| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180201160553.GL7637@saruman>
Date: Thu, 1 Feb 2018 16:05:54 +0000
From: James Hogan <jhogan@...nel.org>
To: Aleksandar Markovic <aleksandar.markovic@...rk.com>
Cc: linux-mips@...ux-mips.org, Miodrag Dinic <miodrag.dinic@...s.com>,
Goran Ferenc <goran.ferenc@...s.com>,
Aleksandar Markovic <aleksandar.markovic@...s.com>,
"David S. Miller" <davem@...emloft.net>,
Douglas Leung <douglas.leung@...s.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Paul Burton <paul.burton@...s.com>,
Petar Jovanovic <petar.jovanovic@...s.com>,
Raghu Gandham <raghu.gandham@...s.com>,
Ralf Baechle <ralf@...ux-mips.org>,
Randy Dunlap <rdunlap@...radead.org>
Subject: Re: [PATCH v12 3/3] MIPS: ranchu: Add Ranchu as a new generic-based
board
On Fri, Dec 29, 2017 at 04:41:47PM +0100, Aleksandar Markovic wrote:
> From: Miodrag Dinic <miodrag.dinic@...s.com>
>
> Provide amendments to the MIPS generic platform framework so that
> the new generic-based board Ranchu can be chosen to be built.
>
> The Ranchu board is intended to be used by Android emulator. The name
> "Ranchu" originates from Android development community. "Goldfish" and
> "Ranchu" are terms used for two generations of virtual boards used by
> Android emulator. The name "Ranchu" is a newer one among the two, and
> this patch deals with Ranchu. However, for historical reasons, some
> devices/drivers still contain the name "Goldfish".
>
> MIPS Ranchu machine includes a number of Goldfish devices. The support
> for Virtio devices is also included. Ranchu board supports up to 16
> Virtio devices which can be attached using Virtio MMIO Bus. This is
> summarized in the following picture:
>
> ABUS
> ||----MIPS CPU
> || | IRQs
> ||----Goldfish PIC------------(32)--------
> || | | | | | | | | |
> ||----Goldfish TTY------ | | | | | | | |
> || | | | | | | | |
> ||----Goldfish RTC-------- | | | | | | |
> || | | | | | | |
> ||----Goldfish FB----------- | | | | | |
> || | | | | | |
> ||----Goldfish Events--------- | | | | |
> || | | | | |
> ||----Goldfish Audio------------ | | | |
> || | | | |
> ||----Goldfish Battery------------ | | |
> || | | |
> ||----Android PIPE------------------ | |
> || | |
> ||----Virtio MMIO Bus | |
> || | | | | |
> || | | (virtio-block)--------- |
> || (16) | |
> || | (virtio-net)------------------
>
> Device Tree is created on the QEMU side based on the information about
> devices IO map and IRQ numbers. Kernel will load this DTB using UHI
> boot protocol DTB handover mode.
>
> Signed-off-by: Miodrag Dinic <miodrag.dinic@...s.com>
> Signed-off-by: Goran Ferenc <goran.ferenc@...s.com>
> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@...s.com>
> Reviewed-by: James Hogan <jhogan@...nel.org>
Applied to my 4.16 branch,
Thanks
James
> ---
> MAINTAINERS | 7 ++
> arch/mips/configs/generic/board-ranchu.config | 30 +++++++++
> arch/mips/generic/Kconfig | 10 +++
> arch/mips/generic/Makefile | 1 +
> arch/mips/generic/board-ranchu.c | 92 +++++++++++++++++++++++++++
> 5 files changed, 140 insertions(+)
> create mode 100644 arch/mips/configs/generic/board-ranchu.config
> create mode 100644 arch/mips/generic/board-ranchu.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e163873..95679c4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11442,6 +11442,13 @@ S: Maintained
> F: Documentation/blockdev/ramdisk.txt
> F: drivers/block/brd.c
>
> +RANCHU VIRTUAL BOARD FOR MIPS
> +M: Miodrag Dinic <miodrag.dinic@...s.com>
> +L: linux-mips@...ux-mips.org
> +S: Supported
> +F: arch/mips/generic/board-ranchu.c
> +F: arch/mips/configs/generic/board-ranchu.config
> +
> RANDOM NUMBER DRIVER
> M: "Theodore Ts'o" <tytso@....edu>
> S: Maintained
> diff --git a/arch/mips/configs/generic/board-ranchu.config b/arch/mips/configs/generic/board-ranchu.config
> new file mode 100644
> index 0000000..fee9ad4
> --- /dev/null
> +++ b/arch/mips/configs/generic/board-ranchu.config
> @@ -0,0 +1,30 @@
> +CONFIG_VIRT_BOARD_RANCHU=y
> +
> +CONFIG_BATTERY_GOLDFISH=y
> +CONFIG_FB=y
> +CONFIG_FB_GOLDFISH=y
> +CONFIG_GOLDFISH=y
> +CONFIG_STAGING=y
> +CONFIG_GOLDFISH_AUDIO=y
> +CONFIG_GOLDFISH_PIC=y
> +CONFIG_GOLDFISH_PIPE=y
> +CONFIG_GOLDFISH_TTY=y
> +CONFIG_RTC_CLASS=y
> +CONFIG_RTC_DRV_GOLDFISH=y
> +
> +CONFIG_INPUT_EVDEV=y
> +CONFIG_INPUT_KEYBOARD=y
> +CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
> +
> +CONFIG_MAGIC_SYSRQ=y
> +CONFIG_POWER_SUPPLY=y
> +CONFIG_POWER_RESET=y
> +CONFIG_POWER_RESET_SYSCON=y
> +CONFIG_POWER_RESET_SYSCON_POWEROFF=y
> +
> +CONFIG_VIRTIO_BLK=y
> +CONFIG_VIRTIO_CONSOLE=y
> +CONFIG_VIRTIO_MMIO=y
> +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
> +CONFIG_NETDEVICES=y
> +CONFIG_VIRTIO_NET=y
> diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
> index 52e0286..2ff3b17 100644
> --- a/arch/mips/generic/Kconfig
> +++ b/arch/mips/generic/Kconfig
> @@ -49,4 +49,14 @@ config FIT_IMAGE_FDT_XILFPGA
> Enable this to include the FDT for the MIPSfpga platform
> from Imagination Technologies in the FIT kernel image.
>
> +config VIRT_BOARD_RANCHU
> + bool "Support Ranchu platform for Android emulator"
> + help
> + This enables support for the platform used by Android emulator.
> +
> + Ranchu platform consists of a set of virtual devices. This platform
> + enables emulation of variety of virtual configurations while using
> + Android emulator. Android emulator is based on Qemu, and contains
> + the support for the same set of virtual devices.
> +
> endif
> diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
> index 8749673..5fb60c8 100644
> --- a/arch/mips/generic/Makefile
> +++ b/arch/mips/generic/Makefile
> @@ -15,3 +15,4 @@ obj-y += proc.o
> obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o
> obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
> obj-$(CONFIG_KEXEC) += kexec.o
> +obj-$(CONFIG_VIRT_BOARD_RANCHU) += board-ranchu.o
> diff --git a/arch/mips/generic/board-ranchu.c b/arch/mips/generic/board-ranchu.c
> new file mode 100644
> index 0000000..ea451b8
> --- /dev/null
> +++ b/arch/mips/generic/board-ranchu.c
> @@ -0,0 +1,92 @@
> +/*
> + * Support code for virtual Ranchu board for MIPS.
> + *
> + * Author: Miodrag Dinic <miodrag.dinic@...s.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/types.h>
> +
> +#include <asm/machine.h>
> +#include <asm/mipsregs.h>
> +#include <asm/time.h>
> +
> +#define GOLDFISH_TIMER_LOW 0x00
> +#define GOLDFISH_TIMER_HIGH 0x04
> +
> +static __init u64 read_rtc_time(void __iomem *base)
> +{
> + u32 time_low;
> + u32 time_high;
> +
> + /*
> + * Reading the low address latches the high value
> + * as well so there is no fear that we may read
> + * inaccurate high value.
> + */
> + time_low = readl(base + GOLDFISH_TIMER_LOW);
> + time_high = readl(base + GOLDFISH_TIMER_HIGH);
> +
> + return ((u64)time_high << 32) | time_low;
> +}
> +
> +static __init unsigned int ranchu_measure_hpt_freq(void)
> +{
> + u64 rtc_start, rtc_current, rtc_delta;
> + unsigned int start, count;
> + struct device_node *np;
> + void __iomem *rtc_base;
> +
> + np = of_find_compatible_node(NULL, NULL, "google,goldfish-rtc");
> + if (!np)
> + panic("%s(): Failed to find 'google,goldfish-rtc' dt node!",
> + __func__);
> +
> + rtc_base = of_iomap(np, 0);
> + if (!rtc_base)
> + panic("%s(): Failed to ioremap Goldfish RTC base!", __func__);
> +
> + /*
> + * Poll the nanosecond resolution RTC for one
> + * second to calibrate the CPU frequency.
> + */
> + rtc_start = read_rtc_time(rtc_base);
> + start = read_c0_count();
> +
> + do {
> + rtc_current = read_rtc_time(rtc_base);
> + rtc_delta = rtc_current - rtc_start;
> + } while (rtc_delta < NSEC_PER_SEC);
> +
> + count = read_c0_count() - start;
> +
> + /*
> + * Make sure the frequency will be a round number.
> + * Without this correction, the returned value may vary
> + * between subsequent emulation executions.
> + *
> + * TODO: Set this value using device tree.
> + */
> + count += 5000;
> + count -= count % 10000;
> +
> + iounmap(rtc_base);
> +
> + return count;
> +}
> +
> +static const struct of_device_id ranchu_of_match[] __initconst = {
> + {
> + .compatible = "mti,ranchu",
> + },
> +};
> +
> +MIPS_MACHINE(ranchu) = {
> + .matches = ranchu_of_match,
> + .measure_hpt_freq = ranchu_measure_hpt_freq,
> +};
> --
> 2.7.4
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists