lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0bd2c95c-dab3-9796-1267-472e6a00a403@amlogic.com>
Date:   Thu, 8 Feb 2018 15:33:55 +0800
From:   Yixun Lan <yixun.lan@...ogic.com>
To:     Jerome Brunet <jbrunet@...libre.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        Kevin Hilman <khilman@...libre.com>
CC:     <yixun.lan@...ogic.com>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...eaurora.org>,
        <linux-kernel@...r.kernel.org>, Carlo Caione <carlo@...one.org>,
        <linux-amlogic@...ts.infradead.org>, <linux-clk@...r.kernel.org>
Subject: Re: [PATCH 05/19] clk: meson: add regmap clocks

HI Jerome:

On 02/01/18 02:09, Jerome Brunet wrote:
> Meson clock controllers needs to move the classical iomem registers to
> regmap. This is triggered because the HHI controllers found on the GXBB
> and GXL host more than just clocks. To properly handle this, we would
> like to migrate HHI to syscon. Also GXBB AO clock controller already use
> regmap, AXG AO and Audio clock controllers will as well.
> 
> The purpose of this change is to provide a common structure to these
> meson controllers (and possibly others) for regmap based clocks.
> 
> This change provides the basic gate, mux and divider, based on the
> helpers provided by the related generic clocks
> 
> Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
> ---
>  drivers/clk/meson/Kconfig      |   4 +
>  drivers/clk/meson/Makefile     |   1 +
>  drivers/clk/meson/clk-regmap.c | 166 +++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/clk-regmap.h | 111 +++++++++++++++++++++++++++
>  4 files changed, 282 insertions(+)
>  create mode 100644 drivers/clk/meson/clk-regmap.c
>  create mode 100644 drivers/clk/meson/clk-regmap.h
> 
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 7694302c70a4..e97e85077da1 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -3,6 +3,10 @@ config COMMON_CLK_AMLOGIC
>  	depends on OF
>  	depends on ARCH_MESON || COMPILE_TEST
>  
> +config COMMON_CLK_REGMAP_MESON
> +	bool
> +	select REGMAP
> +
>  config COMMON_CLK_MESON8B
>  	bool
>  	depends on COMMON_CLK_AMLOGIC
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 3c03ce583798..11a50586666a 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -6,3 +6,4 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-div
>  obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
>  obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
>  obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o
> +obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
> diff --git a/drivers/clk/meson/clk-regmap.c b/drivers/clk/meson/clk-regmap.c
> new file mode 100644
> index 000000000000..3645fdb62343
> --- /dev/null
> +++ b/drivers/clk/meson/clk-regmap.c
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 BayLibre, SAS.
> +// Author: Jerome Brunet <jbrunet@...libre.com>
> +
> +#include "clk-regmap.h"
> +
> +static int clk_regmap_gate_endisable(struct clk_hw *hw, int enable)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct clk_regmap_gate_data *gate = clk_get_regmap_gate_data(clk);
> +	int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
> +
> +	set ^= enable;
> +
> +	return regmap_update_bits(clk->map, gate->offset, BIT(gate->bit_idx),
> +				  set ? BIT(gate->bit_idx) : 0);
> +}
> +
> +static int clk_regmap_gate_enable(struct clk_hw *hw)
> +{
> +	return clk_regmap_gate_endisable(hw, 1);
> +}
> +
> +static void clk_regmap_gate_disable(struct clk_hw *hw)
> +{
> +	clk_regmap_gate_endisable(hw, 0);
> +}
> +
> +static int clk_regmap_gate_is_enabled(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct clk_regmap_gate_data *gate = clk_get_regmap_gate_data(clk);
> +	unsigned int val;
> +
> +	regmap_read(clk->map, gate->offset, &val);
> +	if (gate->flags & CLK_GATE_SET_TO_DISABLE)
> +		val ^= BIT(gate->bit_idx);
> +
> +	val &= BIT(gate->bit_idx);
> +
> +	return val ? 1 : 0;
> +}
> +
> +const struct clk_ops clk_regmap_gate_ops = {
> +	.enable = clk_regmap_gate_enable,
> +	.disable = clk_regmap_gate_disable,
> +	.is_enabled = clk_regmap_gate_is_enabled,
> +};
> +EXPORT_SYMBOL_GPL(clk_regmap_gate_ops);
> +
> +static unsigned long clk_regmap_div_recalc_rate(struct clk_hw *hw,
> +						unsigned long prate)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(clk->map, div->offset, &val);
> +	if (ret)
> +		/* Gives a hint that something is wrong */
> +		return 0;
> +
> +	val >>= div->shift;
> +	val &= clk_div_mask(div->width);
> +	return divider_recalc_rate(hw, prate, val, div->table, div->flags,
> +				   div->width);
> +}
> +
> +static long clk_regmap_div_round_rate(struct clk_hw *hw, unsigned long rate,
> +				      unsigned long *prate)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
> +	unsigned int val;
> +	int ret;
> +
> +	/* if read only, just return current value */
> +	if (div->flags & CLK_DIVIDER_READ_ONLY) {
> +		ret = regmap_read(clk->map, div->offset, &val);
> +		if (ret)
> +			/* Gives a hint that something is wrong */
> +			return 0;
> +
> +		val >>= div->shift;
> +		val &= clk_div_mask(div->width);
> +
> +		return divider_ro_round_rate(hw, rate, prate, div->table,
> +					     div->width, div->flags, val);
> +	}
> +
> +	return divider_round_rate(hw, rate, prate, div->table, div->width,
> +				  div->flags);
> +}
> +
> +static int clk_regmap_div_set_rate(struct clk_hw *hw, unsigned long rate,
> +				   unsigned long parent_rate)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = divider_get_val(rate, parent_rate, div->table, div->width,
> +			      div->flags);
> +	if (ret < 0)
> +		return ret;
> +
> +	val = (unsigned int)ret << div->shift;
> +	return regmap_update_bits(clk->map, div->offset,
> +				  clk_div_mask(div->width) << div->shift, val);
> +};
> +
> +/* Would prefer clk_regmap_div_ro_ops but clashes with qcom */
> +
> +const struct clk_ops clk_regmap_divider_ops = {
> +	.recalc_rate = clk_regmap_div_recalc_rate,
> +	.round_rate = clk_regmap_div_round_rate,
> +	.set_rate = clk_regmap_div_set_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_regmap_divider_ops);
> +
> +const struct clk_ops clk_regmap_divider_ro_ops = {
> +	.recalc_rate = clk_regmap_div_recalc_rate,
> +	.round_rate = clk_regmap_div_round_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_regmap_divider_ro_ops);
> +
> +static u8 clk_regmap_mux_get_parent(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk);
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(clk->map, mux->offset, &val);
> +	if (ret)
> +		return ret;
> +
> +	val >>= mux->shift;
> +	val &= mux->mask;
> +	return clk_mux_val_to_index(hw, mux->table, mux->flags, val);
> +}
> +
> +static int clk_regmap_mux_set_parent(struct clk_hw *hw, u8 index)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk);
> +	unsigned int val = clk_mux_index_to_val(mux->table, mux->flags, index);
> +
> +	return regmap_update_bits(clk->map, mux->offset,
> +				  mux->mask << mux->shift,
> +				  val << mux->shift);
> +}
> +
> +const struct clk_ops clk_regmap_mux_ops = {
> +	.get_parent = clk_regmap_mux_get_parent,
> +	.set_parent = clk_regmap_mux_set_parent,
> +	.determine_rate = __clk_mux_determine_rate,
> +};
> +EXPORT_SYMBOL_GPL(clk_regmap_mux_ops);
> +
> +const struct clk_ops clk_regmap_mux_ro_ops = {
> +	.get_parent = clk_regmap_mux_get_parent,
> +};
> +EXPORT_SYMBOL_GPL(clk_regmap_mux_ro_ops);
> diff --git a/drivers/clk/meson/clk-regmap.h b/drivers/clk/meson/clk-regmap.h
> new file mode 100644
> index 000000000000..ab00a0578edf
> --- /dev/null
> +++ b/drivers/clk/meson/clk-regmap.h
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 BayLibre, SAS.
> +// Author: Jerome Brunet <jbrunet@...libre.com>
> +
> +#ifndef __CLK_REGMAP_H
> +#define __CLK_REGMAP_H
> +
> +#include <linux/clk-provider.h>
> +#include <linux/regmap.h>
> +
> +/**
> + * struct clk_regmap - regmap backed clock
> + *
> + * @hw:		handle between common and hardware-specific interfaces
> + * @map:	pointer to the regmap structure controlling the clock
> + * @data:	data specific to the clock type
> + *
> + * Clock which is controlled by regmap backed registers. The actual type of
> + * of the clock is controlled by the clock_ops and data.
> + */
> +struct clk_regmap {
> +	struct clk_hw	hw;
> +	struct regmap	*map;
> +	void		*data;
> +};
> +
> +#define to_clk_regmap(_hw) container_of(_hw, struct clk_regmap, hw)
> +
> +/**
> + * struct clk_regmap_gate_data - regmap backed gate specific data
> + *
> + * @offset:	offset of the register controlling gate
> + * @bit_idx:	single bit controlling gate
> + * @flags:	hardware-specific flags
> + *
> + * Flags:
> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
> + */
> +struct clk_regmap_gate_data {
> +	unsigned int	offset;
> +	u8		bit_idx;
> +	u8		flags;
> +};
> +
> +static inline struct clk_regmap_gate_data *
> +clk_get_regmap_gate_data(struct clk_regmap *clk)
> +{
> +	return (struct clk_regmap_gate_data *)clk->data;
> +}
> +
> +extern const struct clk_ops clk_regmap_gate_ops;
> +
> +/**
> + * struct clk_regmap_div_data - regmap backed adjustable divider specific data
> + *
> + * @offset:	offset of the register controlling the divider
> + * @shift:	shift to the divider bit field
> + * @width:	width of the divider bit field
> + * @table:	array of value/divider pairs, last entry should have div = 0
> + *
> + * Flags:
> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
> + */
> +struct clk_regmap_div_data {
> +	unsigned int	offset;
> +	u8		shift;
> +	u8		width;
> +	u8		flags;
> +	const struct clk_div_table	*table;
> +};
> +
> +static inline struct clk_regmap_div_data *
> +clk_get_regmap_div_data(struct clk_regmap *clk)
> +{
> +	return (struct clk_regmap_div_data *)clk->data;
> +}
> +
> +extern const struct clk_ops clk_regmap_divider_ops;
> +extern const struct clk_ops clk_regmap_divider_ro_ops;
> +
> +/**
> + * struct clk_regmap_mux_data - regmap backed multiplexer clock specific data
> + *
> + * @hw:		handle between common and hardware-specific interfaces
> + * @offset:	offset of theregister controlling multiplexer
> + * @table:	array of parent indexed register values
> + * @shift:	shift to multiplexer bit field
> + * @width:	width of mutliplexer bit field
      ~~~~~~ this is wrong, please update to keep it sync with the
struct definition

> + * @flags:	hardware-specific flags
> + *
> + * Flags:
> + * Same as clk_divider except CLK_MUX_HIWORD_MASK which is ignored
> + */
> +struct clk_regmap_mux_data {
> +	unsigned int	offset;
> +	u32		*table;
> +	u32		mask;
                        ~~~~~ here
> +	u8		shift;
> +	u8		flags;
> +};
> +
> +static inline struct clk_regmap_mux_data *
> +clk_get_regmap_mux_data(struct clk_regmap *clk)
> +{
> +	return (struct clk_regmap_mux_data *)clk->data;
> +}
> +
> +extern const struct clk_ops clk_regmap_mux_ops;
> +extern const struct clk_ops clk_regmap_mux_ro_ops;
> +
> +#endif /* __CLK_REGMAP_H */
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ