lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180208023648.89124-4-dbasehore@chromium.org>
Date:   Wed,  7 Feb 2018 18:36:48 -0800
From:   Derek Basehore <dbasehore@...omium.org>
To:     linux-kernel@...r.kernel.org
Cc:     Soby.Mathew@....com, sudeep.holla@....com,
        devicetree@...r.kernel.org, robh+dt@...nel.org,
        mark.rutland@....com, linux-pm@...r.kernel.org,
        rafael.j.wysocki@...el.com, tglx@...utronix.de,
        briannorris@...omium.org, marc.zyngier@....com,
        Derek Basehore <dbasehore@...omium.org>
Subject: [PATCH v6 3/3] irqchip/gic-v3-its: add ability to resend MAPC on resume

This adds functionality to resend the MAPC command to an ITS node on
resume. If the ITS is powered down during suspend and the collections
are not backed by memory, the ITS will lose that state. This just sets
up the known state for the collections after the ITS is restored.

This is enabled via the reset-on-suspend flag in the DTS. It only runs
for collections stored in the ITS itself.

Signed-off-by: Derek Basehore <dbasehore@...omium.org>
---
 drivers/irqchip/irq-gic-v3-its.c   | 86 +++++++++++++++++++++-----------------
 include/linux/irqchip/arm-gic-v3.h |  1 +
 2 files changed, 49 insertions(+), 38 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 35ad48f51dfa..a564a92ab169 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -1942,52 +1942,53 @@ static void its_cpu_init_lpis(void)
 	dsb(sy);
 }
 
-static void its_cpu_init_collection(void)
+static void its_cpu_init_collection(struct its_node *its)
 {
-	struct its_node *its;
-	int cpu;
-
-	spin_lock(&its_lock);
-	cpu = smp_processor_id();
-
-	list_for_each_entry(its, &its_nodes, entry) {
-		u64 target;
+	int cpu = smp_processor_id();
+	u64 target;
 
-		/* avoid cross node collections and its mapping */
-		if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
-			struct device_node *cpu_node;
+	/* avoid cross node collections and its mapping */
+	if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
+		struct device_node *cpu_node;
 
-			cpu_node = of_get_cpu_node(cpu, NULL);
-			if (its->numa_node != NUMA_NO_NODE &&
-				its->numa_node != of_node_to_nid(cpu_node))
-				continue;
-		}
+		cpu_node = of_get_cpu_node(cpu, NULL);
+		if (its->numa_node != NUMA_NO_NODE &&
+			its->numa_node != of_node_to_nid(cpu_node))
+			return;
+	}
 
+	/*
+	 * We now have to bind each collection to its target
+	 * redistributor.
+	 */
+	if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
 		/*
-		 * We now have to bind each collection to its target
+		 * This ITS wants the physical address of the
 		 * redistributor.
 		 */
-		if (gic_read_typer(its->base + GITS_TYPER) & GITS_TYPER_PTA) {
-			/*
-			 * This ITS wants the physical address of the
-			 * redistributor.
-			 */
-			target = gic_data_rdist()->phys_base;
-		} else {
-			/*
-			 * This ITS wants a linear CPU number.
-			 */
-			target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
-			target = GICR_TYPER_CPU_NUMBER(target) << 16;
-		}
+		target = gic_data_rdist()->phys_base;
+	} else {
+		/* This ITS wants a linear CPU number. */
+		target = gic_read_typer(gic_data_rdist_rd_base() + GICR_TYPER);
+		target = GICR_TYPER_CPU_NUMBER(target) << 16;
+	}
 
-		/* Perform collection mapping */
-		its->collections[cpu].target_address = target;
-		its->collections[cpu].col_id = cpu;
+	/* Perform collection mapping */
+	its->collections[cpu].target_address = target;
+	its->collections[cpu].col_id = cpu;
 
-		its_send_mapc(its, &its->collections[cpu], 1);
-		its_send_invall(its, &its->collections[cpu]);
-	}
+	its_send_mapc(its, &its->collections[cpu], 1);
+	its_send_invall(its, &its->collections[cpu]);
+}
+
+static void its_cpu_init_collections(void)
+{
+	struct its_node *its;
+
+	spin_lock(&its_lock);
+
+	list_for_each_entry(its, &its_nodes, entry)
+		its_cpu_init_collection(its);
 
 	spin_unlock(&its_lock);
 }
@@ -3131,6 +3132,15 @@ static void its_restore_enable(void)
 			its_write_baser(its, baser, baser->val);
 		}
 		writel_relaxed(its->ctlr_save, base + GITS_CTLR);
+
+		/*
+		 * Reinit the collection if it's stored in the ITS. This is
+		 * indicated by the col_id being less than the HWCOLLCNT.
+		 * CID < HCC as specified in the GIC v3 Documentation.
+		 */
+		if (its->collections[smp_processor_id()].col_id <
+		    GITS_TYPER_HWCOLLCNT(gic_read_typer(base + GITS_TYPER)))
+			its_cpu_init_collection(its);
 	}
 	spin_unlock(&its_lock);
 }
@@ -3397,7 +3407,7 @@ int its_cpu_init(void)
 			return -ENXIO;
 		}
 		its_cpu_init_lpis();
-		its_cpu_init_collection();
+		its_cpu_init_collections();
 	}
 
 	return 0;
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index c00c4c33e432..c9c33b91a1f1 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -313,6 +313,7 @@
 #define GITS_TYPER_DEVBITS(r)		((((r) >> GITS_TYPER_DEVBITS_SHIFT) & 0x1f) + 1)
 #define GITS_TYPER_PTA			(1UL << 19)
 #define GITS_TYPER_HWCOLLCNT_SHIFT	24
+#define GITS_TYPER_HWCOLLCNT(r)		(((r) >> GITS_TYPER_HWCOLLCNT_SHIFT) & 0xff)
 #define GITS_TYPER_VMOVP		(1ULL << 37)
 
 #define GITS_IIDR_REV_SHIFT		12
-- 
2.16.0.rc1.238.g530d649a79-goog

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ