linux-kernel - [PATCH v3 1/5] dmaengine: qcom: bam

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180215122511.13517-2-srinivas.kandagatla@linaro.org>
Date:   Thu, 15 Feb 2018 12:25:07 +0000
From:   srinivas.kandagatla@...aro.org
To:     vinod.koul@...el.com, andy.gross@...aro.org,
        dmaengine@...r.kernel.org
Cc:     robh+dt@...nel.org, mark.rutland@....com, david.brown@...aro.org,
        dan.j.williams@...el.com, devicetree@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-soc@...r.kernel.org, yanhe@...cinc.com,
        ramkri@....qualcomm.com, sdharia@...cinc.com,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH v3 1/5] dmaengine: qcom: bam_dma: make bam clk optional

From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>

When BAM is remotely controlled it does not sound correct to control
its clk on Linux side. Make it optional, so that its not mandatory
for remote controlled BAM instances.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
 drivers/dma/qcom/bam_dma.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index d076940e0c69..b79691fcc82d 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -1233,8 +1233,12 @@ static int bam_dma_probe(struct platform_device *pdev)
 						"qcom,controlled-remotely");
 
 	bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
-	if (IS_ERR(bdev->bamclk))
-		return PTR_ERR(bdev->bamclk);
+	if (IS_ERR(bdev->bamclk)) {
+		if (!bdev->controlled_remotely)
+			return PTR_ERR(bdev->bamclk);
+
+		bdev->bamclk = NULL;
+	}
 
 	ret = clk_prepare_enable(bdev->bamclk);
 	if (ret) {
-- 
2.15.1