| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFBinCD2TRRraJ7hGoLy2Y42-LAK1ZXyvOLbPCsf1Aip_ELJHQ@mail.gmail.com>
Date: Sat, 3 Feb 2018 19:53:24 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: Jerome Brunet <jbrunet@...libre.com>
Cc: Neil Armstrong <narmstrong@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
linux-kernel@...r.kernel.org, Carlo Caione <carlo@...one.org>,
linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH 08/19] clk: meson: add regmap to the clock controllers
On Wed, Jan 31, 2018 at 7:09 PM, Jerome Brunet <jbrunet@...libre.com> wrote:
> This change register a regmap in meson8b, gxbb and axg controllers.
> The clock are still accessing their registers directly through iomem.
> Once all clocks handled by these controllers have been move to regmap,
> the regmap register will be removed and replaced with a syscon request.
maybe you can add a comment that some of the registers from this area
need to be accessed outside the clock driver (by the HDMI driver for
example - which is the case on GX and Meson8/8b IIRC) if you have to
re-spin this series
> Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> ---
> drivers/clk/meson/Kconfig | 2 ++
> drivers/clk/meson/axg.c | 15 ++++++++++++++-
> drivers/clk/meson/gxbb.c | 33 +++++++++++++++++++++++----------
> drivers/clk/meson/meson8b.c | 14 +++++++++++++-
> 4 files changed, 52 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 33d148e19066..9735335b17a9 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -11,6 +11,7 @@ config COMMON_CLK_MESON8B
> bool
> depends on COMMON_CLK_AMLOGIC
> select RESET_CONTROLLER
> + select REGMAP
> help
> Support for the clock controller on AmLogic S802 (Meson8),
> S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you
> @@ -29,6 +30,7 @@ config COMMON_CLK_AXG
> bool
> depends on COMMON_CLK_AMLOGIC
> select RESET_CONTROLLER
> + select REGMAP
> help
> Support for the clock controller on AmLogic A113D devices, aka axg.
> Say Y if you want peripherals and CPU frequency scaling to work.
> diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
> index f84927e76f88..669d0ed84ebc 100644
> --- a/drivers/clk/meson/axg.c
> +++ b/drivers/clk/meson/axg.c
> @@ -11,10 +11,11 @@
>
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> +#include <linux/init.h>
> #include <linux/of_address.h>
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> -#include <linux/init.h>
> +#include <linux/regmap.h>
>
> #include "clkc.h"
> #include "axg.h"
> @@ -791,12 +792,19 @@ static const struct of_device_id clkc_match_table[] = {
> {}
> };
>
> +static const struct regmap_config clkc_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> static int axg_clkc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> const struct clkc_data *clkc_data;
> struct resource *res;
> void __iomem *clk_base;
> + struct regmap *map;
> int ret, i;
>
> clkc_data = of_device_get_match_data(dev);
> @@ -807,12 +815,17 @@ static int axg_clkc_probe(struct platform_device *pdev)
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (!res)
> return -EINVAL;
> +
> clk_base = devm_ioremap(dev, res->start, resource_size(res));
> if (!clk_base) {
> dev_err(dev, "Unable to map clk base\n");
> return -ENXIO;
> }
>
> + map = devm_regmap_init_mmio(dev, clk_base, &clkc_regmap_config);
> + if (IS_ERR(map))
> + return PTR_ERR(map);
> +
> /* Populate base address for PLLs */
> for (i = 0; i < clkc_data->clk_plls_count; i++)
> clkc_data->clk_plls[i]->base = clk_base;
> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
> index 6609024eee00..e3faf0a0fdb7 100644
> --- a/drivers/clk/meson/gxbb.c
> +++ b/drivers/clk/meson/gxbb.c
> @@ -19,10 +19,11 @@
>
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> +#include <linux/init.h>
> #include <linux/of_address.h>
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> -#include <linux/init.h>
> +#include <linux/regmap.h>
>
> #include "clkc.h"
> #include "gxbb.h"
> @@ -1937,10 +1938,18 @@ static const struct of_device_id clkc_match_table[] = {
> {},
> };
>
> +static const struct regmap_config clkc_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> static int gxbb_clkc_probe(struct platform_device *pdev)
> {
> const struct clkc_data *clkc_data;
> + struct resource *res;
> void __iomem *clk_base;
> + struct regmap *map;
> int ret, i;
> struct device *dev = &pdev->dev;
>
> @@ -1948,13 +1957,20 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
> if (!clkc_data)
> return -EINVAL;
>
> - /* Generic clocks and PLLs */
> - clk_base = of_iomap(dev->of_node, 0);
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return -EINVAL;
> +
> + clk_base = devm_ioremap(dev, res->start, resource_size(res));
> if (!clk_base) {
> pr_err("%s: Unable to map clk base\n", __func__);
> return -ENXIO;
> }
>
> + map = devm_regmap_init_mmio(dev, clk_base, &clkc_regmap_config);
> + if (IS_ERR(map))
> + return PTR_ERR(map);
> +
> /* Populate base address for PLLs */
> for (i = 0; i < clkc_data->clk_plls_count; i++)
> clkc_data->clk_plls[i]->base = clk_base;
> @@ -1991,17 +2007,14 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
>
> ret = devm_clk_hw_register(dev,
> clkc_data->hw_onecell_data->hws[i]);
> - if (ret)
> - goto iounmap;
> + if (ret) {
> + dev_err(dev, "Clock registration failed\n");
> + return ret;
> + }
> }
>
> -
> return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> clkc_data->hw_onecell_data);
> -
> -iounmap:
> - iounmap(clk_base);
> - return ret;
> }
>
> static struct platform_driver gxbb_driver = {
> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
> index db017c29a84c..0981e970de3d 100644
> --- a/drivers/clk/meson/meson8b.c
> +++ b/drivers/clk/meson/meson8b.c
> @@ -23,11 +23,12 @@
>
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> +#include <linux/init.h>
> #include <linux/of_address.h>
> #include <linux/platform_device.h>
> #include <linux/reset-controller.h>
> #include <linux/slab.h>
> -#include <linux/init.h>
> +#include <linux/regmap.h>
>
> #include "clkc.h"
> #include "meson8b.h"
> @@ -804,16 +805,27 @@ static const struct reset_control_ops meson8b_clk_reset_ops = {
> .deassert = meson8b_clk_reset_deassert,
> };
>
> +static const struct regmap_config clkc_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> static int meson8b_clkc_probe(struct platform_device *pdev)
> {
> int ret, i;
> struct clk_hw *parent_hw;
> struct clk *parent_clk;
> struct device *dev = &pdev->dev;
> + struct regmap *map;
>
> if (!clk_base)
> return -ENXIO;
>
> + map = devm_regmap_init_mmio(dev, clk_base, &clkc_regmap_config);
> + if (IS_ERR(map))
> + return PTR_ERR(map);
> +
> /* Populate base address for PLLs */
> for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++)
> meson8b_clk_plls[i]->base = clk_base;
> --
> 2.14.3
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
Powered by blists - more mailing lists