| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180203180303.8490-33-alexander.levin@microsoft.com>
Date: Sat, 3 Feb 2018 18:03:52 +0000
From: Sasha Levin <Alexander.Levin@...rosoft.com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"stable@...r.kernel.org" <stable@...r.kernel.org>
CC: Erez Shitrit <erezsh@...lanox.com>,
Leon Romanovsky <leon@...nel.org>,
Jason Gunthorpe <jgg@...lanox.com>,
Sasha Levin <Alexander.Levin@...rosoft.com>
Subject: [PATCH AUTOSEL for 4.9 33/52] IB/ipoib: Fix race condition in neigh
creation
From: Erez Shitrit <erezsh@...lanox.com>
[ Upstream commit 16ba3defb8bd01a9464ba4820a487f5b196b455b ]
When using enhanced mode for IPoIB, two threads may execute xmit in
parallel to two different TX queues while the target is the same.
In this case, both of them will add the same neighbor to the path's
neigh link list and we might see the following message:
list_add double add: new=ffff88024767a348, prev=ffff88024767a348...
WARNING: lib/list_debug.c:31__list_add_valid+0x4e/0x70
ipoib_start_xmit+0x477/0x680 [ib_ipoib]
dev_hard_start_xmit+0xb9/0x3e0
sch_direct_xmit+0xf9/0x250
__qdisc_run+0x176/0x5d0
__dev_queue_xmit+0x1f5/0xb10
__dev_queue_xmit+0x55/0xb10
Analysis:
Two SKB are scheduled to be transmitted from two cores.
In ipoib_start_xmit, both gets NULL when calling ipoib_neigh_get.
Two calls to neigh_add_path are made. One thread takes the spin-lock
and calls ipoib_neigh_alloc which creates the neigh structure,
then (after the __path_find) the neigh is added to the path's neigh
link list. When the second thread enters the critical section it also
calls ipoib_neigh_alloc but in this case it gets the already allocated
ipoib_neigh structure, which is already linked to the path's neigh
link list and adds it again to the list. Which beside of triggering
the list, it creates a loop in the linked list. This loop leads to
endless loop inside path_rec_completion.
Solution:
Check list_empty(&neigh->list) before adding to the list.
Add a similar fix in "ipoib_multicast.c::ipoib_mcast_send"
Fixes: b63b70d87741 ('IPoIB: Use a private hash table for path lookup in xmit path')
Signed-off-by: Erez Shitrit <erezsh@...lanox.com>
Reviewed-by: Alex Vesker <valex@...lanox.com>
Signed-off-by: Leon Romanovsky <leon@...nel.org>
Signed-off-by: Jason Gunthorpe <jgg@...lanox.com>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
---
drivers/infiniband/ulp/ipoib/ipoib_main.c | 25 ++++++++++++++++++-------
drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 5 ++++-
2 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 183db0cd849e..e37e918cb935 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -919,8 +919,8 @@ static int path_rec_start(struct net_device *dev,
return 0;
}
-static void neigh_add_path(struct sk_buff *skb, u8 *daddr,
- struct net_device *dev)
+static struct ipoib_neigh *neigh_add_path(struct sk_buff *skb, u8 *daddr,
+ struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_path *path;
@@ -933,7 +933,15 @@ static void neigh_add_path(struct sk_buff *skb, u8 *daddr,
spin_unlock_irqrestore(&priv->lock, flags);
++dev->stats.tx_dropped;
dev_kfree_skb_any(skb);
- return;
+ return NULL;
+ }
+
+ /* To avoid race condition, make sure that the
+ * neigh will be added only once.
+ */
+ if (unlikely(!list_empty(&neigh->list))) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return neigh;
}
path = __path_find(dev, daddr + 4);
@@ -971,7 +979,7 @@ static void neigh_add_path(struct sk_buff *skb, u8 *daddr,
spin_unlock_irqrestore(&priv->lock, flags);
ipoib_send(dev, skb, path->ah, IPOIB_QPN(daddr));
ipoib_neigh_put(neigh);
- return;
+ return NULL;
}
} else {
neigh->ah = NULL;
@@ -988,7 +996,7 @@ static void neigh_add_path(struct sk_buff *skb, u8 *daddr,
spin_unlock_irqrestore(&priv->lock, flags);
ipoib_neigh_put(neigh);
- return;
+ return NULL;
err_path:
ipoib_neigh_free(neigh);
@@ -998,6 +1006,8 @@ err_drop:
spin_unlock_irqrestore(&priv->lock, flags);
ipoib_neigh_put(neigh);
+
+ return NULL;
}
static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev,
@@ -1103,8 +1113,9 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
case htons(ETH_P_TIPC):
neigh = ipoib_neigh_get(dev, phdr->hwaddr);
if (unlikely(!neigh)) {
- neigh_add_path(skb, phdr->hwaddr, dev);
- return NETDEV_TX_OK;
+ neigh = neigh_add_path(skb, phdr->hwaddr, dev);
+ if (likely(!neigh))
+ return NETDEV_TX_OK;
}
break;
case htons(ETH_P_ARP):
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index fddff403d5d2..6b6826f3e446 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -818,7 +818,10 @@ void ipoib_mcast_send(struct net_device *dev, u8 *daddr, struct sk_buff *skb)
spin_lock_irqsave(&priv->lock, flags);
if (!neigh) {
neigh = ipoib_neigh_alloc(daddr, dev);
- if (neigh) {
+ /* Make sure that the neigh will be added only
+ * once to mcast list.
+ */
+ if (neigh && list_empty(&neigh->list)) {
kref_get(&mcast->ah->ref);
neigh->ah = mcast->ah;
list_add_tail(&neigh->list, &mcast->neigh_list);
--
2.11.0
Powered by blists - more mailing lists