linux-kernel - Re: [PATCH 0/4] Move DP phy switch to PHY driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <a9eac594-33d5-6171-51ca-66204008fc1f@ti.com>
Date:   Fri, 16 Feb 2018 16:34:42 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Chris Zhong <zyw@...k-chips.com>,
        <dri-devel@...ts.freedesktop.org>, <robh@...nel.org>,
        <linux-rockchip@...ts.infradead.org>
CC:     <linux-kernel@...r.kernel.org>, <mark.yao@...k-chips.com>,
        <groeck@...omium.org>, <seanpaul@...omium.org>,
        William wu <wulf@...k-chips.com>,
        Rob Herring <robh+dt@...nel.org>,
        David Airlie <airlied@...ux.ie>,
        Shawn Lin <shawn.lin@...k-chips.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Elaine Zhang <zhangqing@...k-chips.com>,
        David Wu <david.wu@...k-chips.com>,
        Heiko Stuebner <heiko@...ech.de>,
        Kever Yang <kever.yang@...k-chips.com>,
        Brian Norris <briannorris@...omium.org>,
        Tomasz Figa <tfiga@...omium.org>,
        Douglas Anderson <dianders@...omium.org>,
        Will Deacon <will.deacon@....com>,
        <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        Jianqun Xu <jay.xu@...k-chips.com>,
        Caesar Wang <wxt@...k-chips.com>,
        Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH 0/4] Move DP phy switch to PHY driver

Hi,

On Friday 10 February 2017 01:14 PM, Chris Zhong wrote:
> 
> There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence
> only one PHY can connect to DP controller at one time, the other should
> be disconnected. The GRF_SOC_CON26 register has a switch bit to do it,
> set this bit means enable PHY 1, clear this bit means enable PHY 0.
> 
> If the board has 2 Type-C ports, the DP driver get the phy id from
> devm_of_phy_get_by_index, and then control this switch according to
> this id. But some others board only has one Type-C port, it may be PHY 0
> or PHY 1. The dts node id can not tell us the correct PHY id. Hence move
> this switch to PHY driver, the PHY driver can distinguish between PHY 0
> and PHY 1, and then write the correct register bit.
> 
> 

Changed subject of "Documentation: bindings: add uphy-dp-sel for Rockchip USB
Type-C PHY" as suggested by Rob, rebased "phy: rockchip-typec: support DP phy
switch" to the latest kernel and merged.

Thanks
Kishon

> 
> Chris Zhong (4):
>   Documentation: bindings: add uphy-dp-sel for Rockchip USB Type-C PHY
>   arm64: dts: rockchip: add rockchip,uphy-dp-sel for Type-C phy
>   phy: rockchip-typec: support DP phy switch
>   drm/rockchip: cdn-dp: remove the DP phy switch
> 
>  Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 5 +++++
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi                     | 2 ++
>  drivers/gpu/drm/rockchip/cdn-dp-core.c                       | 7 -------
>  drivers/phy/phy-rockchip-typec.c                             | 9 +++++++++
>  4 files changed, 16 insertions(+), 7 deletions(-)
>