[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180207211713.3638-2-jernej.skrabec@siol.net>
Date: Wed, 7 Feb 2018 22:17:02 +0100
From: Jernej Skrabec <jernej.skrabec@...l.net>
To: maxime.ripard@...e-electrons.com, wens@...e.org, airlied@...ux.ie,
robh+dt@...nel.org, mark.rutland@....com, mturquette@...libre.com,
sboyd@...nel.org, architt@...eaurora.org, a.hajda@...sung.com,
Laurent.pinchart@...asonboard.com, narmstrong@...libre.com,
Jose.Abreu@...opsys.com
Cc: jernej.skrabec@...l.net, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [PATCH v4 01/12] clk: sunxi-ng: Mask nkmp factors when setting register
Currently, if one of the factors isn't present, bit 0 gets always set to
1. For example, A83T has NMP PLLs modelled as NKMP PLL without K. Since
K is not specified, it's offset, width and shift is 0. Driver assumes
that lowest value possible is 1, otherwise we would get division by 0.
That situation causes that bit 0 is always set, which may change wanted
clock rate.
Fix that by masking every factor according to it's specified width.
Factors with width set to 0 won't have any influence to final register
value.
Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
---
drivers/clk/sunxi-ng/ccu_nkmp.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
index e58c95787f94..a99068a08315 100644
--- a/drivers/clk/sunxi-ng/ccu_nkmp.c
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -134,6 +134,7 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
+ u32 n_mask, k_mask, m_mask, p_mask;
struct _ccu_nkmp _nkmp;
unsigned long flags;
u32 reg;
@@ -149,18 +150,20 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
+ n_mask = GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift);
+ k_mask = GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift);
+ m_mask = GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift);
+ p_mask = GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift);
+
spin_lock_irqsave(nkmp->common.lock, flags);
reg = readl(nkmp->common.base + nkmp->common.reg);
- reg &= ~GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift);
- reg &= ~GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift);
- reg &= ~GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift);
- reg &= ~GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift);
-
- reg |= (_nkmp.n - nkmp->n.offset) << nkmp->n.shift;
- reg |= (_nkmp.k - nkmp->k.offset) << nkmp->k.shift;
- reg |= (_nkmp.m - nkmp->m.offset) << nkmp->m.shift;
- reg |= ilog2(_nkmp.p) << nkmp->p.shift;
+ reg &= ~(n_mask | k_mask | m_mask | p_mask);
+
+ reg |= ((_nkmp.n - nkmp->n.offset) << nkmp->n.shift) & n_mask;
+ reg |= ((_nkmp.k - nkmp->k.offset) << nkmp->k.shift) & k_mask;
+ reg |= ((_nkmp.m - nkmp->m.offset) << nkmp->m.shift) & m_mask;
+ reg |= (ilog2(_nkmp.p) << nkmp->p.shift) & p_mask;
writel(reg, nkmp->common.base + nkmp->common.reg);
--
2.16.1
Powered by blists - more mailing lists