[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180209224849.GH19627@roeck-us.net>
Date: Fri, 9 Feb 2018 14:48:49 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Marcus Folkesson <marcus.folkesson@...il.com>
Cc: Wim Van Sebroeck <wim@...ana.be>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Carlo Caione <carlo@...one.org>,
Kevin Hilman <khilman@...libre.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Barry Song <baohua@...nel.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Linus Walleij <linus.walleij@...aro.org>,
Vladimir Zapolskiy <vz@...ia.com>,
Sylvain Lemieux <slemieux.tyco@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH 6/7] watchdog: meson: allow setting timeout in devicetree
On Fri, Feb 09, 2018 at 08:27:23PM +0100, Marcus Folkesson wrote:
> watchdog_init_timeout() will allways pick timeout_param since it
> defaults to a valid timeout.
>
> By following best practice described in
> Documentation/watchdog/watchdog-kernel-api.txt, it also
> let us to set timout-sec property in devicetree.
>
> Signed-off-by: Marcus Folkesson <marcus.folkesson@...il.com>
Reviewed-by: Guenetr Roeck <linux@...ck-us.net>
> ---
> Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
> drivers/watchdog/meson_wdt.c | 2 +-
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> index 8a6d84cb36c9..7588cc3971bf 100644
> --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> @@ -9,9 +9,13 @@ Required properties:
> "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
> - reg : Specifies base physical address and size of the registers.
>
> +Optional properties:
> +- timeout-sec: contains the watchdog timeout in seconds.
> +
> Example:
>
> wdt: watchdog@...09900 {
> compatible = "amlogic,meson6-wdt";
> reg = <0xc1109900 0x8>;
> + timeout-sec = <10>;
> };
> diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> index 304274c67735..cd0275a6cdac 100644
> --- a/drivers/watchdog/meson_wdt.c
> +++ b/drivers/watchdog/meson_wdt.c
> @@ -36,7 +36,7 @@
> #define MESON_SEC_TO_TC(s, c) ((s) * (c))
>
> static bool nowayout = WATCHDOG_NOWAYOUT;
> -static unsigned int timeout = MESON_WDT_TIMEOUT;
> +static unsigned int timeout;
>
> struct meson_wdt_data {
> unsigned int enable;
> --
> 2.15.1
>
Powered by blists - more mailing lists