[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <6581962f-3552-2891-e6b3-b2f7c0018c93@samsung.com>
Date: Thu, 01 Feb 2018 09:19:39 +0100
From: Andrzej Hajda <a.hajda@...sung.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: "open list:DESIGNWARE USB3 DRD IP DRIVER" <linux-usb@...r.kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Inki Dae <inki.dae@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: exynos: add OF graph between USB-PHY
and MUIC
On 01.02.2018 08:50, Krzysztof Kozlowski wrote:
> On Wed, Jan 31, 2018 at 4:57 PM, Andrzej Hajda <a.hajda@...sung.com> wrote:
>> OF graph describes USB data lanes between USB-PHY and respective MUIC.
>> Since graph is present and DWC driver can use it to get extcon, obsolete
>> extcon property can be removed.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@...sung.com>
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 18 +++++++++++++++++-
>> 1 file changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> index 427ff861b441..b20b42659206 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> @@ -828,6 +828,17 @@
>> };
>> };
>> };
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> + muic_to_usb: endpoint {
>> + remote-endpoint = <&usb_to_muic>;
>> + };
>> + };
>> };
>> };
>>
>> @@ -1242,12 +1253,17 @@
>>
>> &usbdrd_dwc3 {
>> dr_mode = "otg";
>> - extcon = <&muic>;
> Look ok for me.
>
> Does this depend on #1 patch for DWC?
Yes, it depends. #1 adds code to find extcon using graph, without it
dwc3 won't be able to work in dual-role mode.
Alternatively, I could split this patch into two parts:
2a. adding graph bindings.
2b. removing extcon property.
In such case only 2b depends on #1.
Regards
Andrzej
>
> Best regards,
> Krzysztof
>
>
>
Powered by blists - more mailing lists