- },
- .lock = &meson_clk_lock,
+static struct clk_regmap meson8b_fixed_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ },
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -148,23 +159,34 @@ static struct meson_clk_pll meson8b_fixed_pll = {
},
};
-static struct meson_clk_pll meson8b_vid_pll = {
- .m = {
- .reg_off = HHI_VID_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_VID_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_VID_PLL_CNTL,
- .shift = 16,
- .width = 2,
+static struct clk_regmap meson8b_vid_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_VID_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_VID_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_VID_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_VID_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_VID_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
},
- .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vid_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -174,25 +196,35 @@ static struct meson_clk_pll meson8b_vid_pll = {
},
};
-static struct meson_clk_pll meson8b_sys_pll = {
- .m = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 0,
- .width = 9,
- },
- .n = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 9,
- .width = 5,
- },
- .od = {
- .reg_off = HHI_SYS_PLL_CNTL,
- .shift = 16,
- .width = 2,
- },
- .rate_table = sys_pll_rate_table,
- .rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &meson_clk_lock,
+static struct clk_regmap meson8b_sys_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .l = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 29,
+ .width = 1,
+ },
+ .table = sys_pll_rate_table,
+ },
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ops,
@@ -613,12 +645,6 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = {
.num = CLK_NR_CLKS,
};
-static struct meson_clk_pll *const meson8b_clk_plls[] = {
- &meson8b_fixed_pll,
- &meson8b_vid_pll,
- &meson8b_sys_pll,
-};
-
static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_clk81,
&meson8b_ddr,
@@ -703,6 +729,9 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = {
&meson8b_mpll0,
&meson8b_mpll1,
&meson8b_mpll2,
+ &meson8b_fixed_pll,
+ &meson8b_vid_pll,
+ &meson8b_sys_pll,
};
static const struct meson8b_clk_reset_line {
@@ -825,10 +854,6 @@ static int meson8b_clkc_probe(struct platform_device *pdev)
if (IS_ERR(map))
return PTR_ERR(map);
- /* Populate base address for PLLs */
- for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
- meson8b_clk_plls[i]->base = clk_base;
-
/* Populate the base address for CPU clk */
meson8b_cpu_clk.base = clk_base;
--
2.14.3
Powered by blists - more mailing lists