[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <508a5777-a009-15d9-6d5a-bed1b1bfa1e7@codeaurora.org>
Date: Tue, 6 Feb 2018 11:25:43 +0530
From: Sricharan R <sricharan@...eaurora.org>
To: Abhishek Sahu <absahu@...eaurora.org>
Cc: mark.rutland@....com, robh@...nel.org, devicetree@...r.kernel.org,
catalin.marinas@....com, will.deacon@....com,
linux@...linux.org.uk, bjorn.andersson@...aro.org,
david.brown@...aro.org, robh+dt@...nel.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, andy.gross@...aro.org,
linux-arm-msm-owner@...r.kernel.org, linux-soc@...r.kernel.org,
sboyd@...eaurora.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 05/15] ARM: dts: ipq4019: Add ipq4019-ap-dk01-c2 board
file
Hi Abhishek,
On 2/3/2018 4:25 PM, Abhishek Sahu wrote:
> On 2018-01-29 10:41, Sricharan R wrote:
>> The board has a spi-nand interface on spi0 bus chipselect1.
>>
>> Signed-off-by: Sricharan R <sricharan@...eaurora.org>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts | 25
>> +++++++++++++++++++++++++
>> 2 files changed, 26 insertions(+)
>> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index d0381e9..21ed56d 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>> qcom-apq8084-ifc6540.dtb \
>> qcom-apq8084-mtp.dtb \
>> qcom-ipq4019-ap.dk01.1-c1.dtb \
>> + qcom-ipq4019-ap.dk01.1-c2.dtb \
>> qcom-ipq8064-ap148.dtb \
>> qcom-msm8660-surf.dtb \
>> qcom-msm8960-cdp.dtb \
>> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>> new file mode 100644
>> index 0000000..e3442da
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
>> @@ -0,0 +1,25 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
>> +
>> +#include "qcom-ipq4019-ap.dk01.1.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2";
>
> s/IPQ40xx/IPQ4019
>
ok
>> +
>> + soc {
>> + spi_0: spi@...5000 { /* BLSP1 QUP1 */
>> + status = "ok";
>> + cs-gpios = <&tlmm 54 0>, <&tlmm 59 0>;
>
> the base dk01 file has pinmux for 54 only.
> for 59 pin, we need to add pinmux entry also.
>
ok. btw, infact think that 59 should be removed.
Regards,
Sricharan
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists