[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180211200847.25000-6-marcus.folkesson@gmail.com>
Date: Sun, 11 Feb 2018 21:08:46 +0100
From: Marcus Folkesson <marcus.folkesson@...il.com>
To: Wim Van Sebroeck <wim@...ana.be>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Carlo Caione <carlo@...one.org>,
Kevin Hilman <khilman@...libre.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Barry Song <baohua@...nel.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>,
Linus Walleij <linus.walleij@...aro.org>,
Vladimir Zapolskiy <vz@...ia.com>,
Sylvain Lemieux <slemieux.tyco@...il.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Cc: linux-watchdog@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-amlogic@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-mediatek@...ts.infradead.org,
Marcus Folkesson <marcus.folkesson@...il.com>
Subject: [PATCH v3 6/7] watchdog: meson: allow setting timeout in devicetree
watchdog_init_timeout() will allways pick timeout_param since it
defaults to a valid timeout.
By following best practice described in
Documentation/watchdog/watchdog-kernel-api.txt, it also
let us to set timout-sec property in devicetree.
Signed-off-by: Marcus Folkesson <marcus.folkesson@...il.com>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
---
Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
drivers/watchdog/meson_wdt.c | 2 +-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
index 8a6d84cb36c9..7588cc3971bf 100644
--- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
@@ -9,9 +9,13 @@ Required properties:
"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
- reg : Specifies base physical address and size of the registers.
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
Example:
wdt: watchdog@...09900 {
compatible = "amlogic,meson6-wdt";
reg = <0xc1109900 0x8>;
+ timeout-sec = <10>;
};
diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
index 304274c67735..cd0275a6cdac 100644
--- a/drivers/watchdog/meson_wdt.c
+++ b/drivers/watchdog/meson_wdt.c
@@ -36,7 +36,7 @@
#define MESON_SEC_TO_TC(s, c) ((s) * (c))
static bool nowayout = WATCHDOG_NOWAYOUT;
-static unsigned int timeout = MESON_WDT_TIMEOUT;
+static unsigned int timeout;
struct meson_wdt_data {
unsigned int enable;
--
2.15.1
Powered by blists - more mailing lists