[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180205082445.GA18274@amd>
Date: Mon, 5 Feb 2018 09:24:45 +0100
From: Pavel Machek <pavel@....cz>
To: Peter Ujfalusi <peter.ujfalusi@...com>
Cc: lgirdwood@...il.com, broonie@...nel.org, robh+dt@...nel.org,
mark.rutland@....com, perex@...ex.cz, tiwai@...e.com,
bhumirks@...il.com, alsa-devel@...a-project.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
pali.rohar@...il.com, sre@...nel.org,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-omap@...r.kernel.org, tony@...mide.com, khilman@...nel.org,
aaro.koskinen@....fi, ivo.g.dimitrov.75@...il.com,
patrikbachan@...il.com, serge@...lyn.com, abcloriens@...il.com,
clayton@...ftyguy.net, martijn@...xit.nl,
sakari.ailus@...ux.intel.com,
Filip Matijević <filip.matijevic.pz@...il.com>
Subject: [PATCHv3] tlv320dac33: Add device tree bindings
This adds device tree bindings for tlv320dac33.c.
Acked-by: Peter Ujfalusi <peter.ujfalusi@...com>
Signed-off-by: Pavel Machek <pavel@....cz>
diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
new file mode 100644
index 0000000..aee0a87
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
@@ -0,0 +1,32 @@
+Texas Instruments - tlv320dac33 Codec module
+
+The tlv320dac33 serial control bus communicates through I2C protocols.
+
+Required properties:
+
+- compatible - "ti,tlv320dac33"
+- reg - I2C slave address
+- ti,burst-bclkdiv - BCLK divider value in burst mode. Valid range is 1..255.
+
+Optional properties:
+
+- reset-gpios - gpio pin to power the device, active high.
+
+- interrupts - The interrupt output from the device.
+- interrupt-parent - The parent interrupt controller.
+
+- ti,keep-bclk - Keep the BCLK running in FIFO modes.
+
+Example:
+
+tlv320dac33: audio-codec@19 {
+ compatible = "ti,tlv320dac33";
+ reg = <0x19>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */
+ reset-gpios = <&gpio2 28 0>; /* gpio_60 */
+
+ ti,keep-bclk;
+ ti,burst-bclkdiv = <3>;
+};
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)
Powered by blists - more mailing lists