| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Feb 2018 14:19:06 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Kieran Bingham <kbingham@...nel.org>
Cc: linux-media@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
Kieran Bingham <kieran.bingham@...asonboard.com>,
Jean-Michel Hautbois <jean-michel.hautbois@...alys.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Hans Verkuil <hans.verkuil@...co.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Subject: Re: [PATCH v3 4/5] media: adv7604: Add support for i2c_new_secondary_device
Hi Kieran,
Thank you for the patch.
On Tuesday, 13 February 2018 00:07:52 EET Kieran Bingham wrote:
> From: Jean-Michel Hautbois <jean-michel.hautbois@...alys.com>
>
> The ADV7604 has thirteen 256-byte maps that can be accessed via the main
> I²C ports. Each map has it own I²C address and acts as a standard slave
> device on the I²C bus.
>
> Allow a device tree node to override the default addresses so that
> address conflicts with other devices on the same bus may be resolved at
> the board description level.
>
> Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@...alys.com>
> [Kieran: Re-adapted for mainline]
> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
>
> ---
> Based upon the original posting :
> https://lkml.org/lkml/2014/10/22/469
>
> v2:
> - Split out DT bindings from driver updates
> - Return -EINVAL on error paths from adv76xx_dummy_client()
>
> drivers/media/i2c/adv7604.c | 62 ++++++++++++++++++++++++++----------------
> 1 file changed, 40 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
> index 1544920ec52d..872e124793f8 100644
> --- a/drivers/media/i2c/adv7604.c
> +++ b/drivers/media/i2c/adv7604.c
> @@ -2734,6 +2734,27 @@ static const struct v4l2_ctrl_config
> adv76xx_ctrl_free_run_color = {
>
> /* --------------------------------------------------------------------- */
>
> +struct adv76xx_register {
adv76xx_register seems to imply that this describes a particular register,
while the structure describes a registers map. How about adv76xx_register_map,
adv76xx_register_bank or adv76xx_register_page ?
> + const char *name;
> + u8 default_addr;
> +};
> +
> +static const struct adv76xx_register adv76xx_secondary_names[] = {
The table doesn't contain secondary names only as there's an entry for the
main map. How about calling it adv76xx_default_addresses or something along
the same line ?
> + [ADV76XX_PAGE_IO] = { "main", 0x4c },
> + [ADV7604_PAGE_AVLINK] = { "avlink", 0x42 },
> + [ADV76XX_PAGE_CEC] = { "cec", 0x40 },
> + [ADV76XX_PAGE_INFOFRAME] = { "infoframe", 0x3e },
> + [ADV7604_PAGE_ESDP] = { "esdp", 0x38 },
> + [ADV7604_PAGE_DPP] = { "dpp", 0x3c },
> + [ADV76XX_PAGE_AFE] = { "afe", 0x26 },
> + [ADV76XX_PAGE_REP] = { "rep", 0x32 },
> + [ADV76XX_PAGE_EDID] = { "edid", 0x36 },
> + [ADV76XX_PAGE_HDMI] = { "hdmi", 0x34 },
> + [ADV76XX_PAGE_TEST] = { "test", 0x30 },
> + [ADV76XX_PAGE_CP] = { "cp", 0x22 },
> + [ADV7604_PAGE_VDP] = { "vdp", 0x24 },
> +};
> +
> static int adv76xx_core_init(struct v4l2_subdev *sd)
> {
> struct adv76xx_state *state = to_state(sd);
> @@ -2834,13 +2855,26 @@ static void adv76xx_unregister_clients(struct
> adv76xx_state *state) }
>
> static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd,
> - u8 addr, u8 io_reg)
> + unsigned int i)
Maybe unsigned int page ?
With these fixed,
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct adv76xx_state *state = to_state(sd);
> + struct adv76xx_platform_data *pdata = &state->pdata;
> + unsigned int io_reg = 0xf2 + i;
> + struct i2c_client *new_client;
> +
> + if (pdata && pdata->i2c_addresses[i])
> + new_client = i2c_new_dummy(client->adapter,
> + pdata->i2c_addresses[i]);
> + else
> + new_client = i2c_new_secondary_device(client,
> + adv76xx_secondary_names[i].name,
> + adv76xx_secondary_names[i].default_addr);
>
> - if (addr)
> - io_write(sd, io_reg, addr << 1);
> - return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1);
> + if (new_client)
> + io_write(sd, io_reg, new_client->addr << 1);
> +
> + return new_client;
> }
>
> static const struct adv76xx_reg_seq adv7604_recommended_settings_afe[] = {
> @@ -3115,20 +3149,6 @@ static int adv76xx_parse_dt(struct adv76xx_state
> *state) /* Disable the interrupt for now as no DT-based board uses it. */
> state->pdata.int1_config = ADV76XX_INT1_CONFIG_DISABLED;
>
> - /* Use the default I2C addresses. */
> - state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_CEC] = 0x40;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_INFOFRAME] = 0x3e;
> - state->pdata.i2c_addresses[ADV7604_PAGE_ESDP] = 0x38;
> - state->pdata.i2c_addresses[ADV7604_PAGE_DPP] = 0x3c;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_AFE] = 0x26;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_REP] = 0x32;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_EDID] = 0x36;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_HDMI] = 0x34;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_TEST] = 0x30;
> - state->pdata.i2c_addresses[ADV76XX_PAGE_CP] = 0x22;
> - state->pdata.i2c_addresses[ADV7604_PAGE_VDP] = 0x24;
> -
> /* Hardcode the remaining platform data fields. */
> state->pdata.disable_pwrdnb = 0;
> state->pdata.disable_cable_det_rst = 0;
> @@ -3478,11 +3498,9 @@ static int adv76xx_probe(struct i2c_client *client,
> if (!(BIT(i) & state->info->page_mask))
> continue;
>
> - state->i2c_clients[i] =
> - adv76xx_dummy_client(sd, state->pdata.i2c_addresses[i],
> - 0xf2 + i);
> + state->i2c_clients[i] = adv76xx_dummy_client(sd, i);
> if (!state->i2c_clients[i]) {
> - err = -ENOMEM;
> + err = -EINVAL;
> v4l2_err(sd, "failed to create i2c client %u\n", i);
> goto err_i2c;
> }
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists