[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1518701697-14242-2-git-send-email-ludovic.Barre@st.com>
Date: Thu, 15 Feb 2018 14:34:53 +0100
From: Ludovic Barre <ludovic.Barre@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Gerald Baeza <gerald.baeza@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>, Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH 1/5] dt-bindings: mmc: document the stm32 sdmmc bindings
From: Ludovic Barre <ludovic.barre@...com>
Document the binding for stm32 sdmmc controller.
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
.../devicetree/bindings/mmc/st,stm32-sdmmc.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
diff --git a/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
new file mode 100644
index 0000000..52eb1f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/st,stm32-sdmmc.txt
@@ -0,0 +1,35 @@
+* STMicroelectronics STM32 SDMMC controller
+
+The highspeed MMC host controller on STM32 soc family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the sdmmc driver.
+
+Required properties:
+ - compatible: Should be "st,stm32h7-sdmmc"
+ - reg: mmc controller base registers
+ - interrupts: Should contain the interrupt number
+ - clocks: Should contain phandle for the clock feeding the controller
+ - resets: Should contain phandle for the reset feeding the controller
+
+Optional property:
+- st,dirpol: Allow to select direction polarity of external voltage
+ transceiver (which manage data and command direction).
+ if set: Voltage transceiver IOs are driven as output when direction signals are high,
+ else: Voltage transceiver IOs are driven as output when direction signals are low.
+- st,negedge: generate data & command on sdmmc clock falling edge
+- st,pin-ckin: use sdmmc_ckin pin from an external driver to sample
+ the receive data (example: with voltage switch transceiver).
+
+Example:
+ sdmmc1: sdmmc@...07000 {
+ compatible = "st,stm32h7-sdmmc";
+ reg = <0x52007000 0x1000>;
+ interrupts = <49>;
+ clocks = <&rcc SDMMC1_CK>;
+ resets = <&rcc SDMMC1_R>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ };
--
2.7.4
Powered by blists - more mailing lists