| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <46ddcf7e35d89c232b13f80234ceb05ae254da2a.1517908478.git.baolin.wang@linaro.org>
Date: Tue, 6 Feb 2018 17:28:26 +0800
From: Baolin Wang <baolin.wang@...aro.org>
To: robh+dt@...nel.org, mark.rutland@....com, catalin.marinas@....com,
will.deacon@....com, arnd@...db.de
Cc: chunyan.zhang@...eadtrum.com, orson.zhai@...eadtrum.com,
mathieu.poirier@...aro.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
broonie@...nel.org, baolin.wang@...aro.org
Subject: [PATCH 7/7] arm64: dts: Add SC2731 PMIC dts file for Spreadtrum SC9860
The Spreadtrum SC9860 platform has one SC2731 PMIC, and the SC2731
PMIC integrates all mobile handset power management, audio codec,
battery management and user interface support function in a single
chip.
This patch adds the SC2731 dts file, as well as adding the RTC and
regulator device node for this PMIC.
Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
---
arch/arm64/boot/dts/sprd/sc2731.dtsi | 169 +++++++++++++++++++++++++++++
arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 1 +
2 files changed, 170 insertions(+)
create mode 100644 arch/arm64/boot/dts/sprd/sc2731.dtsi
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
new file mode 100644
index 0000000..4331006
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -0,0 +1,169 @@
+/*
+ * Spreadtrum SC2731 PMIC dts file
+ *
+ * Copyright (C) 2018, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&adi_bus {
+ sc2731_pmic: pmic@0 {
+ compatible = "sprd,sc2731";
+ reg = <0>;
+ spi-max-frequency = <26000000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@280 {
+ compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
+ reg = <0x280>;
+ interrupt-parent = <&sc2731_pmic>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ regulators {
+ compatible = "sprd,sc27xx-regulator";
+
+ vddarm0: BUCK_CPU0 {
+ regulator-name = "vddarm0";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1996875>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ };
+
+ vddarm1: BUCK_CPU1 {
+ regulator-name = "vddarm1";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1996875>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ };
+
+ dcdcrf: BUCK_RF {
+ regulator-name = "dcdcrf";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2196875>;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-always-on;
+ };
+
+ vddcama0: LDO_CAMA0 {
+ regulator-name = "vddcama0";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ };
+
+ vddcama1: LDO_CAMA1 {
+ regulator-name = "vddcama1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcammot: LDO_CAMMOT {
+ regulator-name = "vddcammot";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddvldo: LDO_VLDO {
+ regulator-name = "vddvldo";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddemmccore: LDO_EMMCCORE {
+ regulator-name = "vddemmccore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ regulator-boot-on;
+ };
+
+ vddsdcore: LDO_SDCORE {
+ regulator-name = "vddsdcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddsdio: LDO_SDIO {
+ regulator-name = "vddsdio";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddwifipa: LDO_WIFIPA {
+ regulator-name = "vddwifipa";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddusb33: LDO_USB33 {
+ regulator-name = "vddusb33";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcamd0: LDO_CAMD0 {
+ regulator-name = "vddcamd0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcamd1: LDO_CAMD1 {
+ regulator-name = "vddcamd1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcon: LDO_CON {
+ regulator-name = "vddcon";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddcamio: LDO_CAMIO {
+ regulator-name = "vddcamio";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ };
+
+ vddsram: LDO_SRAM {
+ regulator-name = "vddsram";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1793750>;
+ regulator-enable-ramp-delay = <100>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
index 550f323..3bd18e3 100644
--- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "sc9860.dtsi"
+#include "sc2731.dtsi"
/ {
model = "Spreadtrum SP9860G 3GFHD Board";
--
1.7.9.5
Powered by blists - more mailing lists