[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.15.0-rc4-3.g809d3f7-default (geeko@buildhost) (gcc version 7.2.1 20171020 [gcc-7-branch revision 253932] (SUSE Linux)) #1 SMP Fri Dec 22 10:26:00 UTC 2017 (809d3f7) [ 0.000000] Machine model: Raspberry Pi 3 Model B [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.05 by Das U-boot [ 0.000000] efi: SMBIOS=0x35b0e000 [ 0.000000] cma: Reserved 256 MiB at 0x0000000015400000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x0000000036ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x36fe0300-0x36fe1dff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000036ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000000000fff] [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000035b0dfff] [ 0.000000] node 0: [mem 0x0000000035b0e000-0x0000000035b0efff] [ 0.000000] node 0: [mem 0x0000000035b0f000-0x0000000036f86fff] [ 0.000000] node 0: [mem 0x0000000036f87000-0x0000000036f87fff] [ 0.000000] node 0: [mem 0x0000000036f88000-0x0000000036ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000036ffffff] [ 0.000000] On node 0 totalpages: 225280 [ 0.000000] DMA zone: 3520 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 225280 pages, LIFO batch:31 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 25 pages/cpu @ (ptrval) s62616 r8192 d31592 u102400 [ 0.000000] pcpu-alloc: s62616 r8192 d31592 u102400 alloc=25*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 221760 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-4.15.0-rc4-3.g809d3f7-default root=UUID=e70a1a15-cf94-46da-9a9c-5cb5abc296ad root=/dev/disk/by-id/mmc-00000_0x55353082-part2 disk=/dev/disk/by-id/mmc-00000_0x55353082 resume=/dev/disk/by-id/mmc-00000_0x55353082-part3 quiet splash=silent plymouth.enable=0 console=ttyS0,115200n8 console=tty cma=256MB [ 0.000000] Memory: 592660K/901120K available (9148K kernel code, 1596K rwdata, 4032K rodata, 5056K init, 1028K bss, 46316K reserved, 262144K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9152 KB) [ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 4096 KB) [ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 5056 KB) [ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1597 KB) [ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 1029 KB) [ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7e0000000000 - 0xffff7e0000dc0000 ( 13 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff800037000000 ( 880 MB) [ 0.000000] ftrace: allocating 34715 entries in 136 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.000000] arch_timer: WARNING: Please fix your firmware [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000406] Console: colour dummy device 80x25 [ 0.000419] console [tty0] enabled [ 0.000481] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000490] pid_max: default: 32768 minimum: 301 [ 0.000616] Security Framework initialized [ 0.000689] AppArmor: AppArmor initialized [ 0.001776] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.002273] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.002324] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.002346] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.003650] ASID allocator initialised with 65536 entries [ 0.003733] Hierarchical SRCU implementation. [ 0.005343] Remapping and enabling EFI services. [ 0.005387] EFI remap 0x0000000035b0e000 => (ptrval) [ 0.005392] EFI remap 0x0000000036f87000 => (ptrval) [ 0.005396] EFI remap 0x000000003f100000 => (ptrval) [ 0.005710] smp: Bringing up secondary CPUs ... [ 0.006310] Detected VIPT I-cache on CPU1 [ 0.006356] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.006358] arch_timer: WARNING: Please fix your firmware [ 0.006367] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.007088] Detected VIPT I-cache on CPU2 [ 0.007114] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.007116] arch_timer: WARNING: Please fix your firmware [ 0.007123] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.007767] Detected VIPT I-cache on CPU3 [ 0.007787] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low [ 0.007788] arch_timer: WARNING: Please fix your firmware [ 0.007796] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.007909] smp: Brought up 1 node, 4 CPUs [ 0.007914] SMP: Total of 4 processors activated. [ 0.007919] CPU features: detected feature: 32-bit EL0 Support [ 0.008136] CPU: All CPU(s) started at EL2 [ 0.008160] alternatives: patching kernel code [ 0.008953] devtmpfs: initialized [ 0.013445] Registered cp15_barrier emulation handler [ 0.013457] Registered setend emulation handler [ 0.013777] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.013827] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.021417] pinctrl core: initialized pinctrl subsystem [ 0.022352] SMBIOS 3.0 present. [ 0.022365] DMI: raspberrypi rpi/rpi, BIOS 2017.05 05/08/2017 [ 0.022733] NET: Registered protocol family 16 [ 0.024312] audit: initializing netlink subsys (disabled) [ 0.024490] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.025368] cpuidle: using governor ladder [ 0.025466] cpuidle: using governor menu [ 0.025929] vdso: 2 pages (1 code @ 000000003ae86378, 1 data @ 000000000cb2f34c) [ 0.025944] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.027455] DMA: preallocated 256 KiB pool for atomic allocations [ 0.027909] Serial: AMBA PL011 UART driver [ 0.030644] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_ctsrts_gpio32, deferring probe [ 0.040637] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041650] ACPI: Interpreter disabled. [ 0.042097] vgaarb: loaded [ 0.042495] SCSI subsystem initialized [ 0.042653] libata version 3.00 loaded. [ 0.042974] EDAC MC: Ver: 3.0.0 [ 0.043086] EDAC DEBUG: edac_mc_sysfs_init: device mc created [ 0.043275] Registered efivars operations [ 0.043291] efivars: get_next_variable: status=8000000000000007 [ 0.044025] NetLabel: Initializing [ 0.044029] NetLabel: domain hash size = 128 [ 0.044032] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.044095] NetLabel: unlabeled traffic allowed by default [ 0.044397] clocksource: Switched to clocksource arch_sys_counter [ 0.131160] VFS: Disk quotas dquot_6.6.0 [ 0.131284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.132170] AppArmor: AppArmor Filesystem Enabled [ 0.132267] pnp: PnP ACPI: disabled [ 0.145293] NET: Registered protocol family 2 [ 0.146114] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.146286] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) [ 0.146494] TCP: Hash tables configured (established 8192 bind 8192) [ 0.146775] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.146834] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.147174] NET: Registered protocol family 1 [ 0.147217] PCI: CLS 0 bytes, default 128 [ 0.147622] Unpacking initramfs... [ 3.601894] Freeing initrd memory: 6356K [ 3.602549] kvm [1]: 8-bit VMID [ 3.602553] kvm [1]: IDMAP page: 962000 [ 3.602557] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 3.603309] kvm [1]: Invalid trigger for IRQ4, assuming level low [ 3.603351] kvm [1]: kvm_arch_timer: error setting vcpu affinity [ 3.604867] Initialise system trusted keyrings [ 3.605060] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 3.605244] zbud: loaded [ 3.609652] Key type asymmetric registered [ 3.609661] Asymmetric key parser 'x509' registered [ 3.609785] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 3.609906] io scheduler noop registered [ 3.609910] io scheduler deadline registered [ 3.609964] io scheduler cfq registered (default) [ 3.609968] io scheduler kyber registered [ 3.609992] io scheduler bfq registered [ 3.614293] efifb: probing for efifb [ 3.614484] efifb: framebuffer at 0x3d513000, using 7012k, total 7011k [ 3.614489] efifb: mode is 1824x984x32, linelength=7296, pages=1 [ 3.614491] efifb: scrolling: redraw [ 3.614496] efifb: Truecolor: size=8:8:8:8, shift=24:0:8:16 [ 3.636406] Console: switching to colour frame buffer device 228x61 [ 3.657761] fb0: EFI VGA frame buffer device [ 3.662864] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.664499] console [ttyS0] disabled [ 3.664530] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31249999) is a 16550 [ 3.677483] console [ttyS0] enabled [ 3.678666] Serial: AMBA driver [ 3.679257] msm_serial: driver initialized [ 3.680541] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 3.681565] libphy: Fixed MDIO Bus: probed [ 3.682183] mousedev: PS/2 mouse device common for all mice [ 3.685033] ledtrig-cpu: registered to indicate activity on CPUs [ 3.685388] EFI Variables Facility v0.08 2004-May-17 [ 3.685417] efivars: get_next_variable: status=8000000000000007 [ 3.685519] hidraw: raw HID events driver (C) Jiri Kosina [ 3.685905] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 3.687973] NET: Registered protocol family 10 [ 3.713254] Segment Routing with IPv6 [ 3.714810] registered taskstats version 1 [ 3.714833] Loading compiled-in X.509 certificates [ 3.714965] zswap: loaded using pool lzo/zbud [ 3.737457] Key type big_key registered [ 3.748614] Key type encrypted registered [ 3.748635] AppArmor: AppArmor sha1 policy hashing enabled [ 3.753655] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, base_baud = 0) is a PL011 rev2 [ 3.756119] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-09-02 11:49 [ 3.758185] hctosys: unable to open rtc device (rtc0) [ 3.786151] Freeing unused kernel memory: 5056K [ 3.811907] efivars: get_next_variable: status=8000000000000007 [ 3.820125] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 3.821298] systemd[1]: Detected architecture arm64. [ 3.821318] systemd[1]: Running in initial RAM disk. [ 3.821467] systemd[1]: Set hostname to . [ 4.097464] systemd[1]: Listening on Journal Socket. [ 4.097821] systemd[1]: Reached target Timers. [ 4.098344] systemd[1]: Listening on Journal Audit Socket. [ 4.098635] systemd[1]: Listening on udev Control Socket. [ 4.098976] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 4.099046] systemd[1]: Reached target Paths. [ 5.004609] sdhost-bcm2835 3f202000.sdhost: unable to initialise DMA channel. Falling back to PIO [ 5.154518] sdhost-bcm2835 3f202000.sdhost: loaded - DMA disabled [ 5.155215] sdhost-bcm2835 3f202000.sdhost: resetting [ 5.281198] mmc0: host does not support reading read-only switch, assuming write-enable [ 5.282971] mmc0: new high speed SDHC card at address 0001 [ 5.292431] bounce: isa pool size: 16 pages [ 5.292649] mmcblk0: mmc0:0001 00000 14.6 GiB [ 5.295681] mmcblk0: p1 p2 p3 [ 5.578269] PM: Starting manual resume from disk [ 5.579100] PM: Image not found (code -22) [ 5.801684] random: crng init done [ 5.807429] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 6.422364] systemd-journald[150]: Received SIGTERM from PID 1 (systemd). [ 6.514245] systemd: 16 output lines suppressed due to ratelimiting [ 7.933350] EXT4-fs (mmcblk0p2): re-mounted. Opts: nobarrier [ 8.269253] systemd-journald[327]: Received request to flush runtime journal from PID 1 [ 9.872387] sdhci: Secure Digital Host Controller Interface driver [ 9.872402] sdhci: Copyright(c) Pierre Ossman [ 9.886280] sdhci-pltfm: SDHCI platform and OF driver helper [ 9.984829] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO [ 9.988368] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property [ 10.082207] usbcore: registered new interface driver usbfs [ 10.082322] usbcore: registered new interface driver hub [ 10.082551] usbcore: registered new device driver usb [ 10.966182] bcm2835-rng 3f104000.rng: hwrng registered [ 10.967827] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 10.969164] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator [ 10.969285] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator [ 11.020617] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 11.041623] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 11.045995] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 11.057082] Adding 505172k swap on /dev/mmcblk0p3. Priority:-2 extents:1 across:505172k SSFS [ 11.058565] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 11.118179] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 11.268064] mmc1: new high speed SDIO card at address 0001 [ 11.434521] dwc2 3f980000.usb: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 [ 11.434579] dwc2 3f980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM [ 11.436247] dwc2 3f980000.usb: DWC OTG Controller [ 11.436311] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1 [ 11.436387] dwc2 3f980000.usb: irq 41, io mem 0x3f980000 [ 11.437127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 11.437140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.437150] usb usb1: Product: DWC OTG Controller [ 11.437160] usb usb1: Manufacturer: Linux 4.15.0-rc4-3.g809d3f7-default dwc2_hsotg [ 11.437169] usb usb1: SerialNumber: 3f980000.usb [ 11.438243] hub 1-0:1.0: USB hub found [ 11.438318] hub 1-0:1.0: 1 port detected [ 11.538017] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.544560] Registered IR keymap rc-cec [ 11.544897] rc rc0: RC for vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0 [ 11.545210] input: RC for vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0 [ 11.545926] vc4_hdmi 3f902000.hdmi: 'dmas' DT property is missing, no HDMI audio [ 11.546111] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 11.546309] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 11.546792] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 11.547140] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 11.547478] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 11.569784] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.578534] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 11.578555] checking generic (3d513000 6d9000) vs hw (0 ffffffffffffffff) [ 11.578563] fb: switching to vc4drmfb from EFI VGA [ 11.578697] Console: switching to colour dummy device 80x25 [ 11.580626] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 11.580647] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.580654] [drm] Driver supports precise vblank timestamp query. [ 11.586754] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.586779] cfg80211: failed to load regulatory.db [ 11.627445] Console: switching to colour frame buffer device 240x67 [ 11.696464] vc4-drm soc:gpu: fb0: frame buffer device [ 11.762819] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 11.787963] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001 [ 11.799858] usbcore: registered new interface driver brcmfmac [ 11.894493] usb 1-1: new high-speed USB device number 2 using dwc2 [ 12.149147] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 12.149168] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.152659] hub 1-1:1.0: USB hub found [ 12.176530] hub 1-1:1.0: 5 ports detected [ 12.181770] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2 [ 12.182737] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab [ 12.544537] usb 1-1.1: new high-speed USB device number 3 using dwc2 [ 12.703680] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 12.703709] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.824488] usb 1-1.4: new low-speed USB device number 4 using dwc2 [ 12.987449] usb 1-1.4: New USB device found, idVendor=0b38, idProduct=0003 [ 12.987472] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 12.987481] usb 1-1.4: Product: USB-compliant keyboard [ 13.090170] smsc95xx v1.0.6 [ 13.308320] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:69:dc:65 [ 13.308696] usbcore: registered new interface driver smsc95xx [ 13.357161] usbcore: registered new interface driver usbhid [ 13.357178] usbhid: USB HID core driver [ 13.426562] input: USB-compliant keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0B38:0003.0001/input/input1 [ 13.505918] hid-generic 0003:0B38:0003.0001: input,hidraw0: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-3f980000.usb-1.4/input0 [ 13.509938] input: USB-compliant keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:0B38:0003.0002/input/input2 [ 13.575767] hid-generic 0003:0B38:0003.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-3f980000.usb-1.4/input1 [ 14.004312] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 14.004737] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.424561] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.426627] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 15.809012] NET: Registered protocol family 17 [ 34.501723] device-mapper: uevent: version 1.0.3 [ 34.502130] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [193799.841782] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [193799.849662] sdhost-bcm2835 3f202000.sdhost: resetting [193810.081869] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [193810.089748] sdhost-bcm2835 3f202000.sdhost: resetting [193810.161913] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [194410.176784] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [194424.413063] systemd-coredump[16444]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.23d8a3f87c19473e93c439146450854f.327.1514410590000000.xz. [194427.366715] systemd-journald[16449]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [194456.487192] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [194456.495070] sdhost-bcm2835 3f202000.sdhost: resetting [194466.727276] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [194466.735156] sdhost-bcm2835 3f202000.sdhost: resetting [194466.807341] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [195066.822193] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [195077.932349] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [195077.940232] sdhost-bcm2835 3f202000.sdhost: resetting [195088.172423] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [195088.180303] sdhost-bcm2835 3f202000.sdhost: resetting [195088.252458] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [195688.267335] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [195698.737457] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [195698.745333] sdhost-bcm2835 3f202000.sdhost: resetting [195708.977536] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [195708.985415] sdhost-bcm2835 3f202000.sdhost: resetting [195709.057590] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [196309.072491] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [196310.712454] systemd-journald[16675]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [196310.798076] systemd-journald[16675]: Received SIGTERM from PID 1 (systemd). [196418.743407] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [196418.751286] sdhost-bcm2835 3f202000.sdhost: resetting [196428.983516] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [196428.991396] sdhost-bcm2835 3f202000.sdhost: resetting [196429.063555] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [197029.078433] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [197047.094867] systemd-journald[17382]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [197092.668986] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [197092.676866] sdhost-bcm2835 3f202000.sdhost: resetting [197102.909072] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [197102.916950] sdhost-bcm2835 3f202000.sdhost: resetting [197102.989141] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [197703.003876] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [197720.968609] systemd-journald[17435]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [197770.434450] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [197770.442330] sdhost-bcm2835 3f202000.sdhost: resetting [197780.674532] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [197780.682413] sdhost-bcm2835 3f202000.sdhost: resetting [197780.754588] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [198380.769309] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [198386.484664] systemd-journald[17528]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [198414.279613] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [198414.287495] sdhost-bcm2835 3f202000.sdhost: resetting [198424.519689] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [198424.527565] sdhost-bcm2835 3f202000.sdhost: resetting [198424.599743] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [199024.614283] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [199027.830987] systemd-journald[17580]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [199038.887620] systemd-coredump[17576]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.23d8a3f87c19473e93c439146450854f.17528.1514415208000000.xz. [199147.085257] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [199147.093138] sdhost-bcm2835 3f202000.sdhost: resetting [199157.325316] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [199157.333193] sdhost-bcm2835 3f202000.sdhost: resetting [199157.405398] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [199757.419866] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [199778.770075] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [199778.777955] sdhost-bcm2835 3f202000.sdhost: resetting [199789.010157] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [199789.018037] sdhost-bcm2835 3f202000.sdhost: resetting [199789.090191] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [200389.104663] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [200392.241350] systemd-coredump[17677]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.23d8a3f87c19473e93c439146450854f.17580.1514415942000000.xz. [200392.673512] systemd-journald[17701]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [200494.295507] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [200494.303419] sdhost-bcm2835 3f202000.sdhost: resetting [200504.535606] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [200504.543502] sdhost-bcm2835 3f202000.sdhost: resetting [200504.615629] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [201104.630169] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [201111.953630] systemd-journald[18099]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [201138.780453] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [201138.788333] sdhost-bcm2835 3f202000.sdhost: resetting [201149.020530] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [201149.028408] sdhost-bcm2835 3f202000.sdhost: resetting [201149.100592] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [201749.115168] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [201760.225312] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [201760.233191] sdhost-bcm2835 3f202000.sdhost: resetting [201770.465375] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [201770.473255] sdhost-bcm2835 3f202000.sdhost: resetting [201770.545422] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [202370.559771] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [202371.553562] systemd-journald[18396]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [202391.909940] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [202391.917818] sdhost-bcm2835 3f202000.sdhost: resetting [202402.150013] sdhost-bcm2835 3f202000.sdhost: timeout waiting for hardware interrupt. [202402.157891] sdhost-bcm2835 3f202000.sdhost: resetting [202402.230081] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0xe00 [203002.244336] mmc0: Card stuck in programming state! mmcblk0 card_busy_detect [203006.584746] systemd-journald[19961]: File /var/log/journal/4e6350529148997bd46d32525977db97/system.journal corrupted or uncleanly shut down, renaming and replacing. [203007.740753] systemd-coredump[19957]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.23d8a3f87c19473e93c439146450854f.18396.1514419187000000.xz. [203508.078390] fuse init (API version 7.26)