Date:   Fri,  9 Feb 2018 19:38:11 +0200
From:   Georgiana Chelu <georgiana.chelu93@...il.com>
To:     linux-iio@...r.kernel.org, jic23@...nel.org,
        daniel.baluta@...il.com
Cc:     linux-kernel@...r.kernel.org, knaack.h@....de, lars@...afoo.de,
        pmeerw@...erw.net, akinobu.mita@...il.com, jan.kiszka@...mens.com
Subject: [RFC PATCH] iio: adc: ti-ads1015: Refactor code to support SPI

We want to add support for ads1118 which uses SPI interface.
In order to do that we first refactor existing code into a core
part (bus independent) and an I2C part for current supported
devices.

Next patch will introduce support for ADS1118 which uses
SPI bus for communication.

Cc: Daniel Baluta <daniel.baluta@...il.com>
Signed-off-by: Georgiana Chelu <georgiana.chelu93@...il.com>
---
We are sending this as a RFC for now to get your opinion on the
split. Still working on testing the SPI part.

 drivers/iio/adc/Kconfig          |  12 ++-
 drivers/iio/adc/Makefile         |   1 +
 drivers/iio/adc/ti-ads1015.c     | 194 +++++++++++----------------------------
 drivers/iio/adc/ti-ads1015.h     |  63 +++++++++++++
 drivers/iio/adc/ti-ads1015_i2c.c |  80 ++++++++++++++++
 5 files changed, 204 insertions(+), 146 deletions(-)
 create mode 100644 drivers/iio/adc/ti-ads1015.h
 create mode 100644 drivers/iio/adc/ti-ads1015_i2c.c

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 10f3ede91d3a..846793a0e827 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -774,17 +774,21 @@ config TI_ADC161S626
 	  called ti-adc161s626.
 
 config TI_ADS1015
-	tristate "Texas Instruments ADS1015 ADC"
-	depends on I2C && !SENSORS_ADS1015
-	select REGMAP_I2C
+	tristate
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
+
+config TI_ADS1015_I2C
+	tristate "Texas Instruments ADS1015 I2C ADC"
+	depends on I2C && !SENSORS_ADS1015
+	select REGMAP_I2C
+	select TI_ADS1015
 	help
 	  If you say yes here you get support for Texas Instruments ADS1015
 	  ADC chip.
 
 	  This driver can also be built as a module. If so, the module will be
-	  called ti-ads1015.
+	  called ti-ads1015_i2c.
 
 config TI_ADS7950
 	tristate "Texas Instruments ADS7950 ADC driver"
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 9572c1090f35..c5c30b7cda64 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_TI_ADC108S102) += ti-adc108s102.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
+obj-$(CONFIG_TI_ADS1015_I2C) += ti-ads1015_i2c.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 6a114dcb4a3a..62898a0da4dd 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -6,19 +6,12 @@
  * This file is subject to the terms and conditions of version 2 of
  * the GNU General Public License.  See the file COPYING in the main
  * directory of this archive for more details.
- *
- * IIO driver for ADS1015 ADC 7-bit I2C slave address:
- *	* 0x48 - ADDR connected to Ground
- *	* 0x49 - ADDR connected to Vdd
- *	* 0x4A - ADDR connected to SDA
- *	* 0x4B - ADDR connected to SCL
  */
 
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/i2c.h>
 #include <linux/regmap.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
@@ -34,55 +27,7 @@
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/trigger_consumer.h>
 
-#define ADS1015_DRV_NAME "ads1015"
-
-#define ADS1015_CONV_REG	0x00
-#define ADS1015_CFG_REG		0x01
-#define ADS1015_LO_THRESH_REG	0x02
-#define ADS1015_HI_THRESH_REG	0x03
-
-#define ADS1015_CFG_COMP_QUE_SHIFT	0
-#define ADS1015_CFG_COMP_LAT_SHIFT	2
-#define ADS1015_CFG_COMP_POL_SHIFT	3
-#define ADS1015_CFG_COMP_MODE_SHIFT	4
-#define ADS1015_CFG_DR_SHIFT	5
-#define ADS1015_CFG_MOD_SHIFT	8
-#define ADS1015_CFG_PGA_SHIFT	9
-#define ADS1015_CFG_MUX_SHIFT	12
-
-#define ADS1015_CFG_COMP_QUE_MASK	GENMASK(1, 0)
-#define ADS1015_CFG_COMP_LAT_MASK	BIT(2)
-#define ADS1015_CFG_COMP_POL_MASK	BIT(3)
-#define ADS1015_CFG_COMP_MODE_MASK	BIT(4)
-#define ADS1015_CFG_DR_MASK	GENMASK(7, 5)
-#define ADS1015_CFG_MOD_MASK	BIT(8)
-#define ADS1015_CFG_PGA_MASK	GENMASK(11, 9)
-#define ADS1015_CFG_MUX_MASK	GENMASK(14, 12)
-
-/* Comparator queue and disable field */
-#define ADS1015_CFG_COMP_DISABLE	3
-
-/* Comparator polarity field */
-#define ADS1015_CFG_COMP_POL_LOW	0
-#define ADS1015_CFG_COMP_POL_HIGH	1
-
-/* Comparator mode field */
-#define ADS1015_CFG_COMP_MODE_TRAD	0
-#define ADS1015_CFG_COMP_MODE_WINDOW	1
-
-/* device operating modes */
-#define ADS1015_CONTINUOUS	0
-#define ADS1015_SINGLESHOT	1
-
-#define ADS1015_SLEEP_DELAY_MS		2000
-#define ADS1015_DEFAULT_PGA		2
-#define ADS1015_DEFAULT_DATA_RATE	4
-#define ADS1015_DEFAULT_CHAN		0
-
-enum chip_ids {
-	ADS1015,
-	ADS1115,
-};
+#include "ti-ads1015.h"
 
 enum ads1015_channels {
 	ADS1015_AIN0_AIN1 = 0,
@@ -229,6 +174,8 @@ struct ads1015_thresh_data {
 };
 
 struct ads1015_data {
+	enum chip_ids chip_id;
+	struct device *dev;
 	struct regmap *regmap;
 	/*
 	 * Protects ADC ops, e.g: concurrent sysfs/buffered
@@ -281,12 +228,13 @@ static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-static const struct regmap_config ads1015_regmap_config = {
+const struct regmap_config ads1015_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
 	.max_register = ADS1015_HI_THRESH_REG,
 	.writeable_reg = ads1015_is_writeable_reg,
 };
+EXPORT_SYMBOL(ads1015_regmap_config);
 
 static const struct iio_chan_spec ads1015_channels[] = {
 	ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1),
@@ -841,31 +789,29 @@ static const struct iio_info ads1115_info = {
 };
 
 #ifdef CONFIG_OF
-static int ads1015_get_channels_config_of(struct i2c_client *client)
+static int ads1015_get_channels_config_of(struct ads1015_data *data)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ads1015_data *data = iio_priv(indio_dev);
 	struct device_node *node;
 
-	if (!client->dev.of_node ||
-	    !of_get_next_child(client->dev.of_node, NULL))
+	if (!data->dev->of_node ||
+	    !of_get_next_child(data->dev->of_node, NULL))
 		return -EINVAL;
 
-	for_each_child_of_node(client->dev.of_node, node) {
+	for_each_child_of_node(data->dev->of_node, node) {
 		u32 pval;
 		unsigned int channel;
 		unsigned int pga = ADS1015_DEFAULT_PGA;
 		unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
 
 		if (of_property_read_u32(node, "reg", &pval)) {
-			dev_err(&client->dev, "invalid reg on %pOF\n",
+			dev_err(data->dev, "invalid reg on %pOF\n",
 				node);
 			continue;
 		}
 
 		channel = pval;
 		if (channel >= ADS1015_CHANNELS) {
-			dev_err(&client->dev,
+			dev_err(data->dev,
 				"invalid channel index %d on %pOF\n",
 				channel, node);
 			continue;
@@ -874,7 +820,7 @@ static int ads1015_get_channels_config_of(struct i2c_client *client)
 		if (!of_property_read_u32(node, "ti,gain", &pval)) {
 			pga = pval;
 			if (pga > 6) {
-				dev_err(&client->dev, "invalid gain on %pOF\n",
+				dev_err(data->dev, "invalid gain on %pOF\n",
 					node);
 				of_node_put(node);
 				return -EINVAL;
@@ -884,7 +830,7 @@ static int ads1015_get_channels_config_of(struct i2c_client *client)
 		if (!of_property_read_u32(node, "ti,datarate", &pval)) {
 			data_rate = pval;
 			if (data_rate > 7) {
-				dev_err(&client->dev,
+				dev_err(data->dev,
 					"invalid data_rate on %pOF\n",
 					node);
 				of_node_put(node);
@@ -900,13 +846,12 @@ static int ads1015_get_channels_config_of(struct i2c_client *client)
 }
 #endif
 
-static void ads1015_get_channels_config(struct i2c_client *client)
+static void ads1015_get_channels_config(struct ads1015_data *data)
 {
 	unsigned int k;
+	struct ads1015_platform_data *pdata;
 
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
-	struct ads1015_data *data = iio_priv(indio_dev);
-	struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
+	pdata = dev_get_platdata(data->dev);
 
 	/* prefer platform data */
 	if (pdata) {
@@ -916,7 +861,7 @@ static void ads1015_get_channels_config(struct i2c_client *client)
 	}
 
 #ifdef CONFIG_OF
-	if (!ads1015_get_channels_config_of(client))
+	if (!ads1015_get_channels_config_of(data))
 		return;
 #endif
 	/* fallback on default configuration */
@@ -933,33 +878,32 @@ static int ads1015_set_conv_mode(struct ads1015_data *data, int mode)
 				  mode << ADS1015_CFG_MOD_SHIFT);
 }
 
-static int ads1015_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+int ads1015_core_probe(struct device *dev, struct regmap *regmap,
+		       const char *name, int irq, unsigned int chip_id)
 {
 	struct iio_dev *indio_dev;
 	struct ads1015_data *data;
-	int ret;
+	int ret, i;
 	enum chip_ids chip;
-	int i;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
-	i2c_set_clientdata(client, indio_dev);
+	dev_set_drvdata(dev, data);
 
 	mutex_init(&data->lock);
 
-	indio_dev->dev.parent = &client->dev;
-	indio_dev->dev.of_node = client->dev.of_node;
-	indio_dev->name = ADS1015_DRV_NAME;
+	indio_dev->dev.parent = dev;
+	indio_dev->dev.of_node = dev->of_node;
+	indio_dev->name = name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	if (client->dev.of_node)
-		chip = (enum chip_ids)of_device_get_match_data(&client->dev);
+	if (dev->of_node)
+		chip = (enum chip_ids)of_device_get_match_data(dev);
 	else
-		chip = id->driver_data;
+		chip = chip_id;
 	switch (chip) {
 	case ADS1015:
 		indio_dev->channels = ads1015_channels;
@@ -988,25 +932,21 @@ static int ads1015_probe(struct i2c_client *client,
 	}
 
 	/* we need to keep this ABI the same as used by hwmon ADS1015 driver */
-	ads1015_get_channels_config(client);
+	ads1015_get_channels_config(data);
 
-	data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config);
-	if (IS_ERR(data->regmap)) {
-		dev_err(&client->dev, "Failed to allocate register map\n");
-		return PTR_ERR(data->regmap);
-	}
+	data->regmap = regmap;
 
-	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
 					      ads1015_trigger_handler,
 					      &ads1015_buffer_setup_ops);
 	if (ret < 0) {
-		dev_err(&client->dev, "iio triggered buffer setup failed\n");
+		dev_err(dev, "iio triggered buffer setup failed\n");
 		return ret;
 	}
 
-	if (client->irq) {
+	if (irq) {
 		unsigned long irq_trig =
-			irqd_get_trigger_type(irq_get_irq_data(client->irq));
+			irqd_get_trigger_type(irq_get_irq_data(irq));
 		unsigned int cfg_comp_mask = ADS1015_CFG_COMP_QUE_MASK |
 			ADS1015_CFG_COMP_LAT_MASK | ADS1015_CFG_COMP_POL_MASK;
 		unsigned int cfg_comp =
@@ -1031,10 +971,10 @@ static int ads1015_probe(struct i2c_client *client,
 		if (ret)
 			return ret;
 
-		ret = devm_request_threaded_irq(&client->dev, client->irq,
+		ret = devm_request_threaded_irq(dev, irq,
 						NULL, ads1015_event_handler,
 						irq_trig | IRQF_ONESHOT,
-						client->name, indio_dev);
+						name, indio_dev);
 		if (ret)
 			return ret;
 	}
@@ -1045,41 +985,43 @@ static int ads1015_probe(struct i2c_client *client,
 
 	data->conv_invalid = true;
 
-	ret = pm_runtime_set_active(&client->dev);
+	ret = pm_runtime_set_active(dev);
 	if (ret)
 		return ret;
-	pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS);
-	pm_runtime_use_autosuspend(&client->dev);
-	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(dev, ADS1015_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_enable(dev);
 
 	ret = iio_device_register(indio_dev);
 	if (ret < 0) {
-		dev_err(&client->dev, "Failed to register IIO device\n");
+		dev_err(dev, "Failed to register IIO device\n");
 		return ret;
 	}
 
 	return 0;
 }
+EXPORT_SYMBOL(ads1015_core_probe);
 
-static int ads1015_remove(struct i2c_client *client)
+int ads1015_core_remove(struct device *dev)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ads1015_data *data = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
 
-	pm_runtime_disable(&client->dev);
-	pm_runtime_set_suspended(&client->dev);
-	pm_runtime_put_noidle(&client->dev);
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
 
 	/* power down single shot mode */
 	return ads1015_set_conv_mode(data, ADS1015_SINGLESHOT);
 }
+EXPORT_SYMBOL(ads1015_core_remove);
 
 #ifdef CONFIG_PM
 static int ads1015_runtime_suspend(struct device *dev)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ads1015_data *data = iio_priv(indio_dev);
 
 	return ads1015_set_conv_mode(data, ADS1015_SINGLESHOT);
@@ -1087,7 +1029,7 @@ static int ads1015_runtime_suspend(struct device *dev)
 
 static int ads1015_runtime_resume(struct device *dev)
 {
-	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct ads1015_data *data = iio_priv(indio_dev);
 	int ret;
 
@@ -1099,43 +1041,11 @@ static int ads1015_runtime_resume(struct device *dev)
 }
 #endif
 
-static const struct dev_pm_ops ads1015_pm_ops = {
+const struct dev_pm_ops ads1015_pm_ops = {
 	SET_RUNTIME_PM_OPS(ads1015_runtime_suspend,
 			   ads1015_runtime_resume, NULL)
 };
-
-static const struct i2c_device_id ads1015_id[] = {
-	{"ads1015", ADS1015},
-	{"ads1115", ADS1115},
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, ads1015_id);
-
-static const struct of_device_id ads1015_of_match[] = {
-	{
-		.compatible = "ti,ads1015",
-		.data = (void *)ADS1015
-	},
-	{
-		.compatible = "ti,ads1115",
-		.data = (void *)ADS1115
-	},
-	{}
-};
-MODULE_DEVICE_TABLE(of, ads1015_of_match);
-
-static struct i2c_driver ads1015_driver = {
-	.driver = {
-		.name = ADS1015_DRV_NAME,
-		.of_match_table = ads1015_of_match,
-		.pm = &ads1015_pm_ops,
-	},
-	.probe		= ads1015_probe,
-	.remove		= ads1015_remove,
-	.id_table	= ads1015_id,
-};
-
-module_i2c_driver(ads1015_driver);
+EXPORT_SYMBOL_GPL(ads1015_pm_ops);
 
 MODULE_AUTHOR("Daniel Baluta <daniel.baluta@...el.com>");
 MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver");
diff --git a/drivers/iio/adc/ti-ads1015.h b/drivers/iio/adc/ti-ads1015.h
new file mode 100644
index 000000000000..746f4cdc7637
--- /dev/null
+++ b/drivers/iio/adc/ti-ads1015.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TI_ADS1015_H_
+#define _TI_ADS1015_H_
+
+#define ADS1015_DRV_NAME "ads1015"
+
+#define ADS1015_CONV_REG	0x00
+#define ADS1015_CFG_REG		0x01
+#define ADS1015_LO_THRESH_REG	0x02
+#define ADS1015_HI_THRESH_REG	0x03
+
+#define ADS1015_CFG_COMP_QUE_SHIFT	0
+#define ADS1015_CFG_COMP_LAT_SHIFT	2
+#define ADS1015_CFG_COMP_POL_SHIFT	3
+#define ADS1015_CFG_COMP_MODE_SHIFT	4
+#define ADS1015_CFG_DR_SHIFT	5
+#define ADS1015_CFG_MOD_SHIFT	8
+#define ADS1015_CFG_PGA_SHIFT	9
+#define ADS1015_CFG_MUX_SHIFT	12
+
+#define ADS1015_CFG_COMP_QUE_MASK	GENMASK(1, 0)
+#define ADS1015_CFG_COMP_LAT_MASK	BIT(2)
+#define ADS1015_CFG_COMP_POL_MASK	BIT(3)
+#define ADS1015_CFG_COMP_MODE_MASK	BIT(4)
+#define ADS1015_CFG_DR_MASK	GENMASK(7, 5)
+#define ADS1015_CFG_MOD_MASK	BIT(8)
+#define ADS1015_CFG_PGA_MASK	GENMASK(11, 9)
+#define ADS1015_CFG_MUX_MASK	GENMASK(14, 12)
+
+/* Comparator queue and disable field */
+#define ADS1015_CFG_COMP_DISABLE	3
+
+/* Comparator polarity field */
+#define ADS1015_CFG_COMP_POL_LOW	0
+#define ADS1015_CFG_COMP_POL_HIGH	1
+
+/* Comparator mode field */
+#define ADS1015_CFG_COMP_MODE_TRAD	0
+#define ADS1015_CFG_COMP_MODE_WINDOW	1
+
+/* device operating modes */
+#define ADS1015_CONTINUOUS	0
+#define ADS1015_SINGLESHOT	1
+
+#define ADS1015_SLEEP_DELAY_MS		2000
+#define ADS1015_DEFAULT_PGA		21
+#define ADS1015_DEFAULT_DATA_RATE	4
+#define ADS1015_DEFAULT_CHAN		0
+
+enum chip_ids {
+	ADS1015,
+	ADS1115,
+};
+
+extern const struct regmap_config ads1015_regmap_config;
+
+int ads1015_core_probe(struct device *dev, struct regmap *regmap,
+		       const char *name, int irq, unsigned int chip);
+int ads1015_core_remove(struct device *dev);
+
+extern const struct dev_pm_ops ads1015_pm_ops;
+
+#endif /* _TI_ADS1015_H_ */
diff --git a/drivers/iio/adc/ti-ads1015_i2c.c b/drivers/iio/adc/ti-ads1015_i2c.c
new file mode 100644
index 000000000000..68db9983a37f
--- /dev/null
+++ b/drivers/iio/adc/ti-ads1015_i2c.c
@@ -0,0 +1,80 @@
+/*
+ * ADS1015 Texas Instruments ADC, I2C bits
+ *
+ * Copyright (C) 2018 Georgiana Chelu <georgiana.chelu93@...il.com>
+ *
+ * IIO driver for ADS1015 ADC 7-bit I2C slave address:
+ *	* 0x48 - ADDR connected to Ground
+ *	* 0x49 - ADDR connected to Vdd
+ *	* 0x4A - ADDR connected to SDA
+ *	* 0x4B - ADDR connected to SCL
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include "ti-ads1015.h"
+
+static int ads1015_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "failed to allocate i2c register map\n");
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+
+	return ads1015_core_probe(&client->dev, regmap, name,
+				  client->irq, id->driver_data);
+}
+
+static int ads1015_i2c_remove(struct i2c_client *client)
+{
+	return ads1015_core_remove(&client->dev);
+}
+
+static const struct i2c_device_id ads1015_i2c_id[] = {
+	{"ads1015", ADS1015},
+	{"ads1115", ADS1115},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ads1015_i2c_id);
+
+static const struct of_device_id ads1015_of_i2c_match[] = {
+	{
+		.compatible = "ti,ads1015",
+		.data = (void *)ADS1015
+	},
+	{
+		.compatible = "ti,ads1115",
+		.data = (void *)ADS1115
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ads1015_of_i2c_match);
+
+static struct i2c_driver ads1015_i2c_driver = {
+	.driver = {
+		.name = ADS1015_DRV_NAME,
+		.of_match_table = of_match_ptr(ads1015_of_i2c_match),
+		.pm = &ads1015_pm_ops,
+	},
+	.probe		= ads1015_i2c_probe,
+	.remove		= ads1015_i2c_remove,
+	.id_table	= ads1015_i2c_id,
+};
+
+module_i2c_driver(ads1015_i2c_driver);
+
+MODULE_AUTHOR("Georgiana Chelu <georgiana.chelu93@...il.com>");
+MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver I2C");
+MODULE_LICENSE("GPL v2");
-- 
2.14.1

Powered by blists - more mailing lists