[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <5eec2d8e-5ce5-491c-706b-c8aa0b9fdd6a@ti.com>
Date: Thu, 15 Feb 2018 09:43:41 +0200
From: Roger Quadros <rogerq@...com>
To: <balbi@...nel.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/4] usb: dwc3: Add dual-role support using OTG core
Hi Felipe,
On 22/01/18 15:11, Roger Quadros wrote:
> Hi Felipe,
>
> Some platforms (e.g. TI's AM437x) don't have USB ID pin state available
> over GPIO/extcon but need to rely on the DWC3 core's OTG block to
> get the ID pin state instead.
>
> This series implements simple dual-role functionality using DWC3's OTG block.
> Debugfs 'mode' override is also functional so user can switch
> between "otg", "host" or "device" modes for debug.
>
> Although system suspend/resume isn't working yet in mainline for AM437x,
> I've tested this series for system suspend/resume using a local tree.
Any comments on this series?
>
> This series depends on [1] and [2]
>
> [1] https://www.mail-archive.com/linux-usb@vger.kernel.org/msg98771.html
>
> [2] https://www.mail-archive.com/linux-usb@vger.kernel.org/msg98848.html
>
> Roger Quadros (4):
> usb: dwc3: prevent setting PRTCAP to OTG from debugfs
> usb: dwc3: core.h: add some register definitions
> usb: dwc3: add dual role support using OTG block
> ARM: dts: am43xx: Enable dual-role mode for USB1
>
> arch/arm/boot/dts/am437x-gp-evm.dts | 2 +-
> arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
> arch/arm/boot/dts/am43x-epos-evm.dts | 2 +-
> drivers/usb/dwc3/core.c | 70 ++++-
> drivers/usb/dwc3/core.h | 111 ++++++++
> drivers/usb/dwc3/drd.c | 492 +++++++++++++++++++++++++++++++++--
> 6 files changed, 650 insertions(+), 29 deletions(-)
>
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists