linux-kernel - Re: [PATCH 6/7] watchdog: meson: allow setting timeout in devicetree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 10 Feb 2018 00:19:10 +0100
From:   Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To:     Guenter Roeck <linux@...ck-us.net>
Cc:     Marcus Folkesson <marcus.folkesson@...il.com>,
        Wim Van Sebroeck <wim@...ana.be>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Carlo Caione <carlo@...one.org>,
        Kevin Hilman <khilman@...libre.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Barry Song <baohua@...nel.org>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>,
        Chen-Yu Tsai <wens@...e.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Vladimir Zapolskiy <vz@...ia.com>,
        Sylvain Lemieux <slemieux.tyco@...il.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH 6/7] watchdog: meson: allow setting timeout in devicetree

Hi Guenter,

On 09/02/2018 at 14:48:49 -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:23PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > By following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt, it also
> > let us to set timout-sec property in devicetree.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@...il.com>
> 
> Reviewed-by: Guenetr Roeck <linux@...ck-us.net>
                  ^
A small typo in your name


> > ---
> >  Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
> >  drivers/watchdog/meson_wdt.c                             | 2 +-
> >  2 files changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > index 8a6d84cb36c9..7588cc3971bf 100644
> > --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > @@ -9,9 +9,13 @@ Required properties:
> >  	"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
> >  - reg : Specifies base physical address and size of the registers.
> >  
> > +Optional properties:
> > +- timeout-sec: contains the watchdog timeout in seconds.
> > +
> >  Example:
> >  
> >  wdt: watchdog@...09900 {
> >  	compatible = "amlogic,meson6-wdt";
> >  	reg = <0xc1109900 0x8>;
> > +	timeout-sec = <10>;
> >  };
> > diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> > index 304274c67735..cd0275a6cdac 100644
> > --- a/drivers/watchdog/meson_wdt.c
> > +++ b/drivers/watchdog/meson_wdt.c
> > @@ -36,7 +36,7 @@
> >  #define MESON_SEC_TO_TC(s, c)	((s) * (c))
> >  
> >  static bool nowayout = WATCHDOG_NOWAYOUT;
> > -static unsigned int timeout = MESON_WDT_TIMEOUT;
> > +static unsigned int timeout;
> >  
> >  struct meson_wdt_data {
> >  	unsigned int enable;
> > -- 
> > 2.15.1
> > 

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com