[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180209120732.17863-5-j.neuschaefer@gmx.net>
Date: Fri, 9 Feb 2018 13:07:31 +0100
From: Jonathan Neuschäfer <j.neuschaefer@....net>
To: linux-kernel@...r.kernel.org
Cc: Joel Stanley <joel@....id.au>, linuxppc-dev@...ts.ozlabs.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
Jonathan Neuschäfer <j.neuschaefer@....net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Michael Ellerman <mpe@...erman.id.au>
Subject: [PATCH v3 4/4] powerpc: wii.dts: Add GPIO line names
These are the GPIO line names on a Nintendo Wii, as documented in:
https://wiibrew.org/wiki/Hardware/Hollywood_GPIOs
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@....net>
---
v2, v3:
- no change
---
arch/powerpc/boot/dts/wii.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts
index 7235e375919c..07d5e84e98b1 100644
--- a/arch/powerpc/boot/dts/wii.dts
+++ b/arch/powerpc/boot/dts/wii.dts
@@ -178,6 +178,14 @@
gpio-controller;
ngpios = <24>;
+ gpio-line-names =
+ "POWER", "SHUTDOWN", "FAN", "DC_DC",
+ "DI_SPIN", "SLOT_LED", "EJECT_BTN", "SLOT_IN",
+ "SENSOR_BAR", "DO_EJECT", "EEP_CS", "EEP_CLK",
+ "EEP_MOSI", "EEP_MISO", "AVE_SCL", "AVE_SDA",
+ "DEBUG0", "DEBUG1", "DEBUG2", "DEBUG3",
+ "DEBUG4", "DEBUG5", "DEBUG6", "DEBUG7";
+
/*
* This is commented out while a standard binding
* for i2c over gpio is defined.
--
2.15.1
Powered by blists - more mailing lists