linux-kernel - Re: [PATCH v2] PCI: qcom: add missing supplies required for msm8996

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <79820f4c-5166-852f-1bc5-8cef2ff81a00@mm-sol.com>
Date:   Wed, 14 Feb 2018 18:00:00 +0200
From:   Stanimir Varbanov <svarbanov@...sol.com>
To:     srinivas.kandagatla@...aro.org, stanimir.varbanov@...aro.org,
        linux-pci@...r.kernel.org, bhelgaas@...gle.com
Cc:     linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        robh+dt@...nel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v2] PCI: qcom: add missing supplies required for msm8996

Hi Srini,

Thanks for the patch!

On 02/14/2018 02:06 PM, srinivas.kandagatla@...aro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> 
> This patch adds supplies that are required for msm8996. vdda
> is analog supply that go in to controller, and vddpe_3v3 is
> supply to PCIe endpoint.
> 
> Without these supplies PCIe endpoints which require power supplies are
> not enumerated at all, as there is no one to power it up.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> ---
> Changes since v1:
> 	- specify only one vddpe as suggested by Stan
> 
>  .../devicetree/bindings/pci/qcom,pcie.txt          |  4 ++++
>  drivers/pci/dwc/pcie-qcom.c                        | 24 ++++++++++++++++++++--
>  2 files changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> index 3c9d321b3d3b..1fd703bd73e0 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> @@ -189,6 +189,10 @@
>  	Value type: <phandle>
>  	Definition: A phandle to the analog power supply for IC which generates
>  		    reference clock
> +- vddpe-3v3-supply:

shouldn't it be vddpe_3v3-supply to be aligned with the other supplies?

> +	Usage: optional
> +	Value type: <phandle>
> +	Definition: A phandle to the PCIe endpoint power supply
>  
>  - phys:
>  	Usage: required for apq8084
> diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
> index 3e89909f8cb9..519a2ae416eb 100644
> --- a/drivers/pci/dwc/pcie-qcom.c
> +++ b/drivers/pci/dwc/pcie-qcom.c
> @@ -101,13 +101,14 @@ struct qcom_pcie_resources_1_0_0 {
>  	struct reset_control *core;
>  	struct regulator *vdda;
>  };
> -

please keep above blank line.

> +#define QCOM_PCIE_2_3_2_MAX_SUPPLY	2
>  struct qcom_pcie_resources_2_3_2 {
>  	struct clk *aux_clk;
>  	struct clk *master_clk;
>  	struct clk *slave_clk;
>  	struct clk *cfg_clk;
>  	struct clk *pipe_clk;
> +	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
>  };
>  
>  struct qcom_pcie_resources_2_4_0 {
> @@ -521,6 +522,14 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
>  	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
>  	struct dw_pcie *pci = pcie->pci;
>  	struct device *dev = pci->dev;
> +	int ret;
> +
> +	res->supplies[0].supply = "vdda";
> +	res->supplies[1].supply = "vddpe-3v3";
> +	ret = devm_regulator_bulk_get(dev, QCOM_PCIE_2_3_2_MAX_SUPPLY,
> +				      res->supplies);
> +	if (ret)
> +		return ret;
>  
>  	res->aux_clk = devm_clk_get(dev, "aux");
>  	if (IS_ERR(res->aux_clk))
> @@ -550,6 +559,8 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
>  	clk_disable_unprepare(res->master_clk);
>  	clk_disable_unprepare(res->cfg_clk);
>  	clk_disable_unprepare(res->aux_clk);
> +
> +	regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
>  }
>  
>  static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
> @@ -567,10 +578,16 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
>  	u32 val;
>  	int ret;
>  
> +	ret = regulator_bulk_enable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "cannot enable regulators\n");
> +		return ret;
> +	}
> +
>  	ret = clk_prepare_enable(res->aux_clk);
>  	if (ret) {
>  		dev_err(dev, "cannot prepare/enable aux clock\n");
> -		return ret;
> +		goto err_aux_clk;
>  	}
>  
>  	ret = clk_prepare_enable(res->cfg_clk);
> @@ -621,6 +638,9 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
>  err_cfg_clk:
>  	clk_disable_unprepare(res->aux_clk);
>  
> +err_aux_clk:
> +	regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
> +
>  	return ret;
>  }
>  
> 

-- 
regards,
Stan