[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1518602679-3064-1-git-send-email-fabrice.gasnier@st.com>
Date: Wed, 14 Feb 2018 11:04:31 +0100
From: Fabrice Gasnier <fabrice.gasnier@...com>
To: <lee.jones@...aro.org>, <thierry.reding@...il.com>,
<alexandre.torgue@...com>
CC: <benjamin.gaignard@...aro.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <linux@...linux.org.uk>,
<mcoquelin.stm32@...il.com>, <fabrice.gasnier@...com>,
<benjamin.gaignard@...com>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-pwm@...r.kernel.org>
Subject: [RESEND PATCH v2 0/8] Add support for PWM input capture on STM32
This series adds support for capture to stm32-pwm driver.
Capture is based on DMAs.
- First two patches are precursor patches
- Subsequent two patches add support for requesting DMAs to MFD core
- Next three patches add support for capture to stm32-pwm driver
- This has been tested on stm32429i-eval board.
---
Resend v2:
- Add collected Acks
Changes in v2:
- Abstract DMA handling from child driver: move it to MFD core
- Rework pwm capture routines to adopt this change
- Comment on optional dma support, beautify DMAs probe
Fabrice Gasnier (8):
pwm: stm32: fix, remove unused struct device
pwm: stm32: protect common prescaler for all channels
dt-bindings: mfd: stm32-timers: add support for dmas
mfd: stm32-timers: add support for dmas
pwm: stm32: add capture support
pwm: stm32: improve capture by tuning counter prescaler
pwm: stm32: use input prescaler to improve period capture
ARM: dts: stm32: Enable pwm3 input capture on stm32f429i-eval
.../devicetree/bindings/mfd/stm32-timers.txt | 20 ++
arch/arm/boot/dts/stm32429i-eval.dts | 3 +
drivers/mfd/stm32-timers.c | 215 +++++++++++++++-
drivers/pwm/pwm-stm32.c | 276 ++++++++++++++++++++-
include/linux/mfd/stm32-timers.h | 39 +++
5 files changed, 547 insertions(+), 6 deletions(-)
--
1.9.1
Powered by blists - more mailing lists