[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4df81f9e-a018-822c-066b-e9735ed9908b@codeaurora.org>
Date: Tue, 6 Feb 2018 11:48:49 +0530
From: Sricharan R <sricharan@...eaurora.org>
To: Abhishek Sahu <absahu@...eaurora.org>
Cc: mark.rutland@....com, robh@...nel.org, devicetree@...r.kernel.org,
catalin.marinas@....com, will.deacon@....com,
linux@...linux.org.uk, bjorn.andersson@...aro.org,
david.brown@...aro.org, robh+dt@...nel.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, andy.gross@...aro.org,
linux-arm-msm-owner@...r.kernel.org, linux-soc@...r.kernel.org,
sboyd@...eaurora.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 07/15] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board
file
Hi Abhishek,
On 2/3/2018 5:00 PM, Abhishek Sahu wrote:
> On 2018-01-29 10:41, Sricharan R wrote:
>> Signed-off-by: Sricharan R <sricharan@...eaurora.org>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 8 ++++++++
>> 2 files changed, 9 insertions(+)
>> create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 21ed56d..1a8ab050 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>> qcom-apq8084-mtp.dtb \
>> qcom-ipq4019-ap.dk01.1-c1.dtb \
>> qcom-ipq4019-ap.dk01.1-c2.dtb \
>> + qcom-ipq4019-ap.dk04.1-c1.dtb \
>> qcom-ipq8064-ap148.dtb \
>> qcom-msm8660-surf.dtb \
>> qcom-msm8960-cdp.dtb \
>> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>> new file mode 100644
>> index 0000000..41123be
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>> @@ -0,0 +1,8 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
>> +
>> +#include "qcom-ipq4019-ap.dk04.1.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
>> +};
>
> It seems major diff between DK01 C1 and other variants is
> qpic nand. qpic nand is only available in C1 so do we need
> to disable the nand is base dk04 dtsi and enable it in this
> C1 dts only. same for qpic bam.
C1 - Has QPIC NAND, spi 78b5000-> cs0 -> spi_nor
C5 - Has QPIC NAND, spi 78b5000-> cs0 -> spi_nor, cs1 -> spi_nand
C2 - Has QPIC NAND, spi 78b5000-> cs0 -> spi_nor ( Audio board, yet to be posted for pending audio drivers)
C3 - spi 78b5000-> cs0 -> spi_nor
So C3 is the board where it is disabled and enabled in the rest. But from a
readability point, feels better to touch this only in each board specific file.
So will remove this from the common 04.dtsi and move it to each board file.
Regards,
Sricharan
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists